Estudio experimental del Sistema de Albañilería Integral en la construcción de viviendas sismorresistentes. Experimental study of the Integral Masonry System in the construction of earthquake resistant houses

This paper presents the application of the Integral Masonry System (IMS) to the construction of earthquake resistant houses and its experimental study. To verify the security of this new type of building in seismic areas of the third world two prototypes have been tested, one with adobe and the other with hollow brick. In both cases it’s a two-story 6x6x6 m3 house built to scale 1/2. The tests are carried out at the Laboratory of Antiseismic Structures of the Department of Engineering, Pontifical Catholic University of Peru in Lima, in collaboration with the UPM (Technical University of Madrid). This article shows the design process of the prototypes to test, including the sizing of the reinforcements, the characteristics of the tests and the results obtained. These results show that the IMS with adobe or brick remains stable with no significant cracks faced with a severe earthquake, with an estimated acceleration of 1.8 g. Este artículo presenta una aplicación del Sistema de Albañilería Integral (SAI) a la construcción de viviendas sismorresistentes y su estudio experimental. Para verificar su seguridad para su construcción en zonas sísmicas del tercer mundo se han ensayado dos prototipos, uno con adobe, y otro con ladrillo hueco. Se trata de una vivienda de 6x6x6 m3 y dos plantas que se construyen a escala 1/2. Los ensayos se realizaron en el Laboratorio de Estructuras Antisísmicas del Departamento de Ingeniería de la Pontificia Católica Universidad del Perú (PUCP) de Lima en colaboración con la UPM (Universidad Politécnica de Madrid). Este artículo muestra el proceso de diseño de los prototipos a ensayar, incluido el dimensionado de los refuerzos, las características de los ensayos y los resultados obtenidos. Estos resultados muestran que el SAI con adobe o ladrillo permanece estable sin grietas significativas ante un sismo severo, con una aceleración estimada de 1,8 g

Formation of Epitaxial MnBi Layers on (Ga,Mn)As

The initial growth of MnBi on MnAs terminated (GaMn)As is studied by means of synchrotron based photoelectron spectroscopy. From analysis of surface core level shifts we conclude that a continued epitaxial MnBi layer is formed, in which the MnAs/MnBi interface occurs between As and Bi atomic planes. The well defined 1x2 surface reconstruction of the MnAs surface in preserved for up to 2 ML of MnBi before clear surface degradation occurs.Comment: 18 pages, 5 figure

Influence of annealing parameters on the ferromagnetic properties of optimally passivated (Ga,Mn)As epilayers

The influence of annealing parameters - temperature and time - on the magnetic properties of As-capped (Ga,Mn)As epitaxial thin films have been investigated. The dependence of the transition temperature (Tc) on annealing time marks out two regions. The Tc peak behavior, characteristic of the first region, is more pronounced for thick samples, while for the second (`saturated') region the effect of the annealing time is more pronounced for thin samples. A right choice of the passivation medium, growth conditions along with optimal annealing parameters routinely yield Tc-values of ~ 150 K and above, regardless of the thickness of the epilayers.Comment: 5 pages, 3 figure

Aproximación a la diferenciación social del espacio interior urbano en la ciudad de Murcia.

Sin resume

Post-growth annealing of GaMnAs under As capping - an alternative way to increase Tc

We demonstrate that in situ post-growth annealing of GaMnAs layers under As capping is adequate for achieving high Curie temperatures (Tc) in a similar way as ex situ annealing in air or in N2 atmosphere practiced earlier.Comment: 13 pages, 4 figure

Generalized Jacobi–Weierstrass operators and Jacobi expansions

We present a realization for some K-functionals associated with Jacobi expansions in terms of generalized Jacobi–Weierstrass operators. Fractional powers of the operators as well as results concerning simultaneous approximation and Nikolskii–Stechkin type inequalities are also considered

Sistema de autoconstrucción sismorresistente: características resistentes y proceso constructivo

The dwelling construction with soil, adobe or brick without call for technical advice is very typical in countries in process of development that are in areas of high seismic risk. To give an answer to the problem of earthquake building using these materials, providing simplicity of construction, we have worked for years in the use of the Integral Masonry System (IMS). The IMS is a system that, used combined with native materials, has earthquake resistant properties and its ease of implementation makes it suitable for self-build earthquake-resistant dwellings. This article describes the IMS, develops the constructive process applied to a type of two storey houses, and shows the seismic behaviour by means of the results obtained in the three test campaigns. The originality of the system lies in the use of a single type of prefabricated trusses, intertwined in the three spatial directions allowing create a dimensional mesh.<br><br>La autoconstrucción con tierra, adobe o ladrillo es muy habitual en los países en vías de desarrollo que están en zonas de alto riesgo sísmico. Ante la necesidad de dar respuesta al problema, aportando sencillez constructiva, hemos trabajado desde hace años en el empleo del Sistema de Albañilería Integral (SAI). El SAI es un sistema que, combinado con materiales autóctonos, aporta resistencia sísmica y su facilidad de ejecución lo hace adecuado para la autoconstrucción de viviendas antisísmicas. Este artículo describe el SAI, desarrolla el proceso constructivo aplicado a una vivienda tipo de dos alturas y muestra su comportamiento sismo-resistente mediante los resultados obtenidos en tres campañas de ensayos. La originalidad del sistema radica en el empleo de un solo tipo de armaduras prefabricadas en forma de cercha que se entrelazan entre si en las tres direcciones del espacio permitiendo crear una malla tridimensional