2,500 research outputs found
The role of symmetry on interface states in magnetic tunnel junctions
When an electron tunnels from a metal into the barrier in a magnetic tunnel
junction it has to cross the interface. Deep in the metal the eigenstates for
the electron can be labelled by the point symmetry group of the bulk but around
the interface this symmetry is reduced and one has to use linear combinations
of the bulk states to form the eigenstates labelled by the irreducible
representations of the point symmetry group of the interface. In this way there
can be states localized at the interface which control tunneling. The
conclusions as to which are the dominant tunneling states are different from
that conventionally found.Comment: 14 pages, 5 figures, accepted in PRB, v2: reference 3 complete
The validity and reliability of the exposure index as a metric for estimating the radiation dose to the patient
Introduction
With the introduction of digital radiography, the feedback between image quality and over-exposure has been partly lost which in some cases has led to a steady increase in dose. Over the years the introduction of exposure index (EI) has been used to resolve this phenomenon referred to as âdose creepâ. Even though EI is often vendor specific it is always a related of the radiation exposure to the detector. Due to the nature of this relationship EI can also be used as a patient dose indicator, however this is not widely investigated in literature.
Methods
A total of 420 dose-area-product (DAP) and EI measurements were taken whilst varying kVp, mAs and body habitus on two different anthropomorphic phantoms (pelvis and chest). Using linear regression, the correlation between EI and DAP were examined. Additionally, two separate region of interest (ROI) placements/per phantom where examined in order to research any effect on EI.
Results
When dividing the data into subsets, a strong correlation between EI and DAP was shown with all R-squared values > 0.987. Comparison between the ROI placements showed a significant difference between EIs for both placements.
Conclusion
This research shows a clear relationship between EI and radiation dose which is dependent on a wide variety of factors such as ROI placement, body habitus. In addition, pathology and manufacturer specific EIâs are likely to be of influence as well.
Implications for practice
The combination of DAP and EI might be used as a patient dose indicator. However, the influencing factors as mentioned in the conclusion should be considered and examined before implementation
Batalin-Vilkovisky Integrals in Finite Dimensions
The Batalin-Vilkovisky method (BV) is the most powerful method to analyze
functional integrals with (infinite-dimensional) gauge symmetries presently
known. It has been invented to fix gauges associated with symmetries that do
not close off-shell. Homological Perturbation Theory is introduced and used to
develop the integration theory behind BV and to describe the BV quantization of
a Lagrangian system with symmetries. Localization (illustrated in terms of
Duistermaat-Heckman localization) as well as anomalous symmetries are discussed
in the framework of BV.Comment: 35 page
Supercritical water (SCW): a new medium to generate novel materials for solar energy applications
Paper presented to the 3rd Southern African Solar Energy Conference, South Africa, 11-13 May, 2015.We present here developments and results from a multidisciplinary experimental program focused on the use of supercritical water (SCW) for energy applications and hydrothermal processing. We highlight our findings from investigating the interaction of organic and inorganic materials with SCW, and also comment on progress with advanced measurement systems. Supercritical water (SCW) possesses unique properties, which have prompted investigation into its usage in a plethora of energy and chemical applications. Beyond its critical point (374 °C and 22.1 MPa), water exhibits unconventional solubility and heat transfer characteristics, which are potentially advantageous. In this paper, we present an overview of our progress in experimental studies of the interaction of SCW with a variety of materials, both organic and inorganic. Our most notable progress has been in the development of several novel materials, designs and experimental techniques for small-scale research, and the use of these designs and techniques for detailed experimental study. The work shown highlights the potential of SCW as a useful medium for solar energy applications, and identifies some intriguing features of SCW research.cf201
The role of RHAMM in cancer: Exposing novel therapeutic vulnerabilities
PUBLISHED 10 August 2022Receptor for hyaluronic acid-mediated motility (RHAMM) is a cell surface receptor for hyaluronic acid that is critical for cell migration and a cell cycle protein involved in microtubule assembly and stability. These functions of RHAMM are required for cellular stress responses and cell cycle progression but are also exploited by tumor cells for malignant progression and metastasis. RHAMM is often overexpressed in tumors and is an independent adverse prognostic factor for a number of cancers such as breast and prostate. Interestingly, pharmacological or genetic inhibition of RHAMM in vitro and in vivo ablates tumor invasiveness and metastatic spread, implicating RHAMM as a potential therapeutic target to restrict tumor growth and improve patient survival. However, RHAMM's pro-tumor activity is dependent on its subcellular distribution, which complicates the design of RHAMM-directed therapies. An alternative approach is to identify downstream signaling pathways that mediate RHAMM-promoted tumor aggressiveness. Herein, we discuss the pro-tumoral roles of RHAMM and elucidate the corresponding regulators and signaling pathways mediating RHAMM downstream events, with a specific focus on strategies to target the RHAMM signaling network in cancer cells.Josephine A. Hinneh, Joanna L. Gillis, Nicole L. Moore, Lisa M. Butler and Margaret M. Centener
Beam Test Results of the BTeV Silicon Pixel Detector
The results of the BTeV silicon pixel detector beam test carried out at
Fermilab in 1999-2000 are reported. The pixel detector spatial resolution has
been studied as a function of track inclination, sensor bias, and readout
threshold.Comment: 8 pages of text, 8 figures, Proceedings paper of Pixel 2000:
International Workshop on Semiconductor Pixel Detectors for Particles and
X-Rays, Genova, June 5-8, 200
Performance of prototype BTeV silicon pixel detectors in a high energy pion beam
The silicon pixel vertex detector is a key element of the BTeV spectrometer.
