360 research outputs found
Solidâliquid interfacial free energy of ice Ih, ice Ic, and ice 0 within a mono-atomic model of water via the capillary wave method
We apply the capillarywave method, based on measurements of fluctuations in a ribbon-like interfacial
geometry, to determine the solidâliquid interfacial free energy for both polytypes of ice I and the
recently proposed ice 0 within a mono-atomic model of water. We discuss various choices for the
molecular order parameter, which distinguishes solid from liquid, and demonstrate the influence
of this choice on the interfacial stiffness. We quantify the influence of discretisation error when
sampling the interfacial profile and the limits on accuracy imposed by the assumption of quasi onedimensional
geometry. The interfacial free energies of the two ice I polytypes are indistinguishable
to within achievable statistical error and the small ambiguity which arises from the choice of order
parameter. In the case of ice 0, we find that the large surface unit cell for low index interfaces
constrains the width of the interfacial ribbon such that the accuracy of results is reduced. Nevertheless,
we establish that the interfacial free energy of ice 0 at its melting temperature is similar to that of
ice I under the same conditions. The rationality of a coreâshell model for the nucleation of ice I
within ice 0 is questioned within the context of our results. © 2017 Author(s). All article content,
except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license
(http://creativecommons.org/licenses/by/4.0/). [http://dx.doi.org/10.1063/1.4975776
Integrated and dynamical oceanographic data management - IDOD
The goal of the IDOD project was to provide the federal government, the scientific community and other users with an up-to-date tool for collecting, managing and analysing marine scientific data.The resulting âmarine information systemâ is hosted by the Belgian Marine Data Centre (BMDC), a team within the Management Unit of the Mathematical Mode's of the North Sec (MUMM). The BMDC committed itself to keep the IDOD information system alive and evolving. A remote user interface is available online at http:/ /www.mumm.ac.be/ datacentre.The project faced all the aspects of modern scientific data management. A major challenge was to establish a fruitful dialog with the data providers. This has been done through extensive discussions in the Users committee and during bilateral meetings. The topics that have then been clarified range from the principles (in order to write down a standard common âRights and duties" agreement) to the very technical and scientific details, specific to each data set .A substantial effort has been put on the definition of guidelines for ensuring the data quality throughout their way from the field to the data centre. This has resulted, for instance, in the development of a âOn-board registration of samples" computer programme, in a check list of meta-information to document the data or in the definition of a âcommon layout" for reporting data sets to the data centre.On the technical side, the variety and complexity of the data to be stored and made available for further use lead us to elaborate a complex and robust data base scheme, after an in-depth conceptual analysis. The database itself is implemented using the ORACLE technology.In parallel, a set of dedicated analysis and visualisation tools has been developed. They help the users and the data managers to tackle the data in their space and time dimensions and also allow cross-analysis between different parameters.The primary providers of data for the information system were the various teams participating in the (first) Programme for a sustainable development of the North Sea, financed by the Belgian Federal Office for scientific, technical and cultural affairs. These data are being complemented by data from other (earlier) scientific programmes and from governmental surveys.The project has been performed by MUMM, in partnership with the SURFACES laboratory (University of Liege) and the University Centre of Statistics (University of Leuven)
Approximating multi-dimensional Hamiltonian flows by billiards
Consider a family of smooth potentials , which, in the limit
, become a singular hard-wall potential of a multi-dimensional
billiard. We define auxiliary billiard domains that asymptote, as
to the original billiard, and provide asymptotic expansion of
the smooth Hamiltonian solution in terms of these billiard approximations. The
asymptotic expansion includes error estimates in the norm and an
iteration scheme for improving this approximation. Applying this theory to
smooth potentials which limit to the multi-dimensional close to ellipsoidal
billiards, we predict when the separatrix splitting persists for various types
of potentials
Convergence of invariant densities in the small-noise limit
This paper presents a systematic numerical study of the effects of noise on
the invariant probability densities of dynamical systems with varying degrees
of hyperbolicity. It is found that the rate of convergence of invariant
densities in the small-noise limit is frequently governed by power laws. In
addition, a simple heuristic is proposed and found to correctly predict the
power law exponent in exponentially mixing systems. In systems which are not
exponentially mixing, the heuristic provides only an upper bound on the power
law exponent. As this numerical study requires the computation of invariant
densities across more than 2 decades of noise amplitudes, it also provides an
opportunity to discuss and compare standard numerical methods for computing
invariant probability densities.Comment: 27 pages, 19 figures, revised with minor correction
A maximum density rule for surfaces of quasicrystals
A rule due to Bravais of wide validity for crystals is that their surfaces
correspond to the densest planes of atoms in the bulk of the material.
