149 research outputs found
Two-dimensional structure of mountain wave observed by aircraft during the PYREX experiment
Diagnosing the transition layer at extratropical latitudes using MLS O-3 and MOPITT CO analyses
Characterization of microbulk detectors in argon- and neon-based mixtures
A recent Micromegas manufacturing technique, so called Microbulk, has been
developed, improving the uniformity and stability of this kind of detectors.
Excellent energy resolutions have been obtained, reaching values as low as 11%
FWHM at 5.9 keV in Ar+5%iC4H10. This detector has other advantages like its
flexible structure, low material budget and high radio-purity. Two microbulk
detectors with gaps of 50 and 25 um have been characterized in argon- and
neon-based mixtures with ethane, isobutane and cyclohexane. The results will be
presented and discussed. The gain curves have been fitted to the Rose-Korff
gain model and dependences of the electron mean free path and the threshold
energy for ionization have been obtained. The possible relation between these
two parameters and the energy resolution will be also discussed.Comment: Submitted to the Journal of Instrumentatio
Simultaneous observations of the quasar 3C 273 with INTEGRAL, XMM-Newton and RXTE
INTEGRAL has observed the bright quasar 3C 273 on 3 epochs in January 2003 as
one of the first observations of the open programme. The observation on January
5 was simultaneous with RXTE and XMM-Newton observations. We present here a
first analysis of the continuum emission as observed by these 3 satellites in
the band from 3 keV to 500 keV. The continuum spectral energy distribution of
3C 273 was observed to be weak and steep in the high energies during this
campaign. We present the actual status of the cross calibrations between the
instruments on the three platforms using the calibrations available in June
2003.Comment: 4 figures, accepted for publication in A+A letter
Supercooled liquid water cloud observed, analysed, and modelled at the top of the planetary boundary layer above Dome C, Antarctica
Abstract. A comprehensive analysis of the water budget over the Dome C (Concordia,
Antarctica) station has been performed during the austral summer 2018–2019
as part of the Year of Polar Prediction (YOPP) international campaign. Thin
(∼100 m deep) supercooled liquid water (SLW) clouds have been
detected and analysed using remotely sensed observations at the station
(tropospheric depolarization lidar, the H2O Antarctica Microwave Stratospheric and Tropospheric
Radiometer (HAMSTRAD), net
surface radiation from the Baseline Surface Radiation Network (BSRN)), radiosondes, and satellite observations (CALIOP, Cloud-Aerosol LIdar with Orthogonal Polarization/CALIPSO, Cloud Aerosol Lidar and Infrared
Pathfinder Satellite Observations) combined with a specific
configuration of the numerical weather prediction model: ARPEGE-SH (Action
de Recherche Petite Echelle Grande Echelle – Southern Hemisphere). The
analysis shows that SLW clouds were present from November to March, with the
greatest frequency occurring in December and January when ∼50 % of the days in summer time exhibited SLW clouds for at least 1 h. Two case studies are used to illustrate this phenomenon. On 24 December 2018, the atmospheric planetary boundary layer (PBL) evolved
following a typical diurnal variation, which is to say with a warm and dry
mixing layer at local noon thicker than the cold and dry stable layer at
local midnight. Our study showed that the SLW clouds were observed at Dome C
within the entrainment and the capping inversion zones at the top of the
PBL. ARPEGE-SH was not able to correctly estimate the ratio between liquid
and solid water inside the clouds with the liquid water path (LWP) strongly
underestimated by a factor of 1000 compared to observations. The lack of
simulated SLW in the model impacted the net surface radiation that was 20–30 W m−2 higher in the BSRN observations than in the ARPEGE-SH
calculations, mainly attributable to the BSRN longwave downward surface
radiation being 50 W m−2 greater than that of ARPEGE-SH. The second
case study took place on 20 December 2018, when a warm and wet episode
impacted the PBL with no clear diurnal cycle of the PBL top. SLW cloud
appearance within the entrainment and capping inversion zones coincided with
the warm and wet event. The amount of liquid water measured by HAMSTRAD was
∼20 times greater in this perturbed PBL than in the typical
PBL. Since ARPEGE-SH was not able to accurately reproduce these SLW clouds,
the discrepancy between the observed and calculated net surface radiation
was even greater than in the typical PBL case, reaching +50 W m−2,
mainly attributable to the downwelling longwave surface radiation from BSRN
being 100 W m−2 greater than that of ARPEGE-SH. The model was then run
with a new partition function favouring liquid water for temperatures below
−20 down to −40 ∘C. In this test mode, ARPEGE-SH has
been able to generate SLW clouds with modelled LWP and net surface radiation
consistent with observations during the typical case, whereas, during the
perturbed case, the modelled LWP was 10 times less than the observations and
the modelled net surface radiation remained lower than the observations by
∼50 W m−2. Accurately modelling the presence of SLW
clouds appears crucial to correctly simulate the surface energy budget over
the Antarctic Plateau
Midlatitude stratosphere - troposphere exchange as diagnosed by MLS O3 and MOPITT CO assimilated fields
