Thomson scattering from a shock front

We have obtained a Thomson scattering spectrum in the collective regime by scattering a probe beam from a shock front, in an experiment conducted at the Omega laser at the Laboratory for Laser Energetics. The probe beam was created by frequency converting a beamline at Omega to a 2 ns2ns pulse of 0.263 μm0.263μm light, focused with a dedicated optical focusing system. The diagnostic system included collecting optics, spectrometer, and streak camera, with a scattering angle of 101°. The target included a primary shock tube, a 20-μm20-μm-thick beryllium drive disk, 0.3-μm0.3-μm-thick polyimide windows mounted on a secondary tube, and a gas fill tube. Detected acoustic waves propagated parallel to the target axis. Ten laser beams irradiated the beryllium disk with 0.351 μm0.351μm light at 5×1014 W/cm25×1014W∕cm2 for 1 ns1ns starting at toto, driving a strong shock through argon gas at ρo = 1 mg/ccρo=1mg∕cc. The 200 J200J probe beam fired at t = 19 nst=19ns for 2 ns2ns, and at t = 20.1 nst=20.1ns a 0.3 ns0.3ns signal was detected. We attribute this signal to scattering from the shocked argon, before the density increased above critical due to radiative collapse.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/87893/2/10E504_1.pd

Examination of Scattering Volume Aligment in Thomson Scattering Off of a Shock Front in Argon

Thomson scattering in argon gas successfully probed the region of plasma just behind the shock front. The instantaneous shock velocity can be inferred from the duration of the signal, taking into account the size and shape of the scattering volume. Possible misalignment of the probe beam and spectrometer slits greatly affects the size and shape of the scattering volume, and therefore affects the calculation of the instantaneous shock velocity

Counter-propagating radiative shock experiments on the Orion laser and the formation of radiative precursors

We present results from new experiments to study the dynamics of radiative shocks, reverse shocks and radiative precursors. Laser ablation of a solid piston by the Orion high-power laser at AWE Aldermaston UK was used to drive radiative shocks into a gas cell initially pressurised between $0.1$ and $1.0 \ bar with different noble gases. Shocks propagated at {80 \pm 10 \ km/s} and experienced strong radiative cooling resulting in post-shock compressions of { \times 25 \pm 2}. A combination of X-ray backlighting, optical self-emission streak imaging and interferometry (multi-frame and streak imaging) were used to simultaneously study both the shock front and the radiative precursor. These experiments present a new configuration to produce counter-propagating radiative shocks, allowing for the study of reverse shocks and providing a unique platform for numerical validation. In addition, the radiative shocks were able to expand freely into a large gas volume without being confined by the walls of the gas cell. This allows for 3-D effects of the shocks to be studied which, in principle, could lead to a more direct comparison to astrophysical phenomena. By maintaining a constant mass density between different gas fills the shocks evolved with similar hydrodynamics but the radiative precursor was found to extend significantly further in higher atomic number gases (\sim$$4$ times further in xenon than neon). Finally, 1-D and 2-D radiative-hydrodynamic simulations are presented showing good agreement with the experimental data.Comment: HEDLA 2016 conference proceeding

Observation of collapsing radiative shocks in laboratory experiments

This article reports the observation of the dense, collapsed layer produced by a radiative shock in a laboratory experiment. The experiment uses laser irradiation to accelerate a thin layer of solid-density material to above 100 km/s100km∕s, the first to probe such high velocities in a radiative shock. The layer in turn drives a shock wave through a cylindrical volume of Xe gas (at ∼ 6 mg/cm3∼6mg∕cm3). Radiation from the shocked Xe removes enough energy that the shocked layer increases in density and collapses spatially. This type of system is relevant to a number of astrophysical contexts, providing the potential to observe phenomena of interest to astrophysics and to test astrophysical computer codes.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/87760/2/082901_1.pd

Human Female Genital Tract Infection by the Obligate Intracellular Bacterium Chlamydia trachomatis Elicits Robust Type 2 Immunity

