Binder evaporation during powder sheet Additive Manufacturing

Several Additive Manufacturing methods are well established and found access into regular production in multiple sectors. For processing metals, typically wire or powder is used as feedstock. Wire processing is typically used for comparably large structure building, while powder processes offer, in general, a more precise metal application. For Powder Bed Fusion processes, very fine powder is used (typical 20 µm to 65 µm), while for Directed Energy Deposition powders are in the range between 50 µm and 160 µm. Such fine powders can be a health risk for humans (aspiration, skin integration). Avoiding contact with the powders in a production environment can be a big effort or not avoidable. Therefore, an alternative process was developed that provides the powder not as free powder particles but in form of powder sheets. For enabling the necessary bonding between the particles, a binder is used. In order to understand the impact of the binder during laser processing of the powder sheets, single pulse and line treatments were produced and recorded with high-speed imaging. Recordings show the vaporization of the binder and the related ejections of powder particles. At lower energy input, the binder evaporation led to less spattering, which indicates that a binder heating at low heating rates induces less pressure on the powder particles.Mechanical Engineerin

Mitsui-7, heat-treated, and nitrogen-doped multi-walled carbon nanotubes elicit genotoxicity in human lung epithelial cells

Background: The unique physicochemical properties of multi-walled carbon nanotubes (MWCNT) have led to many industrial applications. Due to their low density and small size, MWCNT are easily aerosolized in the workplace making respiratory exposures likely in workers. The International Agency for Research on Cancer designated the pristine Mitsui-7 MWCNT (MWCNT-7) as a Group 2B carcinogen, but there was insufficient data to classify all other MWCNT. Previously, MWCNT exposed to high temperature (MWCNT-HT) or synthesized with nitrogen (MWCNT-ND) have been found to elicit attenuated toxicity; however, their genotoxic and carcinogenic potential are not known. Our aim was to measure the genotoxicity of MWCNT-7 compared to these two physicochemically-altered MWCNTs in human lung epithelial cells (BEAS-2B & SAEC). Results: Dose-dependent partitioning of individual nanotubes in the cell nuclei was observed for each MWCNT material and was greatest for MWCNT-7. Exposure to each MWCNT led to significantly increased mitotic aberrations with multi- and monopolar spindle morphologies and fragmented centrosomes. Quantitative analysis of the spindle pole demonstrated significantly increased centrosome fragmentation from 0.024–2.4 μg/mL of each MWCNT. Significant aneuploidy was measured in a dose-response from each MWCNT-7, HT, and ND; the highest dose of 24 μg/mL produced 67, 61, and 55%, respectively. Chromosome analysis demonstrated significantly increased centromere fragmentation and translocations from each MWCNT at each dose. Following 24 h of exposure to MWCNT-7, ND and/or HT in BEAS-2B a significant arrest in the G1/S phase in the cell cycle occurred, whereas the MWCNT-ND also induced a G2 arrest. Primary SAEC exposed for 24 h to each MWCNT elicited a significantly greater arrest in the G1 and G2 phases. However, SAEC arrested in the G1/S phase after 72 h of exposure. Lastly, a significant increase in clonal growth was observed one month after exposure to 0.024 μg/mL MWCNT-HT & ND. Conclusions: Although MWCNT-HT & ND cause a lower incidence of genotoxicity, all three MWCNTs cause the same type of mitotic and chromosomal disruptions. Chromosomal fragmentation and translocations have not been observed with other nanomaterials. Because in vitro genotoxicity is correlated with in vivo genotoxic response, these studies in primary human lung cells may predict the genotoxic potency in exposed human populations

Evaluation of Methods for the Analysis of Untreated and Processed Lignocellulosic Biomasses

The overall efficiency of the transformation of lignocellulosic materials to usable products as chemicals and fuels must be governed by adequate analysis of products before and after treatments. Using some promising technologies, lignocelluloses which are biomasses from marine plant and trees, grains, food and non-food crops, and woodbased can give products as fuel alcohol and other chemicals. Various methods of transformation from feedstock to valuable end products are discussed in the scientific literature. Therefore, yields must justify methods used for biomass transformations. As a result, adequate compositional analysis of these processing stages is needed. In this chapter, standard common methods such as gravimetric, chromatography, spectroscopic and their variations for analysis on both untreated and treated lignocelluloses are highlighted. The ease of the use and challenges with recommendations to their applicability to quantifying lignocelluloses fractionations for reproducibility and to be representative are discussed. With biomass technology, virtually all and even more products that can be produced from fossil energy can also be produced from biomass energy. Adequate analysis is therefore necessary

Review on catalytic cleavage of C-C inter-unit linkages in lignin model compounds: Towards lignin depolymerisation

