The Injection System of the INFN-SuperB Factory Project: Preliminary Design

THPEA007International audienceThe ultra high luminosity B-factory (SuperB) project of INFN requires a high performance and reliable injection system, providing electrons at 4 GeV and positrons at 7 GeV, to fulfill the very tight requirements of the collider. Due to the short beam lifetime, continuous injection of electrons and positrons in both HER and LER rings is necessary to keep the average luminosity at a high level. Polarized electrons are required for experiments and must be delivered by the injection system, due to the beam lifetime shorter than the polarization build-up: they will be produced by means of a SLAC-SLC polarized gun. One or two 1 GeV damping rings are used to reduce e+ and e- emittances. Two schemes for positron production are under study, one with electron-positron conversion at low energy (<1 Gev), the second at 6 GeV with a recirculation line to bring the positrons back to the damping ring. Acceleration through the Linac is provided by a S-band RF system made of traveling wave, room temperature accelerating structures. An option to use the C-band technology is also presented

INTEGRATING THE BeppoSAX GAMMA-RAY BURST MONITOR INTO THE THIRD INTERPLANETARY NETWORK

We have added the BeppoSAX Gamma-Ray Burst Monitor to the third Interplanetary Network (IPN3) of burst detectors. We analyze 16 bursts whose positions are known to good accuracy from mea- surements at other wavelengths. We show that there is excellent agreement between the Ulysses/ BeppoSAX triangulation annuli and the known positions of these events and that these annuli can in many cases provide useful constraints on the positions of bursts detected by the BeppoSAX Wide-Field Camera and Narrow-Field Instruments. Subject heading: gamma rays: burst

A study of the prompt and afterglow emission of the Short GRB 061201

Our knowledge of the intrinsic properties of short duration Gamma-Ray Bursts has relied, so far, only upon a few cases for which the estimate of the distance and an extended, multiwavelength monitoring of the afterglow have been obtained. We carried out multiwavelength observations of the short GRB 061201 aimed at estimating its distance and studying its properties. We performed a spectral and timing analysis of the prompt and afterglow emission and discuss the results in the context of the standard fireball model. A clear temporal break was observed in the X-ray light curve about 40 minutes after the burst trigger. We find that the spectral and timing behaviour of the X-ray afterglow is consistent with a jet origin of the observed break, although the optical data can not definitively confirm this and other scenarios are possible. No underlying host galaxy down to R~26 mag was found after fading of the optical afterglow. Thus, no secure redshift could be measured for this burst. The nearest galaxy is at z=0.111 and shows evidence of star formation activity. We discuss the association of GRB 061201 with this galaxy and with the ACO S 995 galaxy cluster, from which the source is at an angular distance of 17'' and 8.5', respectively. We also test the association with a possible undetected, positionally consistent galaxy at z~1. In all these cases, in the jet interpretation, we find a jet opening angle of 1-2 degrees.Comment: 10 pages, 7 figures, accepted for publication in A&

Integrating the BeppoSAX Gamma-Ray Burst Monitor into the 3rd Interplanetary Network

We have added the BeppoSAX Gamma-Ray Burst Monitor to the 3rd Interplanetary Network of burst detectors. We analyze 16 bursts whose positions are known to good accuracy from measurements at other wavelengths. We show that there is excellent agreement between the Ulysses/BeppoSAX triangulation annuli and the known positions of these events, and that these annuli can in many cases provide useful constraints on the positions of bursts detected by the BeppoSAX Wide Field Camera and Narrow Field Instruments.Comment: 16 pages, 18 figures, submitted to the Astrophysical Journa

Status of the Super-B factory Design

The SuperB international team continues to optimize the design of an electron-positron collider, which will allow the enhanced study of the origins of flavor physics. The project combines the best features of a linear collider (high single-collision luminosity) and a storage-ring collider (high repetition rate), bringing together all accelerator physics aspects to make a very high luminosity of 10$^{36}$ cm$^{-2}$ sec$^{-1}$. This asymmetric-energy collider with a polarized electron beam will produce hundreds of millions of B-mesons at the $\Upsilon$(4S) resonance. The present design is based on extremely low emittance beams colliding at a large Piwinski angle to allow very low $\beta_y^\star$ without the need for ultra short bunches. Use of crab-waist sextupoles will enhance the luminosity, suppressing dangerous resonances and allowing for a higher beam-beam parameter. The project has flexible beam parameters, improved dynamic aperture, and spin-rotators in the Low Energy Ring for longitudinal polarization of the electron beam at the Interaction Point. Optimized for best colliding-beam performance, the facility may also provide high-brightness photon beams for synchrotron radiation applications

Baseline Design of the SuperB Factory Injection System

TUPPR088International audienceThe injection complex of the SuperB, B-factory project of INFN consists of a polarized electron gun, a positron production system, electron and positron linac sections, a positron damping ring and the transfer lines connecting these systems and the collider main rings. To keep the ultra high luminosity nearly constant, continuous injection of 4 GeV electrons and 7 GeV positrons in both Low Energy Ring (LER) and High Energy Ring (HER) is necessary. In this paper we describe the baseline design and the beam dynamics studies performed to evaluate the system performance