While Chlamydia trachomatis infections are frequently asymptomatic, mechanisms that regulate host response to this intracellular Gram-negative bacterium remain undefined. This investigation thus used peripheral blood mononuclear cells and endometrial tissue from women with or without Chlamydia genital tract infection to better define this response. Initial genome-wide microarray analysis revealed highly elevated expression of matrix metalloproteinase 10 and other molecules characteristic of Type 2 immunity (e.g., fibrosis and wound repair) in Chlamydia-infected tissue. This result was corroborated in flow cytometry and immunohistochemistry studies that showed extant upper genital tract Chlamydia infection was associated with increased co-expression of CD200 receptor and CD206 (markers of alternative macrophage activation) by endometrial macrophages as well as increased expression of GATA-3 (the transcription factor regulating TH2 differentiation) by endometrial CD4+ T cells. Also among women with genital tract Chlamydia infection, peripheral CD3+ CD4+ and CD3+ CD4- cells that proliferated in response to ex vivo stimulation with inactivated chlamydial antigen secreted significantly more interleukin (IL)-4 than tumor necrosis factor, interferon-γ, or IL-17; findings that repeated in T cells isolated from these same women 1 and 4 months after infection had been eradicated. Our results thus newly reveal that genital infection by an obligate intracellular bacterium induces polarization towards Type 2 immunity, including Chlamydia-specific TH2 development. Based on these findings, we now speculate that Type 2 immunity was selected by evolution as the host response to C. trachomatis in the human female genital tract to control infection and minimize immunopathological damage to vital reproductive structures. © 2013 Vicetti Miguel et al

On the magnetic fields generated by experimental dynamos

We review the results obtained by three successful fluid dynamo experiments and discuss what has been learnt from them about the effect of turbulence on the dynamo threshold and saturation. We then discuss several questions that are still open and propose experiments that could be performed to answer some of them.Comment: 40 pages, 13 figure

Demonstartion of density dependence of x-ray flux in a laser-driven hohlraum

Experiments have been conducted using laser-driven cylindrical hohlraums whose walls are machined from Ta{sub 2}O{sub 5} foams of 100 mg/cc and 4 g/cc densities. Measurements of the radiation temperature demonstrate that the lower density walls produce higher radiation temperatures than the high density walls. This is the first experimental demonstration of the prediction that this would occur [M. D. Rosen and J. H. Hammer, Phys. Rev. E 72, 056403 (2005)]. For high density walls, the radiation front propagates subsonically, and part of the absorbed energy is wasted by the flow kinetic energy. For the lower wall density, the front velocity is supersonic and can devote almost all of the absorbed energy to heating the wall

Towards an automated masking process: A model-based approach

The masking of aircraft engine parts, such as turbine blades, is a major bottleneck for the aerospace industry. The process is often carried out manually in multiple stages of coating and curing, which requires extensive time and introduces variations in the masking quality. This article investigates the automation of the masking process utilising the well-established time–pressure dispensing process for controlled maskant dispensing and a robotic manipulator for accurate part handling. A mathematical model for the time–pressure dispensing process was derived, extending previous models from the literature by incorporating the robot velocity for controlled masking line width. An experiment was designed, based on the theoretical analysis of the dispensing process, to derive an empirical model from the generated data that incorporate the losses that are otherwise difficult to model mathematically. The model was validated under new input conditions to demonstrate the feasibility of the proposed approach and the masking accuracy using the derived model

A framework physical map for peach, a model Rosaceae species

A genome-wide framework physical map of peach was constructed using high-information content fingerprinting (HICF) and FPC software. The resulting HICF assembly contained 2,138 contigs composed of 15,655 clones (4.3× peach genome equivalents) from two complementary bacterial artificial chromosome libraries. The total physical length of all contigs is estimated at 303 Mb or 104.5% of the peach genome. The framework physical map is anchored on the Prunus genetic reference map and integrated with the peach transcriptome map. The physical length of anchored contigs is estimated at 45.0 Mb or 15.5% of the genome. Altogether, 2,636 markers, i.e., genetic markers, peach unigene expressed sequence tags, and gene-specific and overgo probes, were incorporated into the physical framework and supported the accuracy of contig assembly.This project was supported by the United States Department of Agriculture NRI Award # 2005-35300-15452.Peer reviewe