Resolvable designs with large blocks

Resolvable designs with two blocks per replicate are studied from an optimality perspective. Because in practice the number of replicates is typically less than the number of treatments, arguments can be based on the dual of the information matrix and consequently given in terms of block concurrences. Equalizing block concurrences for given block sizes is often, but not always, the best strategy. Sufficient conditions are established for various strong optimalities and a detailed study of E-optimality is offered, including a characterization of the E-optimal class. Optimal designs are found to correspond to balanced arrays and an affine-like generalization.Comment: Published at http://dx.doi.org/10.1214/009053606000001253 in the Annals of Statistics (http://www.imstat.org/aos/) by the Institute of Mathematical Statistics (http://www.imstat.org

Development of Ground-testable Phase Fresnel Lenses in Silicon

Diffractive/refractive optics, such as Phase Fresnel Lenses (PFL's), offer the potential to achieve excellent imaging performance in the x-ray and gamma-ray photon regimes. In principle, the angular resolution obtained with these devices can be diffraction limited. Furthermore, improvements in signal sensitivity can be achieved as virtually the entire flux incident on a lens can be concentrated onto a small detector area. In order to verify experimentally the imaging performance, we have fabricated PFL's in silicon using gray-scale lithography to produce the required Fresnel profile. These devices are to be evaluated in the recently constructed 600-meter x-ray interferometry testbed at NASA/GSFC. Profile measurements of the Fresnel structures in fabricated PFL's have been performed and have been used to obtain initial characterization of the expected PFL imaging efficiencies.Comment: Presented at GammaWave05: "Focusing Telescopes in Nuclear Astrophysics", Bonifacio, Corsica, September 2005, to be published in Experimental Astronomy, 8 pages, 3 figure

Free electron laser generation of X-ray Poincaré beams

An optics-free method is proposed to generate x-ray radiation with spatially variant states of polarization via an afterburner extension to a free electron laser. Control of the polarization in the transverse plane is obtained through the overlap of different coherent transverse light distributions radiated from a bunched electron beam in two consecutive orthogonally polarised undulators. Different transverse profiles are obtained by emitting at a higher harmonic in one or both of the undulators. This method enables the generation of beams structured in their intensity, phase, and polarization - so-called Poincaré beams - at high powers with tunable wavelengths. Simulations are used to demonstrate the generation of two different classes of light with spatially inhomogeneous polarization - cylindrical vector beams and full Poincaré beams

Coherent transport by adiabatic passage on atom chips

Adiabatic techniques offer some of the most promising tools for achieving high-fidelity control of the center-of-mass degree of freedom of single atoms. Because the main requirement of these techniques is to follow an eigenstate of the system, constraints on timing and field strength stability are usually low, especially for trapped systems. In this paper we present a detailed example of a technique to adiabatically transport a single atom between different waveguides on an atom chip. To ensure that all conditions are fulfilled, we carry out fully three-dimensional simulations of the system, using experimentally realistic parameters. We also detail our method for simulating the system in very reasonable time scales on a consumer desktop machine by leveraging the power of graphics-processing-unit computing

Sediment Phosphorus Release at Lake Fayetteville, Summer 2020

The purpose of this project was to evaluate the release of dissolved phosphorus (P) from bottom sediment at Lake Fayetteville, and the potential use of aluminum sulfate (Al2(SO4)3) to remediate the P stored and released by bottom sediments. Intact sediment cores (n=18) were taken at three locations, named inlet, mid and dam sites at Lake Fayetteville. The cores were incubated with 1 L of overlying water with light excluded and bubbled with air (half, aerobic treatment) and N2 (other half, anaerobic). Water samples were pulled and analyzed for soluble reactive P (SRP), and that water was replaced with filtered lake water with SRP less than the lab’s method detection limit (MDL, ≤0.005 mg L‐1). The SRP mass accumulating in the overlying water was used to estimate SRP release rates from the sediment, and mean rates were compared by treatments, sites and before and after alum dosing. Sediment SRP release rates were significantly greater under anaerobic conditions (mean=7.22 mg m‐2 d‐1) than aerobic (mean=0.85 mg m‐2 d‐1), and within those conditions rates were not different between sites. The addition of alum to the overlying water reduced SRP concentrations near the MDL in most cores, and sediment SRP release rates were significantly less after alum dosing, except for the cores from the mid lake site under aerobic conditions. Overall, it likely that this internal SRP source is an important factor in the development and occurrence of harmful algal blooms (and likely microcystin production) at Lake Fayetteville. Alum might be a means to successfully reduce this internal SRP source

