Exploiting the Optical Limits of Thin‐Film Solar Cells: A Review on Light Management Strategies in Cu(In,Ga)Se 2

Light management strategies are of utmost importance to allow Cu(In,Ga)Se2 (CIGS) technology market expansion, as it would enable a conversion efficiency boost as well as thinner absorber layers, increasing sustainability and reducing production costs. However, fabrication and architecture constraints hamper the direct transfer of light management architectures from other photovoltaic technologies. The demand for light management in thin and ultrathin CIGS cells is analyzed by a critical description of the optical loss mechanisms in these devices. Three main pathways to tackle the optical losses are identified: front light management architectures that assist for an omnidirectional low reflection; rear architectures that enable an enhanced optical path length; and unconventional spectral conversion strategies for full spectral harvesting. An outlook over the challenges and developments of light management architectures is performed, establishing a research roadmap for future works in light management for CIGS technology. Following the extensive review, it is expected that combining antireflection, light trapping, and conversion mechanisms, a 27% CIGS solar cell can be achieved.Fundação para a Ciência e a Tecnologia (FCT) and Fundo Social Europeu (FSE) are acknowledged through the projects IF/00133/2015, UIDB/ 50025/2020, UIDP/50025/2020, UIDB/04730/2020, UIDP/04730/2020, and DFA/BD/4564/2020. This research was also supported by NovaCell—Development of novel Ultrathin Solar Cell Architectures for low-light, low-cost, and flexible optoelectronic device project (028075) cofunded by FCT and ERDF through COMPETE2020. This research was supported by InovSolarCells–Development of innovative nanostructured dielectric materials for interface passivation in thin-film solar cells project (029696) cofunded by FCT and ERDF through COMPETE2020. The authors acknowledge the financial support of the project Baterias 2030, with the reference POCI-01-0247-FEDER-046109, cofunded by Operational Programme for Competitiveness and Internationalization (COMPETE 2020), under the Portugal 2020 Partnership Agreement, through the European Regional Development Fund (ERDF)info:eu-repo/semantics/publishedVersio

Abstract computation in schizophrenia detection through artificial neural network based systems

Schizophrenia stands for a long-lasting state of mental uncertainty that may bring to an end the relation among behavior, thought, and emotion; that is, it may lead to unreliable perception, not suitable actions and feelings, and a sense of mental fragmentation. Indeed, its diagnosis is done over a large period of time; continuos signs of the disturbance persist for at least 6 (six) months. Once detected, the psychiatrist diagnosis is made through the clinical interview and a series of psychic tests, addressed mainly to avoid the diagnosis of other mental states or diseases. Undeniably, the main problem with identifying schizophrenia is the difficulty to distinguish its symptoms from those associated to different untidiness or roles. Therefore, this work will focus on the development of a diagnostic support system, in terms of its knowledge representation and reasoning procedures, based on a blended of Logic Programming and Artificial Neural Networks approaches to computing, taking advantage of a novel approach to knowledge representation and reasoning, which aims to solve the problems associated in the handling (i.e., to stand for and reason) of defective information.This work is funded by National Funds through the FCT, Fundação para a Ciência e a Tecnologia (Portuguese Foundation for Science and Technology) within projects PEstOE/EEI/UI0752/2014 and PEst-OE/QUI/UI0619/2012

Multimethod Assessment of Design, Metallurgical, and Mechanical Characteristics of Original and Counterfeit ProGlider Instruments

