A 'cyanoacrylate case' for developing fingerprints in cars

A portable case has been developed by which cyanoacrylate (super glue) fuming can be used inside a vehicle suspected of being involved in serious crime. The car itself serves as a fumigation chamber and the cyanoacrylate vapours are fed into the car via a hose. Connected to the hose and suspended inside the car is a vapour diffuser. The cyanoacrylate originates from a portable case where there is a sealed heater and also a command panel with hygrometer and thermometer for a technician to control the process. There is also space inside the case for other necessary equipment

Bridged graphite oxide materials

Bridged graphite oxide material comprising graphite sheets bridged by at least one diamine bridging group. The bridged graphite oxide material may be incorporated in polymer composites or used in adsorption media

Deep-water macroalgae from the Canary Islands: new records and biogeographical relationships

Due to the geographical location and paleobiogeography of the Canary Islands, the seaweed flora contains macroalgae with different distributional patterns. In this contribution, the biogeographical relations of several new records of deep-water macroalgae recently collected around the Canarian archipelago are discussed. These are Bryopsidella neglecta (Berthotd) Rietema,Discosporangium mesarthrocarpum (Meneghini) Hauck, Hincksia onslowensis (Amsler et Kapraun)P.C. Silva, Syringoderma floridana Henry, Peyssonnelia harveyana J. Agardh, Cryptonemia seminervis(C. Agardh) J. Agardh, Botryodadia wynnei Ballantine, Gloiocladia blomquistii (Searles) R. E.Norris, PIahchrysis peltata (W. R. Taylor) P. Huv4 et H. Huv4, Leptofauchea brasiliensis Joly, and Sarcodiotheca divaricata W. R. Taylor. These new records, especially those in the Florideophyceae,support the strong affinity of the Canary Islands seaweed flora with the warm-temperate Mediterranean-Atlantic region. Some species are recorded for the first time from the east coast of the Atlantic Ocean, enhancing the biogeographic relations of the Canarian marine flora with that of the western Atlantic regions

Interaction of paraffin wax gels with ethylene/vinyl acetate copolymers

The commercial grades of ethylene/vinyl acetate (EVA) co-polymers have found application as pour point" depressants in refined fuels. This study focuses on their behavior as additives to crude oils, where the intent is to reduce the yield stress of the gels that can form when the oil exits the reservoir. The model crude oils consisted of 4 wt % wax in decane. At EVA dosage levels of similar to200 ppm, the reduction in yield stress is 3 orders of magnitude for the C-36 wax, whereas the reduction is 1 order of magnitude for C-32 and only 3-fold for the C-28 wax. This decrease in efficiency with decreasing wax carbon number indicates that the EVA materials would not provide an adequate reduction in yield stress to ensure against gelation in pipeline transport. Neutron scattering studies, as a function of temperature, of the self-assembly of the EVA co-polymers show dramatically different aggregated structures in decane. The EVA with the lowest ethylene content shows scattering that increases with a power-law exponent of similar to1.6. This scattering behavior is typical for weakly aggregating polymer gels. In contrast, the EVA with the higher ethylene content shows a transition from surface scattering (found for strongly segregated objects) to a plateau whose height is dependent on temperature. Micrographs of the wax crystal morphology indicate that the ethylene-poor EVA alters the wax crystal habit at higher concentrations more effectively than does its higher-ethylene-content counterpart, whereas the latter EVA grade seems to form more wax crystals at low concentrations

Interaction of paraffin wax gels with random crystalline/amorphous hydrocarbon copolymers

The control mechanisms involved in the modification of wax crystal dimensions in crude oils and refined fuels are of joint scientific and practical interest. An understanding of these mechanisms allows strategies to be developed that lead to decreases in crude oil pour points or (for refined fuels) cold filter plugging points. The attainment of these goals involves the control and modification of wax crystals that spontaneously form in mixed hydrocarbon systems upon decreasing temperature. This work reports on the influence of random crystalline-amorphous block copolymers (ethylene-butene) upon the rheology of model oils. In a parallel fashion small-angle neutron scattering was exploited to gain microscopic insight as to how added poly(ethylene-butene) copolymers modify the wax crystal structures. The copolymers with different contents of polyethylene are highly selective with respect to wax crystal modification. Thus, the copolymer with the highest crystalline tendency is more efficient for the larger wax molecules while the less crystalline one is more efficient for the lower waxes

Estimation des propriétés de rétention en eau des sols : Utilisation de classes de pédotransfert après stratifications texturale et texturo-structurale

