Narrow-escape-time problem: the imperfect trapping case

We present a master equation approach to the \emph{narrow escape time} (NET) problem, i.e. the time needed for a particle contained in a confining domain with a single narrow opening, to exit the domain for the first time. We introduce a finite transition probability, $\nu$, at the narrow escape window allowing the study of the imperfect trapping case. Ranging from 0 to $\infty$, $\nu$ allowed the study of both extremes of the trapping process: that of a highly deficient capture, and situations where escape is certain ("perfect trapping" case). We have obtained analytic results for the basic quantity studied in the NET problem, the \emph{mean escape time} (MET), and we have studied its dependence in terms of the transition (desorption) probability over (from) the surface boundary, the confining domain dimensions, and the finite transition probability at the escape window. Particularly we show that the existence of a global minimum in the NET depends on the `imperfection' of the trapping process. In addition to our analytical approach, we have implemented Monte Carlo simulations, finding excellent agreement between the theoretical results and simulations.Comment: 9 page

Sintered Cr/Pt and Ni/Au ohmic contacts to B12P2

Citation: Frye, C. D., Kucheyev, S. O., Edgar, J. H., Voss, L. F., Conway, A. M., Shao, Q. H., & Nikolic, R. J. (2015). Sintered Cr/Pt and Ni/Au ohmic contacts to B12P2. Journal of Vacuum Science & Technology A, 33(3), 6. doi:10.1116/1.4917010Icosahedral boron phosphide (B12P2) is a wide-bandgap semiconductor possessing interesting properties such as high hardness, chemical inertness, and the reported ability to self-heal from irradiation by high energy electrons. Here, the authors developed Cr/Pt and Ni/Au ohmic contacts to epitaxially grown B12P2 for materials characterization and electronic device development. Cr/Pt contacts became ohmic after annealing at 700 degrees C for 30 s with a specific contact resistance of 2 x 10(-4) Omega cm(2), as measured by the linear transfer length method. Ni/Au contacts were ohmic prior to any annealing, and their minimum specific contact resistance was similar to l-4 x 10(-4) Omega cm(2) after annealing over the temperature range of 500-800 degrees C. Rutherford backscattering spectrometry revealed a strong reaction and intermixing between Cr/Pt and B12P2 at 700 degrees C and a reaction layer between Ni and B12P2 thinner than similar to 25 nm at 500 degrees C. (C) 2015 American Vacuum Society

Detection of defect populations in superhard semiconductor boron subphosphide B12P2 through X-ray absorption spectroscopy

Citation: Detection of defect populations in superhard semiconductor boron subphosphide B12P2 through X-ray absorption spectroscopy. S. P. Huber, E. Gullikson, J. Meyer-Ilse, C. D. Frye, J. H. Edgar, R. W. E. van de Kruijs, F. Bijkerk, and D. Prendergast J. Mater. Chem. A 5 5737--5749 (2017) 10.1039/c6ta10935gRecent theoretical work has shown for the first time how the experimentally observed property of “self-healing” of the superhard semiconductor boron subphosphide (B12P2) arises through a process of mediated defect recombination. Experimental verification of the proposed mechanism would require a method that can detect and distinguish between the various defect populations that can exist in B12P2. X-ray absorption near-edge spectroscopy (XANES) is such a method and in this work we present experimentally collected spectra of B12P2samples with varying crystalline qualities. By simulating the X-ray spectroscopic signatures of potential crystallographic point defects from first-principles within the density functional theory framework, the presence of defect populations can be determined through spectroscopic fingerprinting. Our results find an increasing propensity for the presence of phosphorus vacancy defects in samples deposited at lower temperatures but no evidence for comparable populations of boron vacancies in all the samples that have been studied. The absence of large amounts of boron vacancies is in line with the “self-healing” property of B12P2

Particles at oil–air surfaces : powdered oil, liquid oil marbles, and oil foam

The type of material stabilized by four kinds of fluorinated particles (sericite and bentonite platelet clays and spherical zinc oxide) in air–oil mixtures has been investigated. It depends on the particle wettability and the degree of shear. Upon vigorous agitation, oil dispersions are formed in all the oils containing relatively large bentonite particles and in oils of relatively low surface tension (γla < 26 mN m⁻¹) like dodecane, 20 cS silicone, and cyclomethicone containing the other fluorinated particles. Particle-stabilized oil foams were obtained in oils having γla > 26 mN m⁻¹ where the advancing air–oil–solid contact angle θ lies between ca. 90° and 120°. Gentle shaking, however, gives oil-in-air liquid marbles with all the oil–particle systems except for cases where θ is <60°. For oils of tension >24 mN m⁻¹ with omniphobic zinc oxide and sericite particles for which advancing θ ≥ 90°, dry oil powders consisting of oil drops in air which do not leak oil could be made upon gentle agitation up to a critical oil:particle ratio (COPR). Above the COPR, catastrophic phase inversion of the dry oil powders to air-in-oil foams was observed. When sheared on a substrate, the dry oil powders containing at least 60 wt % of oil release the encapsulated oil, making these materials attractive formulations in the cosmetic and food industries

Detection of ESKAPE bacterial pathogens at the point of care using isothermal DNA-based assays in a portable degas-actuated microfluidic diagnostic assay platform

