1,523 research outputs found
Damage avoidance design steel beam-column moment connection using high-force-to-volume dissipators
Existing welded steel moment frames are designed to tolerate substantial yielding and plastic rotation under earthquake loads. This sacrificial design approach can lead to permanent, and often irreparable damage when interstory drifts exceed 2%. The experimental seismic performance of a 50% full-scale damage avoidance designed structural steel beam-column connection is presented. The beam-column joint region consists of a top flange-hung beam connected to the column by an angle bracket. High-force-to-volume (HF2V) devices are attached from the column to the beam to provide joint rigidity and energy dissipation as the joint opens and closes. The HF2V devices are connected either below the beam flange or concealed above the beam's lower flange. Reversed cyclic lateral load tests are conducted with drift amplitudes up to 4%. No damage is observed in the principal beam and column structural elements. The need for stiff device connections to achieve optimal device performance is demonstrated, and potential design solutions presented. Stable hysteresis and repeatable energy dissipation for a large number of cycles up to the 4% drift level is observed. It is concluded that superior and repeatable energy dissipation without damage can be achieved for every dynamic motion cycle, in contrast to conventional sacrificially designed welded moment frame connections
Influence of Vertical Ground Motions on the Seismic Fragility Modeling of a Bridge-Soil-Foundation System
This paper explores the effects of vertical ground motions (VGMs) on the
component fragility of a coupled bridged-soil-foundation (CBSF) system with
liquefaction potential, and highlights the unique considerations on the demand
and capacity model required for fragility analysis under VGMs. Optimal intensity
measures (IMs) that account for VGMs are identified. Moreover, fragility curves
that consider capacity change with fluctuating axial force are derived. Results
show that the presence of VGMs has a minor effect on the failure probabilities
of piles and expansion bearings, while it has a great influence on fixed bearings.
Whether VGMs have an impact on column fragilities depends on the design axial
load ratio. Finally, more accurate fragility surfaces are derived, which are compared
with results of conventional fragility curves. This study highlights the
important role that VGMs play in the selection of optimal IMs, and the capacity
and fragility representation of certain components of CBSF systems
A case study evaluation of implementation of a care pathway to support normal birth in one English birth centre: anticipated benefits and unintended consequences
Background: The policy drive for the UK National Health Service (NHS) has focused on the need for high quality services informed by evidence of best practice. The introduction of care pathways and protocols to standardise care and support implementation of evidence into practice has taken place across the NHS with limited evaluation of their impact. A multi-site case study evaluation was undertaken to assess the impact of use of care pathways and protocols on clinicians, service users and service delivery. One of the five sites was a midwifery-led Birth Centre, where an adapted version of the All Wales Clinical Pathway for Normal Birth had been implemented.
Methods: The overarching framework was realistic evaluation. A case study design enabled the capture of data on use of the pathway in the clinical setting, use of multiple methods of data collection and opportunity to study and understand the experiences of clinicians and service users whose care was informed by the pathway. Women attending the Birth Centre were recruited at their 36 week antenatal visit. Episodes of care during labour were observed, following which the woman and the midwife who cared for her were interviewed about use of the pathway. Interviews were also held with other key stakeholders from the study site. Qualitative data were content analysed.
Results: Observations were undertaken of four women during labour. Eighteen interviews were conducted with clinicians and women, including the women whose care was observed and the midwives who cared for them, senior midwifery managers and obstetricians. The implementation of the pathway resulted in a number of anticipated benefits, including increased midwifery confidence in skills to support normal birth and promotion of team working. There were also unintended consequences, including concerns about a lack of documentation of labour care and negative impact on working relationships with obstetric and other midwifery colleagues. Women were unaware their care was informed by a care pathway.
