102 research outputs found
Implementation of sub-nanosecond time-to-digital convertor in field-programmable gate array: applications to time-of-flight analysis in muon radiography
International audienceTime-of-flight (tof) techniques are standard techniques in high energy physics to determine particles propagation directions. Since particles velocities are generally close to c, the speed of light, and detectors typical dimensions at the meter level, the state-of-the-art tof techniques should reach sub-nanosecond timing resolution. Among the various techniques already available, the recently developed ring oscillator TDC ones, implemented in low cost FPGA, feature a very interesting figure of merit since a very good timing performance may be achieved with limited processing ressources. This issue is relevant for applications where unmanned sensors should have the lowest possible power consumption. Actually this article describes in details the application of this kind of tof technique to muon tomography of geological bodies. Muon tomography aims at measuring density variations and absolute densities through the detection of atmospheric muons flux's attenuation, due to the presence of matter. When the measured fluxes become very low, an identified source of noise comes from backwards propagating particles hitting the detector in a direction pointing to the geological body. The separation between through-going and backward-going particles, on the basis of the tof information is therefore a key parameter for the tomography analysis and subsequent previsions
Construction and commissioning of a technological prototype of a high-granularity semi-digital hadronic calorimeter
A large prototype of 1.3m3 was designed and built as a demonstrator of the
semi-digital hadronic calorimeter (SDHCAL) concept proposed for the future ILC
experiments. The prototype is a sampling hadronic calorimeter of 48 units. Each
unit is built of an active layer made of 1m2 Glass Resistive Plate
Chamber(GRPC) detector placed inside a cassette whose walls are made of
stainless steel. The cassette contains also the electronics used to read out
the GRPC detector. The lateral granularity of the active layer is provided by
the electronics pick-up pads of 1cm2 each. The cassettes are inserted into a
self-supporting mechanical structure built also of stainless steel plates
which, with the cassettes walls, play the role of the absorber. The prototype
was designed to be very compact and important efforts were made to minimize the
number of services cables to optimize the efficiency of the Particle Flow
Algorithm techniques to be used in the future ILC experiments. The different
components of the SDHCAL prototype were studied individually and strict
criteria were applied for the final selection of these components. Basic
calibration procedures were performed after the prototype assembling. The
prototype is the first of a series of new-generation detectors equipped with a
power-pulsing mode intended to reduce the power consumption of this highly
granular detector. A dedicated acquisition system was developed to deal with
the output of more than 440000 electronics channels in both trigger and
triggerless modes. After its completion in 2011, the prototype was commissioned
using cosmic rays and particles beams at CERN.Comment: 49 pages, 41 figure
Pion and proton showers in the CALICE scintillator-steel analogue hadron calorimeter
Showers produced by positive hadrons in the highly granular CALICE
scintillator-steel analogue hadron calorimeter were studied. The experimental
data were collected at CERN and FNAL for single particles with initial momenta
from 10 to 80 GeV/c. The calorimeter response and resolution and spatial
characteristics of shower development for proton- and pion-induced showers for
test beam data and simulations using Geant4 version 9.6 are compared.Comment: 26 pages, 16 figures, JINST style, changes in the author list, typos
corrected, new section added, figures regrouped. Accepted for publication in
JINS
Performance of the first prototype of the CALICE scintillator strip electromagnetic calorimeter
A first prototype of a scintillator strip-based electromagnetic calorimeter
was built, consisting of 26 layers of tungsten absorber plates interleaved with
planes of 45x10x3 mm3 plastic scintillator strips. Data were collected using a
positron test beam at DESY with momenta between 1 and 6 GeV/c. The prototype's
performance is presented in terms of the linearity and resolution of the energy
measurement. These results represent an important milestone in the development
of highly granular calorimeters using scintillator strip technology. This
technology is being developed for a future linear collider experiment, aiming
at the precise measurement of jet energies using particle flow techniques
The Time Structure of Hadronic Showers in highly granular Calorimeters with Tungsten and Steel Absorbers
The intrinsic time structure of hadronic showers influences the timing