Comparing a theoretical model of i-AlPdMn with experimental results, we find
that this correspondence breaks down and that surfaces parallel to the densest
planes in the bulk are not the most stable, i.e. they are not so-called bulk
terminations. The correspondence can be restored by recognizing that there is a
contribution to the surface not just from one geometrical plane but from a
layer of stacked atoms, possibly containing more than one plane. We find that
not only does the stability of high-symmetry surfaces match the density of the
corresponding layer-like bulk terminations but the exact spacings between
surface terraces and their degree of pittedness may be determined by a simple
analysis of the density of layers predicted by the bulk geometric model.Comment: 8 pages of ps-file, 3 Figs (jpg
SEOM clinical guidelines on nutrition in cancer patients (2018)
Nutritional deficiency is a common medical problem that affects 15-40% of cancer patients. It negatively impacts their quality of life and can compromise treatment completion. Oncological therapies, such as surgery, radiation therapy, and drug therapies are improving survival rates. However, all these treatments can play a role in the development of malnutrition and/or metabolic alterations in cancer patients, induced by the tumor or by its treatment. Nutritional assessment of cancer patients is necessary at the time of diagnosis and throughout treatment, so as to detect nutritional deficiencies. The Patient-Generated Subjective Global Assessment method is the most widely used tool that also evaluates nutritional requirements. In this guideline, we will review the indications of nutritional interventions as well as artificial nutrition in general and according to the type of treatment (radiotherapy, surgery, or systemic therapy), or palliative care. Likewise, pharmacological agents and pharmaconutrients will be reviewed in addition to the role of regular physical activity
How metal films de-wet substrates - identifying the kinetic pathways and energetic driving forces
We study how single-crystal chromium films of uniform thickness on W(110)
substrates are converted to arrays of three-dimensional (3D) Cr islands during
annealing. We use low-energy electron microscopy (LEEM) to directly observe a
kinetic pathway that produces trenches that expose the wetting layer. Adjacent
film steps move simultaneously uphill and downhill relative to the staircase of
atomic steps on the substrate. This step motion thickens the film regions where
steps advance. Where film steps retract, the film thins, eventually exposing
the stable wetting layer. Since our analysis shows that thick Cr films have a
lattice constant close to bulk Cr, we propose that surface and interface stress
provide a possible driving force for the observed morphological instability.
Atomistic simulations and analytic elastic models show that surface and
interface stress can cause a dependence of film energy on thickness that leads
to an instability to simultaneous thinning and thickening. We observe that
de-wetting is also initiated at bunches of substrate steps in two other
systems, Ag/W(110) and Ag/Ru(0001). We additionally describe how Cr films are
converted into patterns of unidirectional stripes as the trenches that expose
the wetting layer lengthen along the W[001] direction. Finally, we observe how
3D Cr islands form directly during film growth at elevated temperature. The Cr
mesas (wedges) form as Cr film steps advance down the staircase of substrate
steps, another example of the critical role that substrate steps play in 3D
island formation
On stochastic sea of the standard map
Consider a generic one-parameter unfolding of a homoclinic tangency of an
area preserving surface diffeomorphism. We show that for many parameters
(residual subset in an open set approaching the critical value) the
corresponding diffeomorphism has a transitive invariant set of full
Hausdorff dimension. The set is a topological limit of hyperbolic sets
and is accumulated by elliptic islands.
As an application we prove that stochastic sea of the standard map has full
Hausdorff dimension for sufficiently large topologically generic parameters.Comment: 36 pages, 5 figure
Recommended from our members
Highly efficient separation of actinides from lanthanides by a phenanthroline-derived bis-triazine ligand
The synthesis, lanthanide complexation, and solvent ex- traction of actinide(III) and lanthanide(III) radiotracers from nitric acid solutions by a phenanthroline-derived quadridentate bis-triazine ligand are described. The ligand separates Am(III) and Cm(III) from the lanthanides with remarkably high efficiency, high selectivity, and fast extraction kinetics compared to its 2,2'-bipyridine counterpart. Structures of the 1:2 bis-complexes of the ligand with Eu(III) and Yb(III) were elucidated by X-ray crystallography and force field calculations, respec-tively. The Eu(III) bis-complex is the first 1:2 bis-complex of a quadridentate bis-triazine ligand to be characterized by crystallography. The faster rates of extraction were verified by kinetics measurements using the rotating membrane cell technique in several diluents. The improved kinetics of metal ion extraction are related to the higher surface activity of the ligand at the phase interface. The improvement in the ligand's properties on replacing the bipyridine unit with a phenanthroline unit far exceeds what was anticipated based on ligand design alone
In vitro production of bovine embryos derived from individual donors in the CorralÂź dish
Background: Since the identity of the embryo is of outmost importance during commercial in vitro embryo production, bovine oocytes and embryos have to be cultured strictly per donor. Due to the rather low yield of oocytes collected after ovum pick-up (OPU) per individual cow, oocyte maturation and embryo culture take place in small groups, which is often associated with inferior embryo development. The objective of this study was to improve embryonic development in small donor groups by using the Corral (R) dish. This commercial dish is designed for human embryo production. It contains two central wells that are divided into quadrants by a semi-permeable wall. In human embryo culture, one embryo is placed per quadrant, allowing individual follow-up while embryos are exposed to a common medium. In our study, small groups of oocytes and subsequently embryos of different bovine donors were placed in the Corral (R) dish, each donor group in a separate quadrant.
Results: In two experiments, the Corral (R) dish was evaluated during in vitro maturation (IVM) and/or in vitro culture (IVC) by grouping oocytes and embryos of individual bovine donors per quadrant. At day 7, a significantly higher blastocyst rate was noted in the Corral (R) dish used during IVM and IVC than when only used during IVM (12.9% +/- 2.10 versus 22.8% +/- 2.67) (P < 0.05). However, no significant differences in blastocyst yield were observed anymore between treatment groups at day 8 post insemination.
Conclusions: In the present study, the Corral (R) dish was used for in vitro embryo production (IVP) in cattle; allowing to allocate oocytes and/or embryos per donor. As fresh embryo transfers on day 7 have higher pregnancy outcomes, the Corral (R) dish offers an added value for commercial OPU/IVP, since a higher blastocyst development at day 7 is obtained when the Corral (R) dish is used during IVM and IVC
- âŠ