An estimated 1.5 billion microbial infections occur globally each year and result in ~4.6 million deaths. A technology gap associated with commercially available diagnostic tests in remote and underdeveloped regions prevents timely pathogen identification for effective antibiotic chemotherapies for infected patients. The result is a trial-and-error approach that is limited in effectiveness, increases risk for patients while contributing to antimicrobial drug resistance, and reduces the lifetime of antibiotics. This paper addresses this important diagnostic technology gap by describing a low-cost, portable, rapid, and easy-to-use microfluidic cartridgebased system for detecting the ESKAPE (Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, and Enterobacter spp.) bacterial pathogens that are most commonly associated with antibiotic resistance. The point-of-care molecular diagnostic system consists of a vacuumdegassed microfluidic cartridge preloaded with lyophilized recombinase polymerase amplification (RPA) assays and a small portable battery-powered electronic incubator/ reader. The isothermal RPA assays detect the targeted ESKAPE pathogens with high sensitivity (e.g., a limit of detection of ~10 nucleic acid molecules) that is comparable to that of current PCR-based assays, and they offer advantages in power consumption, engineering, and robustness, which are three critical elements required for the point-of-care setting

Emerging Themes from the ESA Symposium Entitled “Pollinator Nutrition: Lessons from Bees at Individual to Landscape Levels”

Pollinator populations are declining (Biesmeijer et al., 2006; Brodschneider et al., 2018; Cameron et al., 2011; Goulson, Lye, & Darvill, 2008; Kulhanek et al., 2017; National Research Council, 2007; Oldroyd, 2007), and both anecdotal and experimental evidence suggest that limited access to high quality forage might play a role (Carvell, Meek, Pywell, Goulson, & Nowakowski, 2007; Deepa et al., 2017; Goulson, Nicholls, Botias, & Rotheray, 2015; Potts et al., 2003, 2010; Vanbergen & The Insect Pollinators Initiative, 2013; Vaudo, Tooker, Grozinger, & Patch, 2015; Woodard, 2017). Multiple researchers are earnestly addressing this topic in a diverse array of insect-pollinator systems. As research continues to be published, increased communication among scientists studying the topic of nutrition is essential for improving pollinator health

Improving pregnancy outcomes in humans through studies in sheep

Experimental studies that are relevant to human pregnancy rely on the selection of appropriate animal models as an important element in experimental design. Consideration of the strengths and weaknesses of any animal model of human disease is fundamental to effective and meaningful translation of preclinical research. Studies in sheep have made significant contributions to our understanding of the normal and abnormal development of the fetus. As a model of human pregnancy, studies in sheep have enabled scientists and clinicians to answer questions about the etiology and treatment of poor maternal, placental, and fetal health and to provide an evidence base for translation of interventions to the clinic. The aim of this review is to highlight the advances in perinatal human medicine that have been achieved following translation of research using the pregnant sheep and fetus

Mine closure of pit lakes as terminal sinks: best available practice when options are limited?

In an arid climate, pit lake evaporation rates can exceed influx rates, causing the lake to function as a hydraulic terminal sink, with water levels in the pit remaining below surrounding groundwater levels. We present case studies from Western Australia for two mines nearing closure. At the first site, modelling indicates that waste dump covers for the potentially acid forming (PAF) material would not be successful over the long term (1,000 years or more). The second site is a case study where PAF management is limited by the current waste rock dump location and suitable cover materials. Pit lake water balance modelling using Goldsim software indicated that both pit lakes would function as hydraulic terminal sinks if not backfilled above long-term equilibrium water levels. Poor water quality will likely develop as evapoconcentration increases contaminant concentrations, providing a potential threat to local wildlife. Even so, the best current opportunity to limit the risk of contaminant migration and protect regional groundwater environments may be to limit backfill and intentionally produce a terminal sink pit lake

The fate of Böhler's angle in conservatively-treated displaced intra-articular calcaneal fractures

Purpose: Although the predictive value of Böhler's angle on outcome remains subject of debate, the initial angle at the time of trauma still guides treatment. Changes in Böhler's angle during follow-up are frequently reported following surgical treatment of displaced intra-articular calcaneal fractures (DIACF). The aim of the present study was to determine the changes in Böhler's angle as a measure of secondary fracture displacement following conservative management of DIACF. Methods: Thirty-eight patients with a total of 44 displaced intra-articular calcaneal fractures treated conservatively with a minimum of two lateral radiographs during follow-up were analysed. Böhler's angle at different follow-up times was measured by three observers. The change in angle was compared with the angle at trauma, and influence of trauma mechanism and common calcaneal fracture classifications were determined. Results: The results showed a significant decline over time of the Böhler's angle in conservatively-treated patients of more than 11° on average at a mean follow-up of 29.2 weeks. This decrease was not related to gender, the initial angle, or the Essex-Lopresti or Sanders classification. A statistically significantly higher decrease was detected in high energetic trauma compared with low energetic trauma. Conclusion: The conservative treatment of displaced intra-articular calcaneal fractures is still a viable option, yet a significant secondary displacement in time should be taken into account, as reflected in a decrease of Böhler's angle of 11° up to one year following trauma