Sensors bump-bonded to prototype front-end devices were tested in a high energy
pion beam at Fermilab. The spatial resolution and occupancies as a function of
the pion incident angle were measured for various sensor-readout combinations.
The data are compared with predictions from our Monte Carlo simulation and very
good agreement is found.Comment: 24 pages, 20 figure
Beam Test of BTeV Pixel Detectors
The silicon pixel vertex detector is one of the key elements of the BTeV
spectrometer. Detector prototypes were tested in a beam at Fermilab. We report
here on the measured spatial resolution as a function of the incident angles
for different sensor-readout electronics combinations. We compare the results
with predictions from our Monte Carlo simulation.Comment: 7 pages, 5 figures, Invited talk given by J.C. Wang at "Vertex 2000,
9th International Workshop on Vertex Detectors", Michigan, Sept 10-15, 2000.
To be published in NIM
Planck-LFI: Design and Performance of the 4 Kelvin Reference Load Unit
The LFI radiometers use a pseudo-correlation design where the signal from the
sky is continuously compared with a stable reference signal, provided by a
cryogenic reference load system. The reference unit is composed by small
pyramidal horns, one for each radiometer, 22 in total, facing small absorbing
targets, made of a commercial resin ECCOSORB CR (TM), cooled to approximately
4.5 K. Horns and targets are separated by a small gap to allow thermal
decoupling. Target and horn design is optimized for each of the LFI bands,
centered at 70, 44 and 30 GHz. Pyramidal horns are either machined inside the
radiometer 20K module or connected via external electro-formed bended
waveguides. The requirement of high stability of the reference signal imposed a
careful design for the radiometric and thermal properties of the loads.
Materials used for the manufacturing have been characterized for thermal, RF
and mechanical properties. We describe in this paper the design and the
performance of the reference system.Comment: This is an author-created, un-copyedited version of an article
accepted for publication in JINST. IOP Publishing Ltd is not responsible for
any errors or omissions in this version of the manuscript or any version
derived from it. The definitive publisher authenticated version is available
online at [10.1088/1748-0221/4/12/T12006]. 14 pages, 34 figure
Transiting Exoplanets with JWST
The era of exoplanet characterization is upon us. For a subset of exoplanets
-- the transiting planets -- physical properties can be measured, including
mass, radius, and atmosphere characteristics. Indeed, measuring the atmospheres
of a further subset of transiting planets, the hot Jupiters, is now routine
with the Spitzer Space Telescope. The James Webb Space Telescope (JWST) will
continue Spitzer's legacy with its large mirror size and precise thermal
stability. JWST is poised for the significant achievement of identifying
habitable planets around bright M through G stars--rocky planets lacking
extensive gas envelopes, with water vapor and signs of chemical disequilibrium
in their atmospheres. Favorable transiting planet systems, are, however,
anticipated to be rare and their atmosphere observations will require tens to
hundreds of hours of JWST time per planet. We review what is known about the
physical characteristics of transiting planets, summarize lessons learned from
Spitzer high-contrast exoplanet measurements, and give several examples of
potential JWST observations.Comment: 22 pages, 11 figures. In press in "Astrophysics in the Next Decade:
JWST and Concurrent Facilities, Astrophysics & Space Science Library,
Thronson, H. A., Tielens, A., Stiavelli, M., eds., Springer: Dordrecht
(2008)." The original publication will be available at
http://www.springerlink.co
- âŠ