768 research outputs found
Initial test results using the GEOS-3 engineering model altimeter
Data from a series of experimental tests run on the engineering model of the GEOS 3 radar altimeter using the Test and Measurement System (TAMS) designed for preflight testing of the radar altimeter are presented. These tests were conducted as a means of preparing and checking out a detailed test procedure to be used in running similar tests on the GEOS 3 protoflight model altimeter systems. The test procedures and results are also included
Influence of music genre and composition on entertainment noise limits
Liquor licensing authorities across Australia typically require an entertainment noise test to be conducted before a venue can host amplified entertainment. The purpose of this test is to simulate live entertainment in order to determine the maximum permissible noise source limits allowed for the venue. In this paper, several disadvantages of the current method used for entertainment noise testing are identified and discussed. It was found that the choice of music can affect the resulting source noise level limits. An alternative approach has been suggested which involves playing band-limited pink noise across the 63 to 2kHz octave bands. A correction is then applied to determine the source noise level limits associated with different genres of music. The advantages of this method are that it reduces the time required to conduct the test, the nuisance caused to neighbouring premises is reduced and the variance in source noise level limits caused by different choice of test music is eliminated
Recommended from our members
Thermophysical Properties of the North Polar Residual Cap using Mars Global Surveyor Thermal Emission Spectrometer
Using derived temperatures from thermal-infrared instruments aboard orbiting spacecraft, we constrain the thermophysical properties, in the upper few meters, of the north polar residual cap of Mars. In line with previous authors we test a homogeneous thermal model (i.e., depth-independent thermal properties), simulating water ice of varying porosity against observed temperatures. We find that high thermal inertia (>1,000Jm(-2)K(-1)s(1/2) or 40% porosity) that densifies with depth into a zero-porosity ice layer at shallow depths (<0.5m). We interpret this as evidence of recent water ice accumulation. Our results along the edge of the residual cap imply that denser (<40% porosity) ice is present at the surface and coincides with lower albedo. These results suggest that older ice is undergoing exhumation along much of the residual cap margin. The results support recent water ice accumulation having occurred over specific regions, while ablation dominates in others. Plain Language Summary The polar regions of Mars host kilometer-thick stacks of water ice that have been built up over millions of years. At the north pole today, the top of this ice deposit is interacting with the Martian atmosphere. Whether or not ice at the surface is fluffy (like snow) or dense (like an ice slab) can provide useful information about the polar ice cap and recent climate. Multiple years of surface temperature measurements have been acquired by instruments aboard spacecraft in orbit around Mars. By comparing these values with temperature simulations, we can narrow down the type of ice near the surface. Our results show that the type of ice varies across the polar cap. Some regions appear to be a snow-like surface where the polar cap may be growing. Other regions, most notably along the edge of the polar cap, show denser ice that is likely older. The nature of the ice tells us about the current climate and how these kilometer-thick ice deposits form.Mars Data Analysis Program [NNX15AM62G]6 month embargo; first published: 09 April 2019This item from the UA Faculty Publications collection is made available by the University of Arizona with support from the University of Arizona Libraries. If you have questions, please contact us at [email protected]
Energy spectra and photoluminescence of charged magneto-excitons
Charged magneto-excitons X- in a dilute 2D electron gas in narrow and
symmetric quantum wells are studied using exact diagonalization techniques. An
excited triplet X- state with a binding energy of about 1 meV is found. This
state and the singlet are the two optically active states observed in
photoluminescence (PL). The interaction of X-'s with electrons is shown to have
short range, which effectively isolates bound X- states from a dilute e-h
plasma. This results in the insensitivity of PL to the filling factor nu. For
the "dark" triplet X- ground state, the oscillator strength decreases
exponentially as a function of 1/nu which explains why it is not seen in PL.Comment: 3 pages, 4 figures, submitted to Physica
Stage, grade and morphology of tumours of the colon and rectum recorded in the Oxford Cancer Registry, 1995–2003
Data on stage, grade and morphology of 12 761 colorectal cancers registered between 1995 and 2003 by Oxford Cancer Registry are reviewed. Dukes stage is recorded for 81% of colon cancers and for 69% of rectal cancers. Incomplete registry data and changing recording practices may affect future evaluation of bowel cancer screening
Constraints on the Recent Rate of Lunar Regolith Accumulation from Diviner Observations