capability and the required integration time of hadronic calorimeters in
particle physics experiments, and depends on the active medium and on the
absorber of the calorimeter. With the CALICE T3B experiment, a setup of 15
small plastic scintillator tiles read out with Silicon Photomultipliers, the
time structure of showers is measured on a statistical basis with high spatial
and temporal resolution in sampling calorimeters with tungsten and steel
absorbers. The results are compared to GEANT4 (version 9.4 patch 03)
simulations with different hadronic physics models. These comparisons
demonstrate the importance of using high precision treatment of low-energy
neutrons for tungsten absorbers, while an overall good agreement between data
and simulations for all considered models is observed for steel.Comment: 24 pages including author list, 9 figures, published in JINS
Hadron shower decomposition in the highly granular CALICE analogue hadron calorimeter
The spatial development of hadronic showers in the CALICE scintillator-steel
analogue hadron calorimeter is studied using test beam data collected at CERN
and FNAL for single positive pions and protons with initial momenta in the
range from 10 to 80 GeV/c. Both longitudinal and radial development of hadron
showers are parametrised with two-component functions. The parametrisation is
fit to test beam data and simulations using the QGSP_BERT and FTFP_BERT physics
lists from Geant4 version 9.6. The parameters extracted from data and simulated
samples are compared for the two types of hadrons. The response to pions and
the ratio of the non-electromagnetic to the electromagnetic calorimeter
response, h/e, are estimated using the extrapolation and decomposition of the
longitudinal profiles.Comment: 38 pages, 19 figures, 5 tables; author list changed; submitted to
JINS
First demonstration of 30 eVee ionization energy resolution with Ricochet germanium cryogenic bolometers
The future Ricochet experiment aims to search for new physics in the
electroweak sector by measuring the Coherent Elastic Neutrino-Nucleus
Scattering process from reactor antineutrinos with high precision down to the
sub-100 eV nuclear recoil energy range. While the Ricochet collaboration is
currently building the experimental setup at the reactor site, it is also
finalizing the cryogenic detector arrays that will be integrated into the
cryostat at the Institut Laue Langevin in early 2024. In this paper, we report
on recent progress from the Ge cryogenic detector technology, called the
CryoCube. More specifically, we present the first demonstration of a 30~eVee
(electron equivalent) baseline ionization resolution (RMS) achieved with an
early design of the detector assembly and its dedicated High Electron Mobility
Transistor (HEMT) based front-end electronics. This represents an order of
magnitude improvement over the best ionization resolutions obtained on similar
heat-and-ionization germanium cryogenic detectors from the EDELWEISS and
SuperCDMS dark matter experiments, and a factor of three improvement compared
to the first fully-cryogenic HEMT-based preamplifier coupled to a CDMS-II
germanium detector. Additionally, we discuss the implications of these results
in the context of the future Ricochet experiment and its expected background
mitigation performance.Comment: 10 pages, 5 figures, 1 tabl
Fast neutron background characterization of the future Ricochet experiment at the ILL research nuclear reactor
The future Ricochet experiment aims at searching for new physics in the
electroweak sector by providing a high precision measurement of the Coherent
Elastic Neutrino-Nucleus Scattering (CENNS) process down to the sub-100 eV
nuclear recoil energy range. The experiment will deploy a kg-scale
low-energy-threshold detector array combining Ge and Zn target crystals 8.8
meters away from the 58 MW research nuclear reactor core of the Institut Laue
Langevin (ILL) in Grenoble, France. Currently, the Ricochet collaboration is
characterizing the backgrounds at its future experimental site in order to
optimize the experiment's shielding design. The most threatening background
component, which cannot be actively rejected by particle identification,
consists of keV-scale neutron-induced nuclear recoils. These initial fast
neutrons are generated by the reactor core and surrounding experiments
(reactogenics), and by the cosmic rays producing primary neutrons and
muon-induced neutrons in the surrounding materials. In this paper, we present
the Ricochet neutron background characterization using He proportional
counters which exhibit a high sensitivity to thermal, epithermal and fast
neutrons. We compare these measurements to the Ricochet Geant4 simulations to
validate our reactogenic and cosmogenic neutron background estimations.
Eventually, we present our estimated neutron background for the future Ricochet
experiment and the resulting CENNS detection significance.Comment: 14 pages, 14 figures, 1 tabl
- …