389 research outputs found
High dispersive and monolithic 100% efficiency grisms
We present a type of grism, a series combination of transmission grating and
prism, in which we reduce the number of diffraction orders and achieve a
configuration with very high angular dispersion. The grism can be fabricated
from a single dielectric material and requires no metallic or dielectric film
layers for high transmission diffraction efficiency. One can reach 100% in the
-1st transmission diffraction order and the equal damage threshold as the
dielectric bulk material. We realized such an element in fused silica with an
efficiency of more then 99%. The bevel backside reflection is reduced by a
statistical antireflective structure, so we measured an efficiency of the
entire grism of 95% at a single wavelength
Recommended from our members
Femtosecond laser writing of waveguides in glass: Α new way to 3D integrated optics
[no abstract available
Multi-Pulse Laser Wakefield Acceleration: A New Route to Efficient, High-Repetition-Rate Plasma Accelerators and High Flux Radiation Sources
Laser-driven plasma accelerators can generate accelerating gradients three
orders of magnitude larger than radio-frequency accelerators and have achieved
beam energies above 1 GeV in centimetre long stages. However, the pulse
repetition rate and wall-plug efficiency of plasma accelerators is limited by
the driving laser to less than approximately 1 Hz and 0.1% respectively. Here
we investigate the prospects for exciting the plasma wave with trains of
low-energy laser pulses rather than a single high-energy pulse. Resonantly
exciting the wakefield in this way would enable the use of different
technologies, such as fibre or thin-disc lasers, which are able to operate at
multi-kilohertz pulse repetition rates and with wall-plug efficiencies two
orders of magnitude higher than current laser systems. We outline the
parameters of efficient, GeV-scale, 10-kHz plasma accelerators and show that
they could drive compact X-ray sources with average photon fluxes comparable to
those of third-generation light source but with significantly improved temporal
resolution. Likewise FEL operation could be driven with comparable peak power
but with significantly larger repetition rates than extant FELs
Potential mechanical loss mechanisms in bulk materials for future gravitational wave detectors
Low mechanical loss materials are needed to further decrease thermal noise in
upcoming gravitational wave detectors. We present an analysis of the
contribution of Akhieser and thermoelastic damping on the experimental results
of resonant mechanical loss measurements. The combination of both processes
allows the fit of the experimental data of quartz in the low temperature region
(10 K to 25 K). A fully anisotropic numerical calculation over a wide
temperature range (10 K to 300 K) reveals, that thermoelastic damping is not a
dominant noise source in bulk silicon samples. The anisotropic numerical
calculation is sucessfully applied to the estimate of thermoelastic noise of an
advanced LIGO sized silicon test mass.Comment: 7 pages, 3 figures, submitted to Journal of Physics: Conference
Series (AMALDI8
Multipole nonlinearity of metamaterials
We report on the linear and nonlinear optical response of metamaterials
evoked by first and second order multipoles. The analytical ground on which our
approach bases permits for new insights into the functionality of
metamaterials. For the sake of clarity we focus here on a key geometry, namely
the split-ring resonator, although the introduced formalism can be applied to
arbitrary structures. We derive the equations that describe linear and
nonlinear light propagation where special emphasis is put on second harmonic
generation. This contribution basically aims at stretching versatile and
existing concepts to describe light propagation in nonlinear media towards the
realm of metamaterials.Comment: 7 pages, 3 figure
Point-by-point inscription of apodized fiber Bragg gratings
We demonstrate apodized fiber Bragg gratings inscribed with a point-by-point
technique. We tailor the grating phase and coupling amplitude through precise
control over the longitudinal and transverse position of each laser-inscribed
modification. This method of apodization is facilitated by the
highly-localized, high-contrast modifications generated by focussed IR
femtosecond laser inscription. Our technique provides a simple method for the
design and implementation of point-by-point fiber Bragg gratings with complex
apodization profiles.Comment: 6 pages, 4 figures, article in revie
Contribution of the magnetic resonance to the third harmonic generation from a fishnet metamaterial
We investigate experimentally and theoretically the third harmonic generated
by a double-layer fishnet metamaterial. To unambiguously disclose most notably
the influence of the magnetic resonance, the generated third harmonic was
measured as a function of the angle of incidence. It is shown experimentally
and numerically that when the magnetic resonance is excited by pump beam, the
angular dependence of the third harmonic signal has a local maximum at an
incidence angle of {\theta} \simeq 20{\deg}. This maximum is shown to be a
fingerprint of the antisymmetric distribution of currents in the gold layers.
An analytical model based on the nonlinear dynamics of the electrons inside the
gold shows excellent agreement with experimental and numerical results. This
clearly indicates the difference in the third harmonic angular pattern at
electric and magnetic resonances of the metamaterial.Comment: 7 pages, 5 figure
Real-time and Sub-wavelength Ultrafast Coherent Diffraction Imaging in the Extreme Ultraviolet
Coherent Diffraction Imaging is a technique to study matter with nanometer-scale spatial resolution based on coherent illumination of the sample with hard X-ray, soft X-ray or extreme ultraviolet light delivered from synchrotrons or more recently X-ray Free-Electron Lasers. This robust technique simultaneously allows quantitative amplitude and phase contrast imaging. Laser-driven high harmonic generation XUV-sources allow table-top realizations. However, the low conversion efficiency of lab-based sources imposes either a large scale laser system or long exposure times, preventing many applications. Here we present a lensless imaging experiment combining a high numerical aperture (NA=0.8) setup with a high average power fibre laser driven high harmonic source. The high flux and narrow-band harmonic line at 33.2 nm enables either sub-wavelength spatial resolution close to the Abbe limit (Delta r=0.8 lambda) for long exposure time, or sub-70 nm imaging in less than one second. The unprecedented high spatial resolution, compactness of the setup together with the real-time capability paves the way for a plethora of applications in fundamental and life sciences
Cladding mode coupling in highly localized fiber Bragg gratings: modal properties and transmission spectra
The spectral characteristics of a fiber Bragg grating (FBG) with a
transversely inhomogeneous refractive index profile, differs con- siderably
from that of a transversely uniform one. Transmission spectra of inhomogeneous
and asymmetric FBGs that have been inscribed with focused ultrashort pulses
with the so-called point-by-point technique are investigated. The cladding mode
resonances of such FBGs can span a full octave in the spectrum and are very
pronounced (deeper than 20dB). Using a coupled-mode approach, we compute the
strength of resonant coupling and find that coupling into cladding modes of
higher azimuthal order is very sensitive to the position of the modification in
the core. Exploiting these properties allows precise control of such
reflections and may lead to many new sensing applications.Comment: Submission to OE, 16 pages, 6 figure
- …