Publisher Copyright: © 2022 by the authors. Licensee MDPI, Basel, Switzerland.A multimethod study was conducted to assess the differences between original (PG-OR) and counterfeit (PG-CF) ProGlider instruments regarding design, metallurgical features, and mechanical performance. Seventy PG-OR and PG-CF instruments (n = 35 per group) were evaluated regarding the number of spirals, helical angles, and measuring line position by stereomicroscopy, while blade symmetry, cross-section geometry, tip design, and surface were assessed by scanning electron microscopy. Energy-dispersive X-ray spectroscopy and differential scanning calorimetry were used to identify element ratio and phase transformation temperatures, while cyclic fatigue, torsional, and bending testing were employed to assess their mechanical performance. An unpaired t-test and nonparametric Mann–Whitney U test were used to compare instruments at a significance level of 5%. Similarities were observed in the number of spirals, helical angles, blade symmetry, cross-sectional geometries, and nickel–titanium ratios. Measuring lines were more reliable in the original instrument, while differences were noted in the geometry of the tips (sharper tip for the original and rounded for the counterfeit) and surface finishing with PG-CF presenting more surface irregularities. PG-OR showed significantly more time to fracture (118 s), a higher angle of rotation (440°), and a lower maximum bending load (146.3 gf) (p 0.05). Although the tested instruments had a similar design, the original ProGlider showed superior mechanical behavior. The results of counterfeit ProGlider instruments were unreliable and can be considered unsafe for glide path procedures.publishersversionpublishe

Gellan gum injectable hydrogels for cartilage tissue engineering applications: in vitro studies and preliminary in vivo evaluation

Gellan gum is a polysaccharide that we have previously proposed for applications in the cartilage tissue engineering field. In this work, gellan gum hydrogels were tested for their ability to be used as injectable systems using simple processing methods, able to deliver and maintain chondrocytes by in situ gelation, and support cell viability and production of extracellular matrix (ECM). Rheological measurements determined that the sol–gel transition occurred near the body temperature at 39ºC, upon temperature decrease, in approximately 20 s. Gellan gum discs shows a storage compression modulus of around 80 kPa at a frequency of 1Hz by dynamic mechanical analysis. Human articular chondrocytes were encapsulated in the gels, cultured in vitro for total periods of 56 days, and analyzed for cell viability and ECM production. Calcein AM staining showed that cell kept viable after 14 days and the histological analysis and real-time quantitative polymerase chain reaction revealed that hyaline-like cartilage ECM was synthesized. Finally, the in vivo performance of the gellan gum hydrogels, in terms of induced inflammatory reaction and integration into the host tissue, was evaluated by subcutaneous implantation in Balb/c mice for 21 days. Histological analysis showed a residual fibrotic capsule at the end of the experiments. Dynamic mechanical analysis revealed that the gels were stable throughout the experiments while evidencing a tendency for decreasing mechanical properties, which was consistent with weight measurements. Altogether, the results demonstrate the adequacy of gellan gum hydrogels processed by simple methods for noninvasive injectable applications toward the formation of a functional cartilage tissue-engineered construct and originally report the preliminary response of a living organism to the subcutaneous implantation of the gellan gum hydrogels. These are the two novel features of this work.J. T. Oliveira would like to acknowledge the Portuguese Foundation for Science and Technology for his grant (SFRH/BD17135/2004). The authors would like to thank the patients at Hospital de S. Marcos, Braga, Portugal for the donation of the biological samples, and the medical staff for their help and support. The authors would also like to thank the Institute for Health and Life Sciences, University of Minho, Braga, Portugal, for allowing the use of their research facilities. This work was carried out under the scope of the European NoE EXPERTISSUES (NMP3-CT-2004 500283) and partially supported by the European Project HIPPOCRATES (STRP 505758-1)

Biodegradable nanoparticles containing benzopsoralens : an attractive strategy for modifying vascular function in pathological skin disorders

Psoralens are often used to treat skin disorders such as psoriasis, vitiligo and others. The toxicity and fast degradation of these drugs can be diminished by encapsulation in drug delivery systems (DDS). Nanoparticles (NPs) containing the benzopsoralen (BP) (3-ethoxy carbonyl-2H-benzofuro[3,2-e]-1-benzopiran-2-one) were prepared by the solvent evaporation technique, and parameters such as particle size, zeta potential, drug encapsulation efficiency, and external morphology were evaluated. The analysis revealed that the NPs are spherical and possessed a smooth external surface with diameter of 815 ± 80 nm, they present low tendency toward aggregation, as confirmed by their zeta potential (+17.3±2.9 mV) and the encapsulation efficiency obtained was 74%. The intracellular distribution of NPs as well as their uptake by tissues was monitored by using laser confocal microscopy and transmission electron microscopy. The use of benzopsoralen in association with ultraviolet light (360 nm) revealed morphological characteristics of cell damage such as cytosolic vesiculation, mitochondria condensation, and swelling of both the granular endoplasmic reticulum and the nuclear membrane. The primary target of DDS and drugs in vascular system are endothelial cells and an attractive strategy for modifying vascular function in various pathological states of skin disorders, cancer and inflammation. The result presented in this work indicates that PLGA NP could be a promising delivery system for benzopsoralen in connection with ultraviolet irradiation therapy (PUVA) for further application in different therapies.CNPq , CAPES, FAPESP (Braisl