International audienceThis paper presents a comprehensive characterization of a very deep stratospheric intrusion which occurred over the British Isles on 15 August 2007. The signature of this event is diagnosed using ozonesonde measurements over Lerwick, UK (60.14 N, 1.19 W) and is also well characterized using meteorological analyses from the global operational weather prediction model of Météo-France, ARPEGE. Modelled as well as assimilated fields of both ozone (O3) and carbon monoxide (CO) have been used in order to better document this event. O3 and CO from Aura/MLS and Terra/MOPITT instruments, respectively, are assimilated into the three-dimensional chemical transport model MOCAGE of Météo-France using a variational 3-DFGAT (First Guess at Appropriate Time) method. The validation of O3 and CO assimilated fields is done using selfconsistency diagnostics and by comparison with independent observations such as MOZAIC (O3 and CO), AIRS (CO) and OMI (O3). It particularly shows in the upper troposphere and lower stratosphere region that the assimilated fields are closer to MOZAIC than the free model run. The O3 bias between MOZAIC and the analyses is −11.5 ppbv with a RMS of 22.4 ppbv and a correlation coefficient of 0.93, whereas between MOZAIC and the free model run, the corresponding values are 33 ppbv, 38.5 ppbv and 0.83, respectively. In the same way, for CO, the bias, RMS and correlation coefficient between MOZAIC and the analyses are −3.16 ppbv, 13 ppbv and 0.79, respectively, whereas between MOZAIC and the free model run, the corresponding values are 33 ppbv, 38.5 ppbv and 0.83, respectively. In the same way, for CO, the bias, RMS and correlation coefficient between MOZAIC and the analyses are −3.16 ppbv, 13 ppbv and 0.79, respectively, whereas between MOZAIC and the free model they are 6.3 ppbv, 16.6 ppbv and 0.71, respectively. The paper also presents a demonstration of the capability of O3 and CO assimilated fields to better describe a stratosphere-troposphere exchange (STE) event in comparison with the free run modelled O3 and CO fields. Although the assimilation of MLS data improves the distribution of O3 above the tropopause compared to the free model run, it is not sufficient to reproduce the STE event well. Assimilated MOPITT CO allows a better qualitative description of the stratospheric intrusion event. The MOPITT CO analyses appear more promising than the MLS O3 analyses in terms of their ability to capture a deep STE event. Therefore, the results of this study open the perspectives for using MOPITT CO in the STE studies
The INTEGRAL spectrometer SPI: performance of point-source data analysis
The performance of the SPI point-source data analysis system is assessed using a combination of simulations and of observations gathered during the first year of INTEGRAL operations. External error estimates are derived by comparing source positions and fluxes obtained from independent analyses. When the source detection significance provided by the spiros imaging reconstruction program increases from ∼10 to ∼100, the errors decrease as the inverse of the detection significance, with values from ∼10 to ∼1 arcmin in positions, and from ∼10 to ∼1 per cent in relative flux. These errors are dominated by Poisson counting noise. Our error estimates are consistent with those provided by the spiros program. With higher detection significance, the accuracy is ultimately limited to ∼0.5 arcmin in position and ∼1 per cent in relative flux by other types of errors. In these cases, spiros underestimates the true errors as it only takes into account the Poisson counting noise. At the low signal-to-noise ratio end, spiros is also too optimistic, and the number of spurious detections is significantly higher than would be expected from statistical noise fluctuations only. The analysis results do not depend significantly on the target off-axis angle, or on the number of pointings considered, provided that this number is larger than ∼15. Realistic source confusion tests are carried out by adding simulated data to the observation of the Crab nebula and pulsar. Reliable flux values can be obtained for sources separated by angles as small as 0.5 deg if their positions are known and kept fixed in the data deconvolution process. However, when spiros is searching for best source positions, if two sources are separated by less than ∼2 deg, it may only find a single spurious source located between the real ones (with a flux equal to the sum of the fluxes). Finally, users of the spiros program can find a number of important recommendations in the conclusio
Micromegas detector developments for MIMAC
The aim of the MIMAC project is to detect non-baryonic Dark Matter with a
directional TPC. The recent Micromegas efforts towards building a large size
detector will be described, in particular the characterization measurements of
a prototype detector of 10 10 cm with a 2 dimensional readout
plane. Track reconstruction with alpha particles will be shown.Comment: 8 pages, 7 figures Proceedings of the 3rd International conference on
Directional Detection of Dark Matter (CYGNUS 2011), Aussois, France, 8-10
June 2011; corrections on author affiliation
Towards smaller gap microbulks
Small gap Micromegas detectors (< 50µm) are expected to be optimal for high pres- sure applications. Combining the microbulk manufacturing technique with a small gap can result in attractive detectors for rare event detection, in particular double beta decay or dark matter searches. We present novel results obtained with small gap microbulks (25 and 12.5µm) that have been manufactured recently. For the first time for this type of detectors, we show experimentally that for each amplification gap there is an optimal pressure and that smaller gaps are more suitable for higher pressures
- …