Un programme de mesures des propriétés de rétention en eau des sols a été développé par l'INRA depuis une dizaine d'années afin de constituer un jeu de données qui puisse être utilisé pour tester les fonctions de pédotransfert (FPT) qui ont été proposées dans la littérature, en établir de nouvelles si celles proposées se révèlent non satisfaisantes et dans ce dernier cas, tester les nouvelles FPT. Dans ce contexte général et partant du constat que les FPT proposées ne permettent pas de prédire les propriétés de rétention en eau de façon satisfaisante, cette étude se propose de suivre une autre voie que celle habituellement suivie pour établir un outil d'estimation des propriétés de rétention en eau. Des classes de pédotransfert (CPT) sont proposées par classe de texture ou par classe combinant texture et structure, cette dernière étant renseignée à l'aide de la densité apparente déterminée sur des mottes de dimensions centimétriques. Ainsi, en utilisant soit la texture seule, soit la texture et la densité apparente de motte, on dispose des teneurs en eau massiques à –10, –33, –100, –330, –1000, –3 300 et –15 000 hPa en fonction de l'appartenance de l'horizon à telle ou telle classe de texture ou, telle ou telle classe combinant texture et densité apparente de motte. La qualité de la prédiction a été testée sur un échantillon de validation ; elle a aussi été comparée à celle qui aurait été obtenue si l'on avait utilisé les CPT de Jamagne et al. (1977). Par rapport à ces CPT, les résultats montrent une importante réduction du biais et un accroissement de la précision lorsque l'on utilise les CPT par classe de texture proposées dans cette étude. Lorsque l'on compare les CPT par classes texturales aux CPT par classes texturo-structurales, il n'y a pas d'amélioration notable du biais mais celui-ci était déjà très faible avec les CPT par classes texturales. En revanche, les CPT par classes texturo-structurales, qui permettent de tenir compte à la fois de la texture et de l'état structural du sol, améliorent la précision des prédictions. Pour les CPT par classes texturales, des teneurs en eau volumiques sont déduites des teneurs en eau massiques en utilisant la densité apparente de l'horizon. Les paramètres du modèle de van Genuchten sont donnés pour chaque classe de CPT. Une démarche permettant de prédire les propriétés de rétention en eau d'un horizon est proposée

Phenotype of autosomal dominant spastic paraplegia linked to chromosome 2

Summary We report the clinical features of 12 families with autosomal dominant spastic paraplegia (ADSP) linked to the SPG4 locus on chromosome 2p, the major locus for this disorder that accounts for ∼40% of the families. Among 93 gene carriers, 32 (34%) were unaware of symptoms but were clinically affected. Haplotype reconstruction showed that 90% of the asymptomatic gene carriers presented increased reflexes and/or extensor plantar responses independent of age at examination. The mean age at onset was 29 years, ranging from 1 to 63 years. Intra- as well as inter-familial variability of age at onset was important, but did not result from anticipation. Phenotype—genotype correlations and comparison with SPG3 and SPG5 families indicated that despite the variability of age at onset, SPG4 is a single genetic entity but no clinical features distinguish individual SPG4 patients from those with SPG3 or SPG5 mutation

Tween® preserves enzyme activity and stability in PLGA nanoparticles

Enzymes, as natural and potentially long-term treatment options, have become one of the most sought-after pharmaceutical molecules to be delivered with nanoparticles (NPs); however, their instability during formulation often leads to underwhelming results. Various molecules, including the Tween® polysorbate series, have demonstrated enzyme activity protection but are often used uncontrolled without optimization. Here, poly(lactic-co-glycolic) acid (PLGA) NPs loaded with β-glucosidase (β-Glu) solutions containing Tween® 20, 60, or 80 were compared. Mixing the enzyme with Tween® pre-formulation had no effect on particle size or physical characteristics, but increased the amount of enzyme loaded. More importantly, NPs made with Tween® 20:enzyme solutions maintained significantly higher enzyme activity. Therefore, Tween® 20:enzyme solutions ranging from 60:1 to 2419:1 mol:mol were further analyzed. Isothermal titration calorimetry analysis demonstrated low affinity and unquantifiable binding between Tween® 20 and β-Glu. Incorporating these solutions in NPs showed no effect on size, zeta potential, or morphology. The amount of enzyme and Tween® 20 in the NPs was constant for all samples, but a trend towards higher activity with higher molar rapports of Tween® 20:β-Glu was observed. Finally, a burst release from NPs in the first hour with Tween®:β-Glu solutions was the same as free enzyme, but the enzyme remained active longer in solution. These results highlight the importance of stabilizers during NP formulation and how optimizing their use to stabilize an enzyme can help researchers design more efficient and effective enzyme loaded NPs

Microfluidic technology for the production of hybrid nanomedicines

Microfluidic technologies have recently been applied as innovative methods for the production of a variety of nanomedicines (NMeds), demonstrating their potential on a global scale. The capacity to precisely control variables, such as the flow rate ratio, temperature, total flow rate, etc., allows for greater tunability of the NMed systems that are more standardized and automated than the ones obtained by well-known benchtop protocols. However, it is a crucial aspect to be able to obtain NMeds with the same characteristics of the previously optimized ones. In this study, we focused on the transfer of a production protocol for hybrid NMeds (H-NMeds) consisting of PLGA, Cholesterol, and Pluronic® F68 from a benchtop nanoprecipitation method to a microfluidic device. For this aim, we modified parameters such as the flow rate ratio, the concentration of core materials in the organic phase, and the ratio between PLGA and Cholesterol in the feeding organic phase. Outputs analysed were the chemico–physical properties, such as size, PDI, and surface charge, the composition in terms of %Cholesterol and residual %Pluronic® F68, their stability to lyophilization, and the morphology via atomic force and electron microscopy. On the basis of the results, even if microfluidic technology is one of the unique procedures to obtain industrial production of NMeds, we demonstrated that the translation from a benchtop method to a microfluidic one is not a simple transfer of already established parameters, with several variables to be taken into account and to be optimized