Optoelectronic simulations for novel light management concepts in Cu(In,Ga)Se2 solar cells

One of the trends making its way through the Photovoltaics (PV) industry, is the search for new application possibilities. Cu(In,Ga)Se2 (CIGS) thin film solar cells stand out due to their class leading power conversion efficiency of 23.35 %, flexibility, and low cost. The use of sub-μm ultrathin CIGS solar cells has been gaining prevalence, due to the reduction in material consumption and the manufacturing time. Precise CIGS finite-difference time-domain (FDTD) and 3D-drift diffusion baseline models were developed for the Lumerical suite and a 1D electrical model for SCAPS, allowing for an accurate description of the optoelectronic behavior and response of thin and ultrathin CIGS solar cells. As a result, it was possible to obtain accurate descriptions of the optoelectronic behavior of thin and ultrathin solar cells, and to perform an optical study and optimization of novel light management approaches, such as, random texturization, photonic nanostructures, plasmonic nanoparticles, among others. The developed light management architectures enabled to push the optical performance of an ultrathin solar cell and even surpass the performance of a thin film solar cell, enabling a short-circuit current enhancement of 6.15 mA/cm2 over an ultrathin reference device, without any light management integrated.publishe

On the importance of joint mitigation strategies for front, bulk, and rear recombination in ultrathin Cu(In,Ga)Se2 solar cells

Several optoelectronic issues, such as poor optical absorption and recombination limit the power conversion efficiency of ultrathin Cu(In,Ga)Se2 (CIGS) solar cells. To mitigate recombination losses, two combined strategies were implemented: a Potassium Fluoride (KF) Post-Deposition Treatment (PDT) and a rear interface passivation strategy based on an Aluminium Oxide (Al2O3) point contact structure. The simultaneous implementation of both strategies is reported for the first time on ultrathin CIGS devices. Electrical measurements and 1-D simulations demonstrate that, in specific conditions, devices with only KF-PDT may outperform rear interface passivated based devices. By combining KF-PDT and rear interface passivation, an enhancement in open-circuit voltage of 178 mV is reached over devices that have a rear passivation only and of 85 mV over devices with only a KF-PDT process. Time-Resolved Photoluminescence measurements showed the beneficial effects of combining KF-PDT and the rear interface passivation at decreasing recombination losses in the studied devices, enhancing charge carrier lifetime. X-ray photoelectron spectroscopy measurements indicate the presence of a In and Se rich layer that we linked to be a KInSe2 layer. Our results suggest that when bulk and front interface recombination values are very high, they dominate and individual passivation strategies work poorly. Hence, this work shows that for ultrathin devices, passivation mitigation strategies need to be implemented in tandem.publishe

On the importance of joint mitigation strategies for front, bulk, and rear recombination in ultrathin Cu(In,Ga)Se2 solar cells