Proposal for taking data with the KLOE-2 detector at the DAΦ\PhiNE collider upgraded in energy

This document reviews the physics program of the KLOE-2 detector at DA$\Phi$NE upgraded in energy and provides a simple solution to run the collider above the $\phi$-peak (up to 2, possibly 2.5 GeV). It is shown how a precise measurement of the multihadronic cross section in the energy region up to 2 (possibly 2.5) GeV would have a major impact on the tests of the Standard Model through a precise determination of the anomalous magnetic moment of the muon and the effective fine-structure constant at the $M_Z$ scale. With a luminosity of about $10^{32}$cm$^{-2}$s$^{-1}$, DA$\Phi$NE upgraded in energy can perform a scan in the region from 1 to 2.5 GeV in one year by collecting an integrated luminosity of 20 pb$^{-1}$ (corresponding to a few days of data taking) for single point, assuming an energy step of 25 MeV. A few years of data taking in this region would provide important tests of QCD and effective theories by $\gamma\gamma$ physics with open thresholds for pseudo-scalar (like the $\eta'$), scalar ($f_0,f'_0$, etc...) and axial-vector ($a_1$, etc...) mesons; vector-mesons spectroscopy and baryon form factors; tests of CVC and searches for exotics. In the final part of the document a technical solution for the energy upgrade of DA$\Phi$NE is proposed.Comment: 19 pages, 8 figure

Early emission of rising optical afterglows: The case of GRB 060904B and GRB 070420

We present the time-resolved optical emission of gamma-ray bursts GRB 060904B and GRB 070420 during their prompt and early afterglow phases. We used time resolved photometry from optical data taken by the TAROT telescope and time resolved spectroscopy at high energies from the Swift spacecraft instrument. The optical emissions of both GRBs are found to increase from the end of the prompt phase, passing to a maximum of brightness at t_{peak}=9.2 min and 3.3 min for GRB 060904B and GRB 070420 respectively and then decrease. GRB 060904B presents a large optical plateau and a very large X-ray flare. We argue that the very large X-flare occurring near t_{peak} is produced by an extended internal engine activity and is only a coincidence with the optical emission. GRB 070420 observations would support this idea because there was no X-flare during the optical peak. The nature of the optical plateau of GRB 060904B is less clear and might be related to the late energy injection.Comment: 11 pages, 5 color figues, 2 b&w figures, accepted for publication by Astronomy and Astrophysic

Gastric variceal bleeding caused by an intrahepatic arterioportal fistula that formed after liver biopsy: a case report and review of the literature

An intrahepatic arterioportal fistula is a rare cause of portal hypertension and variceal bleeding. We report on a patient with an intrahepatic arterioportal fistula following liver biopsy who was successfully treated by hepatectomy after unsuccessful arterial embolization. We also review the literature on symptomatic intrahepatic arterioportal fistulas after liver biopsy. A 48-year-old male with bleeding gastric varices and hepatitis B virus-associated liver cirrhosis was transferred to our hospital; this patient previously underwent percutaneous liver biopsies 3 and 6 years ago. Abdominal examination revealed a bruit over the liver, tenderness in the right upper quadrant, and splenomegaly. Ultrasonographic examination, computed tomography, and angiography confirmed an arterioportal fistula between the right hepatic artery and the right portal vein with portal hypertension. After admission, the patient suffered a large hematemesis and developed shock. He was treated with emergency transarterial embolization using microcoils. Since some collateral vessels bypassed the obstructive coils and still fed the fistulous area, embolization was performed again. Despite the second embolization, the collateral vessels could not be completely controlled. Radical treatment involving resection of his right hepatic lobe was performed. For nearly 6 years postoperatively, this patient has had no further episodes of variceal bleeding

SuperB: next-generation e+e- B-factory collider

International audienceThe SuperB international team continues to optimize the design of an electron-positron collider, which will allow the enhanced study of the origins of flavor physics. The project combines the best features of a linear collider (high single- collision luminosity) and a storage-ring collider (high rep- etition rate), bringing together all accelerator physics as- pects to make a very high luminosity of 10^36 cm^−2 sec^−1 . This asymmetric-energy collider with a polarized electron beam will produce hundreds of millions of B-mesons at the Υ(4S) resonance. The present design is based on ex- tremely low emittance beams colliding at a large Piwin- ski angle to allow very low β⋆y without the need for ultra short bunches. Use of crab-waist sextupoles will enhance the luminosity, suppressing dangerous resonances and al- lowing for a higher beam-beam parameter. The project has flexible beam parameters, improved dynamic aperture, and spin-rotators in the Low Energy Ring for longitudinal po- larization of the electron beam at the Interaction Point. Op- timized for best colliding-beam performance, the facility may also provide high-brightness photon beams for syn- chrotron radiation applications