Lignin depolymerisation has received considerable attention recently due to the pressing need to find sustainable alternatives to fossil fuel feedstock to produce chemicals and fuels. Two types of interunit linkages (C–C and C–O linkages) link several aromatic units in the structure of lignin. Between these two inter-unit linkages, the bond energies of C–C linkages are higher than that of C–O linkages, making them harder to break. However, for an efficient lignin depolymerisation, both types of inter-unit linkages have to be broken. This is more relevant because of the fact that many delignification processes tend to result in the formation of additional C–C inter-unit bonds. Here we review the strategies reported for the cleavage of C–C inter-unit linkages in lignin model compounds and lignin. Although a number of articles are available on the cleavage of C–O inter-unit linkages, reports on the selective cleavage of C–C inter-unit linkages are relatively less. Oxidative cleavage, hydrogenolysis, two-step redox-neutral process, microwave assisted cleavage, biocatalytic and photocatalytic methods have been reported for the breaking of C–C inter-unit linkages in lignin. Here we review all these methods in detail, focused only on the breaking of C–C linkages. The objective of this review is to motivate researchers to design new strategies to break this strong C–C inter-unit bonds to valorise lignins, technical lignins in particular

Thyroid Hormone T3 Counteracts STZ Induced Diabetes in Mouse

This study intended to demonstrate that the thyroid hormone T3 counteracts the onset of a Streptozotocin (STZ) induced diabetes in wild type mice. To test our hypothesis diabetes has been induced in Balb/c male mice by multiple low dose Streptozotocin injection; and a group of mice was contemporaneously injected with T3. After 48 h mice were tested for glucose tolerance test, insulin serum levels and then sacrified. Whole pancreata were utilized for morphological and biochemical analyses, while protein extracts and RNA were utilized for expression analyses of specific molecules. The results showed that islets from T3 treated mice were comparable to age- and sex-matched control, untreated mice in number, shape, dimension, consistency, ultrastructure, insulin and glucagon levels, Tunel positivity and caspases activation, while all the cited parameters and molecules were altered by STZ alone. The T3-induced pro survival effect was associated with a strong increase in phosphorylated Akt. Moreover, T3 administration prevented the STZ-dependent alterations in glucose blood level, both during fasting and after glucose challenge, as well as in insulin serum level. In conclusion we demonstrated that T3 could act as a protective factor against STZ induced diabetes

Determination of hydroxyl groups in biorefinery resources via quantitative 31P NMR spectroscopy

The analysis of chemical structural characteristics of biorefinery product streams (such as lignin and tannin) has advanced substantially over the past decade, with traditional wet-chemical techniques being replaced or supplemented by NMR methodologies. Quantitative 31P NMR spectroscopy is a promising technique for the analysis of hydroxyl groups because of its unique characterization capability and broad potential applicability across the biorefinery research community. This protocol describes procedures for (i) the preparation/solubilization of lignin and tannin, (ii) the phosphitylation of their hydroxyl groups, (iii) NMR acquisition details, and (iv) the ensuing data analyses and means to precisely calculate the content of the different types of hydroxyl groups. Compared with traditional wet-chemical techniques, the technique of quantitative 31P NMR spectroscopy offers unique advantages in measuring hydroxyl groups in a single spectrum with high signal resolution. The method provides complete quantitative information about the hydroxyl groups with small amounts of sample (~30 mg) within a relatively short experimental time (~30-120 min)

Applications of lignin in the agri-food industry

Of late, valorization of agri-food industrial by-products and their sustainable utilization is gaining much contemplation world-over. Globally, 'Zero Waste Concept' is promoted with main emphasis laid towards generation of minimal wastes and maximal utilization of plantbased agri-food raw materials. One of the wastes/by-products in the agri-food industry are the lignin, which occurs as lignocellulosic biomass. This biomass is deliberated to be an environmental pollutant as they offer resistance to natural biodegradation. Safe disposal of this biomass is often considered a major challenge, especially in low-income countries. Hence, the application of modern technologies to effectively reduce these types of wastes and maximize their potential use/applications is vital in the present day scenario. Nevertheless, in some of the high-income countries, attempts have been made to efficiently utilize lignin as a source of fuel, as a raw material in the paper industry, as a filler material in biopolymer based packaging and for producing bioethanol. However, as of today, agri-food industrial applications remains significantly underexplored. Chemically, lignin is heterogeneous, bio-polymeric, polyphenolic compound, which is present naturally in plants, providing mechanical strength and rigidity. Reports are available wherein purified lignin is established to possess therapeutic values; and are rich in antioxidant, anti-microbial, anti-carcinogenic, antidiabetic properties, etc. This chapter is divided into four sub-categories focusing on various technological aspects related to isolation and characterization of lignin; established uses of lignin; proved bioactivities and therapeutic potentials of lignin, and finally on identifying the existing research gaps followed by future recommendations for potential use from agri-food industrial wastes.Theme of this chapter is based on our ongoing project- Valortech, which has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No 810630