Several optoelectronic issues, such as poor optical absorption and recombination limit the power conversion efficiency of ultrathin Cu(In,Ga)Se2 (CIGS) solar cells. To mitigate recombination losses, two combined strategies were implemented: a Potassium Fluoride (KF) Post-Deposition Treatment (PDT) and a rear interface passivation strategy based on an Aluminium Oxide (Al2O3) point contact structure. The simultaneous implementation of both strategies is reported for the first time on ultrathin CIGS devices. Electrical measurements and 1-D simulations demonstrate that, in specific conditions, devices with only KF-PDT may outperform rear interface passivated based devices. By combining KF-PDT and rear interface passivation, an enhancement in open-circuit voltage of 178 mV is reached over devices that have a rear passivation only and of 85 mV over devices with only a KF-PDT process. Time-Resolved Photoluminescence measurements showed the beneficial effects of combining KF-PDT and the rear interface passivation at decreasing recombination losses in the studied devices, enhancing charge carrier lifetime. X-ray photoelectron spectroscopy measurements indicate the presence of a In and Se rich layer that we linked to be a KInSe2 layer. Our results suggest that when bulk and front interface recombination values are very high, they dominate and individual passivation strategies work poorly. Hence, this work shows that for ultrathin devices, passivation mitigation strategies need to be implemented in tandem.publishe

Mitochondrionopathy Phenotype in Doxorubicin-Treated Wistar Rats Depends on Treatment Protocol and Is Cardiac-Specific

Although doxorubicin (DOX) is a very effective antineoplastic agent, its clinical use is limited by a dose-dependent, persistent and cumulative cardiotoxicity, whose mechanism remains to be elucidated. Previous works in animal models have failed to use a multi-organ approach to demonstrate that DOX-associated toxicity is selective to the cardiac tissue. In this context, the present work aims to investigate in vivo DOX cardiac, hepatic and renal toxicity in the same animal model, with special relevance on alterations of mitochondrial bioenergetics. To this end, male Wistar rats were sub-chronically (7 wks, 2 mg/Kg) or acutely (20 mg/Kg) treated with DOX and sacrificed one week or 24 hours after the last injection, respectively. Alterations of mitochondrial bioenergetics showed treatment-dependent differences between tissues. No alterations were observed for cardiac mitochondria in the acute model but decreased ADP-stimulated respiration was detected in the sub-chronic treatment. In the acute treatment model, ADP-stimulated respiration was increased in liver and decreased in kidney mitochondria. Aconitase activity, a marker of oxidative stress, was decreased in renal mitochondria in the acute and in heart in the sub-chronic model. Interestingly, alterations of cardiac mitochondrial bioenergetics co-existed with an absence of echocardiograph, histopathological or ultra-structural alterations. Besides, no plasma markers of cardiac injury were found in any of the time points studied. The results confirm that alterations of mitochondrial function, which are more evident in the heart, are an early marker of DOX-induced toxicity, existing even in the absence of cardiac functional alterations

Encapsulation of Nanostructures in a Dielectric Matrix Providing Optical Enhancement in Ultrathin Solar Cells

The incorporation of nanostructures in optoelectronic devices for enhancing their optical performance is widely studied. However, several problems related to the processing complexity and the low performance of the nanostructures have hindered such actions in real-life devices. Herein, a novel way of introducing gold nanoparticles in a solar cell structure is proposed in which the nanostructures are encapsulated with a dielectric layer, shielding them from high temperatures and harsh growth processing conditions of the remaining device. Through optical simulations, an enhancement of the effective optical path length of approximately four times the nominal thickness of the absorber layer is verified with the new architecture. Furthermore, the proposed concept in a Cu(In,Ga)Se2 solar cell device is demonstrated, where the short-circuit current density is increased by 17.4%. The novel structure presented in this work is achieved by combining a bottom-up chemical approach of depositing the nanostructures with a top-down photolithographic process, which allows for an electrical contact.This work was funded in part by the Fundação para a Ciência e a Tecnologia (FCT) under Grants IF/00133/2015, PD/BD/142780/2018 and SFRH/BD/ 146776/2019. The authors also want to acknowledge the European Union’s Horizon 2020 Research and Innovation Programme through the ARCIGS-M project under Grant 720887, the Special Research Fund (BOF) of Hasselt University, the FCT through the project NovaCell (PTDC/CTM-CTM/28075/ 2017), and InovSolarCells (PTDC/FISMAC/29696/2017) co-funded by FCT and the ERDF through COMPETE2020. The authors also want to acknowledge Sandra Maya for the production of images used in this work.info:eu-repo/semantics/publishedVersio