Many large craters on the lunar nearside show radar CPR signatures consistent with the presence of blocky ejecta blankets, to distances pre dicted to be covered by continuous ejecta. However, most of these sur faces show limited enhancements in both derived rock abundance and rock-free regolith temperatures calculated from Diviner nighttime infrar ed observations. This indicates that the surface rocks are covered by a layer of thermally insulating regolith material. By matching the results of one-dimensional thermal models to Diviner nighttime temperat ures, we have constrained the thermophysical properties of the upper regolith, and the thickness of regolith overlying proximal ejecta. We find that for all of the regions surveyed (all in the nearside highla nds), the nighttime cooling curves are best fit by a density profile that varies exponentially with depth, consistent with a linear mixture of rocks and regolith fines, with increasing rock content with depth . Our results show significant spatial variations in the density e-folding depth, H, among young crater ejecta regions, indicating differen ces in the thickness of accumulated regolith. However, away from youn g craters, the average regional "equilibrium" value of H (Heq) is remarkably consistent, and is on the order of 5 cm. As expected, near-rim ejecta associated with young craters show lower values of H, indicating a high rock content in the shallow subsurface; for older craters, the average value of H approaches the regional value of Heq. Calculat ed H values for young craters show a clear correlation with published ages, providing the first observational constraint on the recent rate of lunar regolith accumulation. In addition, this result may help to resolve the apparent discrepancy between ages calculated from small crater counts on melt ponds versus counts on continuous ejecta (e.g., King crater; Ashley et al., 2011, LPSC 42, abstract 2437). This method could, in principle, be extended to other airless bodies (e.g., aste roids), which would in turn constrain the recent impactor flux
Electron-beam propagation in a two-dimensional electron gas
A quantum mechanical model based on a Green's function approach has been used
to calculate the transmission probability of electrons traversing a
two-dimensional electron gas injected and detected via mode-selective quantum
point contacts. Two-dimensional scattering potentials, back-scattering, and
temperature effects were included in order to compare the calculated results
with experimentally observed interference patterns. The results yield detailed
information about the distribution, size, and the energetic height of the
scattering potentials.Comment: 7 pages, 6 figure
GaSb quantum rings in GaAs/AlxGa1−xAs quantum wells
We report the results of continuous and time-resolved photoluminescence measurements on type-II GaSb quantum rings embedded within GaAs/AlxGa1-xAs quantum wells. A range of samples were grown with different well widths, compensation-doping concentrations within the wells, and number of quantum-ring layers. We find that each of these variants have no discernible effect on the radiative recombination, except for the very narrowest (5 nm) quantum well. In contrast, singleparticle numerical simulations of the sample predict changes in photoluminescence energy of up to 200 meV. This remarkable difference is explained by the strong Coulomb binding of electrons to rings that are multiply charged with holes. The resilience of the emission to compensation doping indicates that multiple hole occupancy of the quantum rings is required for efficient carrier recombination, regardless of whether these holes come from doping or excitation
Probing the potential landscape inside a two-dimensional electron-gas
We report direct observations of the scattering potentials in a
two-dimensional electron-gas using electron-beam diffaction-experiments. The
diffracting objects are local density-fluctuations caused by the spatial and
charge-state distribution of the donors in the GaAs-(Al,Ga)As heterostructures.
The scatterers can be manipulated externally by sample illumination, or by
cooling the sample down under depleted conditions.Comment: 4 pages, 4 figure
Room-temperature Operation of Low-voltage, Non-volatile, Compound-semiconductor Memory Cells
Whilst the different forms of conventional (charge-based) memories are well suited to their individual
roles in computers and other electronic devices, flaws in their properties mean that intensive research
into alternative, or emerging, memories continues. In particular, the goal of simultaneously achieving
the contradictory requirements of non-volatility and fast, low-voltage (low-energy) switching
has proved challenging. Here, we report an oxide-free, floating-gate memory cell based on III-V
semiconductor heterostructures with a junctionless channel and non-destructive read of the stored
data. Non-volatile data retention of at least 104 s in combination with switching at ≤2.6 V is achieved
by use of the extraordinary 2.1 eV conduction band offsets of InAs/AlSb and a triple-barrier resonant
tunnelling structure. The combination of low-voltage operation and small capacitance implies intrinsic
switching energy per unit area that is 100 and 1000 times smaller than dynamic random access
memory and Flash respectively. The device may thus be considered as a new emerging memory with
considerable potential
- …