Conclusion: Care pathways are complex interventions which generate a number of consequences for practice. Those considering introduction of pathways need to ensure all relevant stakeholders are engaged with this and develop robust evaluation strategies to accompany implementation
Professionalism and person-centredness: developing a practice based approach to leadership within NHS maternity services in the UK
This paper, based on data taken from in-depth interviews with senior midwives and obstetricians and conducted as part of a critical ethnographic study, argues for a greater appreciation of person-centred, value-led midwifery practice. The paper begins with a discussion of the way midwifery practice is shaped by encoded and embodied knowledge. The paper subsequently focuses on an emergent practice based leadership using an adapted Aristotelian conceptual framework derived from MacIntyre (2007). Professional dissonance is highlighted as a difficulty experienced by repositioned managers who are also expected to be leaders in their field. Using data gathered from in-depth interviews it is contended that establishing person-centred care might be better achieved through the development of practice based leadership (rather than solely by adherence to organisational requirements). This type of leadership could potentially nurture a professional environment that promotes qualities, such as agency, commitment and high levels of competence among midwives. Such leadership is central to UK government priorities and is applicable to a global practice development agenda
Seed and 4-Chloroindole-3-Acetic Acid Regulation of Gibberellin Metabolism in Pea Pericarp
Idiotypic DNA vaccination for the treatment of multiple myeloma: safety and immunogenicity in a phase I clinical study
We report on the safety and immunogenicity of idiotypic DNA vaccination in a phase I, non-randomised, open-label study in patients with multiple myeloma. The study used DNA fusion gene vaccines encoding patient-specific single chain variable fragment, or idiotype (Id), linked to fragment C (FrC) of tetanus toxin. Patients in complete or partial response following high-dose chemotherapy and autologous stem cell transplant were vaccinated intramuscularly with 1 mg DNA on six occasions, beginning at least 6 months post-transplant; follow-up was to week 52. Fourteen patients were enrolled on study and completed vaccinations. Idiotypic DNA vaccines were well tolerated with vaccine-related adverse events limited to low-grade constitutional symptoms. FrC- and Id-specific T-cell responses were detected by ex vivo ELISPOT in 9/14 and 3/14 patients, respectively. A boost of pre-existing anti-FrC antibody (Ab) was detected by ELISA in 8/14 patients, whilst anti-Id Ab was generated in 1/13 patients. Overall, four patients (29 %) made an immune response to FrC and Id, with six patients (43 %) responding to FrC alone. Over the 52-week study period, serum paraprotein was undetectable, decreased or remained stable for ten patients (71 %), whilst ongoing CR/PR was maintained for 11 patients (79 %). The median time to progression was 38.0 months for 13/14 patients. Overall survival was 64 % after a median follow-up of 85.6 months
Phylogenetic and ecological correlates of pollen morphological diversity in a Neotropical rainforest
Morphology varies enormously across clades, and the morphology of a trait may reflect ecological function or the retention of ancestral features. We examine the tension between ecological and phylogenetic correlates of morphological diversity through a case study of pollen grains produced by angiosperms in Barro Colorado Island, Panama (BCI). Using a molecular phylogeny of 730 taxa, we demonstrate a statistically significant association between morphological and genetic distance for these plants. However, the relationship is non‐linear, and while close relatives share more morphological features than distant relatives, above a genetic distance of ~ 0.7 increasingly distant relatives are not more divergent in phenotype. The pollen grains of biotically pollinated and abiotically pollinated plants overlap in morphological space, but certain pollen morphotypes and individual morphological traits are unique to these pollination ecologies. Our data show that the pollen grains of biotically pollinated plants are significantly more morphologically diverse than those of abiotically pollinated plants
Capturing the Surface Texture and Shape of Pollen: A Comparison of Microscopy Techniques
Research on the comparative morphology of pollen grains depends crucially on the application of appropriate microscopy techniques. Information on the performance of microscopy techniques can be used to inform that choice. We compared the ability of several microscopy techniques to provide information on the shape and surface texture of three pollen types with differing morphologies. These techniques are: widefield, apotome, confocal and two-photon microscopy (reflected light techniques), and brightfield and differential interference contrast microscopy (DIC) (transmitted light techniques). We also provide a first view of pollen using super-resolution microscopy. The three pollen types used to contrast the performance of each technique are: Croton hirtus (Euphorbiaceae), Mabea occidentalis (Euphorbiaceae) and Agropyron repens (Poaceae). No single microscopy technique provided an adequate picture of both the shape and surface texture of any of the three pollen types investigated here. The wavelength of incident light, photon-collection ability of the optical technique, signal-to-noise ratio, and the thickness and light absorption characteristics of the exine profoundly affect the recovery of morphological information by a given optical microscopy technique. Reflected light techniques, particularly confocal and two-photon microscopy, best capture pollen shape but provide limited information on very fine surface texture. In contrast, transmitted light techniques, particularly differential interference contrast microscopy, can resolve very fine surface texture but provide limited information on shape. Texture comprising sculptural elements that are spaced near the diffraction limit of light (∼250 nm; NDL) presents an acute challenge to optical microscopy. Super-resolution structured illumination microscopy provides data on the NDL texture of A. repens that is more comparable to textural data from scanning electron microscopy than any other optical microscopy technique investigated here. Maximizing the recovery of morphological information from pollen grains should lead to more robust classifications, and an increase in the taxonomic precision with which ancient vegetation can be reconstructed
Evaluation of a brief art psychotherapy group for adults suffering from mild to moderate depression: Pilot pre, post and follow-up study
- …