An overview of trade opportunities in China's pork chain

Onderzoek naar de toekomstige mogelijkheden voor varkensvlees op de Chinese mark

Minimum-dissipation model for large-eddy simulation using symmetry-preserving discretization in OpenFOAM

The minimum-dissipation model is applied to channel flow up to $Re_\tau = 2000$, flow past a circular cylinder at $Re=3900$, and flow over periodic hills at $Re=10595$. Numerical simulations were performed in OpenFOAM which is based on the finite volume methods. We used both symmetry-preserving and standard second-order accurate discretization methods in OpenFOAM on structured meshes. The results are compared to DNS and experimental data. The results of channel flow demonstrate a static QR model performs equally well as the dynamic models while reducing the computational cost. The model constant of $C=0.024$ gives the most accurate prediction, and the contribution of the sub-grid model decreases with the increase of the mesh resolution and becomes very small (less than 0.2 molecular viscosity) if a fine mesh is used. Furthermore, the QR model is able to predict the mean and rms velocity accurately up to $Re_\tau = 2000$ without a wall damping function. The symmetry-preserving discretization outperforms the standard OpenFOAM discretization at $Re_\tau=1000$. The results for the flow over a cylinder show that the mean velocity, drag coefficient, and lift coefficient are in good agreement with the experimental data and the central difference schemes conjugated with the QR model predict better results. The various comparisons carried out for flows over periodic hills demonstrate the need to use central difference schemes in OpenFOAM in combination with the minimum dissipation model. The best model constant is again $C=0.024$. The single wind turbine simulation shows that the QR model is capable of predicting accurate results in complex rotating scenarios.Comment: 6 pages; 12 figures; ETMM14 conference paper. arXiv admin note: substantial text overlap with arXiv:2309.0441

Predictors and outcomes of sustained, intermittent or never achieving remission in patients with recent onset inflammatory polyarthritis:Results from the Norfolk Arthritis Register

Objectives: Early remission is the current treatment strategy for patients with inflammatory polyarthritis (IP) and RA. Our objective was to identify baseline factors associated with achieving remission: sustained (SR), intermittent (IR) or never (NR) over a 5-year period in patients with early IP.  Methods: Clinical and demographic data of patients with IP recruited to the Norfolk Arthritis Register (NOAR) were obtained at baseline and years 1, 2, 3 and 5. Remission was defined as no tender or swollen joints (out of 51). Patients were classified as NR or PR, respectively, if they were in remission at: no assessment or ⩾3 consecutive assessments after baseline, and IR otherwise. Ordinal regression and a random effects model, respectively, were used to examine the association between baseline factors, remission group and HAQ scores over time.  Results: A total of 868 patients (66% female) were included. Of these, 54%, 34% and 12% achieved NR, IR and SR, respectively. In multivariate analysis, female sex (odds ratio, OR 0.47, 95% CI: 0.35, 0.63), higher tender joint count (OR = 0.94, 95% CI: 0.93, 0.96), higher HAQ (OR = 0.59, 95% CI: 0.48, 0.74), being obese (OR = 0.70, 95% CI: 0.50, 0.99), hypertensive (OR = 0.67, 95% CI: 0.50, 0.90) or depressed (OR = 0.74, 95% CI: 0.55, 1.00) at baseline were independent predictors of being in a lower remission group. IR and SR were associated with lower HAQ scores over time and lower DAS28 at year 5.  Conclusion: Women with higher tender joint count and disability at baseline, depression, obesity and hypertension were less likely to achieve remission. This information could help when stratifying patients for more aggressive therapy

Three-dimensional flow instability in a lid-driven isosceles triangular cavity

Linear three-dimensional modal instability of steady laminar two-dimensional states developing in a lid-driven cavity of isosceles triangular cross-section is investigated theoretically and experimentally for the case in which the equal sides form a rectangular corner. An asymmetric steady two-dimensional motion is driven by the steady motion of one of the equal sides. If the side moves away from the rectangular corner, a stationary three-dimensional instability is found. If the motion is directed towards the corner, the instability is oscillatory. The respective critical Reynolds numbers are identified both theoretically and experimentally. The neutral curves pertinent to the two configurations and the properties of the respective leading eigenmodes are documented and analogies to instabilities in rectangular lid-driven cavities are discussed

HERschel Observations of Edge-on Spirals (HEROES). II: Tilted-ring modelling of the atomic gas disks

Context. Edge-on galaxies can offer important insights in galaxy evolution as they are the only systems where the distribution of the different components can be studied both radially and vertically. The HEROES project was designed to investigate the interplay between the gas, dust, stars and dark matter (DM) in a sample of 7 massive edge-on spiral galaxies. Aims. In this second HEROES paper we present an analysis of the atomic gas content of 6 out of 7 galaxies in our sample. The remaining galaxy was recently analysed according to the same strategy. The primary aim of this work is to constrain the surface density distribution, the rotation curve and the geometry of the gas disks in a homogeneous way. In addition we identify peculiar features and signs of recent interactions. Methods. We construct detailed tilted-ring models of the atomic gas disks based on new GMRT 21-cm observations of NGC 973 and UGC 4277 and re-reduced archival HI data of NGC 5907, NGC 5529, IC 2531 and NGC 4217. Potential degeneracies between different models are resolved by requiring a good agreement with the data in various representations of the data cubes. Results. From our modelling we find that all but one galaxy are warped along the major axis. In addition, we identify warps along the line of sight in three galaxies. A flaring gas layer is required to reproduce the data only for one galaxy, but (moderate) flares cannot be ruled for the other galaxies either. A coplanar ring-like structure is detected outside the main disk of NGC 4217, which we suggest could be the remnant of a recent minor merger event. We also find evidence for a radial inflow of 15 +- 5 km/s in the disk of NGC 5529, which might be related to the ongoing interaction with two nearby companions. (Abridged)Comment: 39 pages, 38 figures, Accepted for publication in Astronomy & Astrophysic

Cloning and characterisation of a maize carotenoid cleavage dioxygenase (ZmCCD1) and its involvement in the biosynthesis of apocarotenoids with various roles in mutualistic and parasitic interactions

Colonisation of maize roots by arbuscular mycorrhizal (AM) fungi leads to the accumulation of apocarotenoids (cyclohexenone and mycorradicin derivatives). Other root apocarotenoids (strigolactones) are involved in signalling during early steps of the AM symbiosis but also in stimulation of germination of parasitic plant seeds. Both apocarotenoid classes are predicted to originate from cleavage of a carotenoid substrate by a carotenoid cleavage dioxygenase (CCD), but the precursors and cleavage enzymes are unknown. A Zea mays CCD (ZmCCD1) was cloned by RT-PCR and characterised by expression in carotenoid accumulating E. coli strains and analysis of cleavage products using GC¿MS. ZmCCD1 efficiently cleaves carotenoids at the 9, 10 position and displays 78% amino acid identity to Arabidopsis thaliana CCD1 having similar properties. ZmCCD1 transcript levels were shown to be elevated upon root colonisation by AM fungi. Mycorrhization led to a decrease in seed germination of the parasitic plant Striga hermonthica as examined in a bioassay. ZmCCD1 is proposed to be involved in cyclohexenone and mycorradicin formation in mycorrhizal maize roots but not in strigolactone formatio