Shocked Quartz in Polymict Impact Breccia from the Upper Cretaceous Yallalie Impact Structure in Western Australia

Yallalie is a ~12 km diameter circular structure located ~200 km north of Perth, Australia. Previous studies have proposed that the buried structure is a complex impact crater based on geophysical data. Allochthonous breccia exposed near the structure has previously been interpreted as proximal impact ejecta; however, no diagnostic indicators of shock metamorphism have been found. Here we report multiple (27) shocked quartz grains containing planar fractures (PFs) and planar deformation features (PDFs) in the breccia. The PFs occur in up to five sets per grain, while the PDFs occur in up to four sets per grain. Universal stage measurements of all 27 shocked quartz grains confirms that the planar microstructures occur in known crystallographic orientations in quartz corresponding to shock compression from 5 to 20 GPa. Proximity to the buried structure (~4 km) and occurrence of shocked quartz indicates that the breccia represents either primary or reworked ejecta. Ejecta distribution simulated using iSALE hydrocode predicts the same distribution of shock levels at the site as those found in the breccia, which supports a primary ejecta interpretation, although local reworking cannot be excluded. The Yallalie impact event is stratigraphically constrained to have occurred in the interval from 89.8 to 83.6 Ma based on the occurrence of Coniacian clasts in the breccia and undisturbed overlying Santonian to Campanian sedimentary rocks. Yallalie is thus the first confirmed Upper Cretaceous impact structure in Australia

Neurological Complications of Elbow Arthroscopy

Elbow arthroscopy is an increasingly common procedure performed in orthopedic surgery. However, due to the presence of several major neurovascular structures in close proximity to the operative portals, it can have potentially devastating complications. The largest series of elbow arthroscopies to date described a 2.5% rate of post-operative neurological injury. All of these injuries were transient nerve injuries resolved without intervention. A recent report of major nerve injuries after elbow arthroscopy demonstrated that these injuries are likely under-reported in literature. A review of our records from 1998 to 2014 revealed six patients who had undergone elbow arthroscopy and developed neurological injury post-operatively. While complications after elbow arthroscopy are rare, the most common permanent nerve palsy post-operatively is the posterior interosseous nerve (PIN) followed by the ulnar nerve. Because of the surrounding neurovascular structures, familiarity with the normal elbow anatomy and portals will decrease the risk of damage to important structures. The purpose of this chapter is to review important steps in performing elbow arthroscopy with an emphasis on avoiding neurovascular injury. With a sound understanding of the important bony anatomic landmarks, sensory nerves, and neurovascular structures, elbow arthroscopy can provide both diagnostic and therapeutic intervention with little morbidity

Biomechanical, ultrastructural, and electrophysiological characterization of the non-human primate experimental glaucoma model.

Laser-induced experimental glaucoma (ExGl) in non-human primates (NHPs) is a common animal model for ocular drug development. While many features of human hypertensive glaucoma are replicated in this model, structural and functional changes in the unlasered portions of trabecular meshwork (TM) of laser-treated primate eyes are understudied. We studied NHPs with ExGl of several years duration. As expected, ExGl eyes exhibited selective reductions of the retinal nerve fiber layer that correlate with electrophysiologic measures documenting a link between morphologic and elctrophysiologic endpoints. Softening of unlasered TM in ExGl eyes compared to untreated controls was observed. The degree of TM softening was consistent, regardless of pre-mortem clinical findings including severity of IOP elevation, retinal nerve fiber layer thinning, or electrodiagnostic findings. Importantly, this softening is contrary to TM stiffening reported in glaucomatous human eyes. Furthermore, microscopic analysis of unlasered TM from eyes with ExGl demonstrated TM thinning with collapse of Schlemm's canal; and proteomic analysis confirmed downregulation of metabolic and structural proteins. These data demonstrate unexpected and compensatory changes involving the TM in the NHP model of ExGl. The data suggest that compensatory mechanisms exist in normal animals and respond to elevated IOP through softening of the meshwork to increase outflow