Architecture and controls of thick, intensely bioturbated, storm-influenced shallow-marine successions

Thick (100 m), highly bioturbated storm-influenced shallow-marine deposits are not common in the stratigraphic record, but some examples have been described in aggradational to retrogradational successions. In these, individual event beds have typically low preservation potential, yet shoreface-offshore depositional settings are still largely characterized based on the inferred frequency or magnitude of storms. Here we present a sedimentological study of a thick, bioturbated exhumed succession deposited during the early post-rift phase of the Neuquen Basin (Argentina). We characterize it and compare its stratigraphic record with examples elsewhere, in order to discuss the potential factors controlling the total overprint of storm-event beds during several million years.Fil: Poyatos Moré, Miquel. University of Oslo; NoruegaFil: Schwarz, Ernesto. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Centro de Investigaciones Geológicas. Universidad Nacional de La Plata. Facultad de Ciencias Naturales y Museo. Centro de Investigaciones Geológicas; ArgentinaFil: Boya, Salvador. Universidad de Barcelona; EspañaFil: Gomis Cartesio, Luz Elema. Equinor S. A.; NoruegaFil: Midtkandal, Ivar. University of Oslo; Noruega59th British Sedimentological Research Group Annual General MeetingReino UnidoBritish Sedimentological Reseach GroupUniversity of Liverpoo

Regolith and Host Rock Influences on CO\u3csub\u3e2\u3c/sub\u3e Leakage: Active Source Seismic Profiling Across the Little Grand Wash Fault, Utah

Understanding carbon dioxide (CO2) reservoir to surface migration is crucial to successful carbon capture and sequestration approaches; especially fault/reservoir interactions under injection pressure. Through seismic imaging, we explore regolith and shallow stratigraphy across the Little Grand Wash fault. The presence of natural CO2 seeps, travertine and tufa deposits confirm modern and ancient fault-controlled CO2 leakage. We consider this an analogue for a long-failed sequestration site. We estimate bulk porosity and fracture density for host rock, regolith, and fault zone from petrophysical relationships. When combined with existing geochemical and geological data, we characterize a 60 m wide damage zone that represents the primary surface delivery channel for CO2 originating from reservoir depths. Within this damage zone, low seismic velocities suggest sediments have formed through host rock chemical dissolution or mechanical weathering. In contrast, velocities within the adjacent host rock are consistent with low fracture density clastic rocks. We measure anomalously high seismic velocities within the fault zone along one profile that best represents a sealed (cemented/plugged) low permeability, relic flow channel. This suggests that shallow fault zone permeability varies along strike. While regional stress changes may account for decadal- to millennial-scale changes in CO2 pathways, we speculate that the total fluid pressure has locally reduced the fault\u27s minimum horizontal effective stress; thereby producing both low- and high-permeability fault segments that either block or promote fluid migration. Studying CO2 migration in this system can inform potential risks to future sequestration projects and guide monitoring efforts

Structure and flow properties of syn-rift border faults: The interplay between fault damage and fault-related chemical alteration (Dombjerg Fault, Wollaston Forland, NE Greenland)

Publisher's version, source: http://dx.doi.org/10.1016/j.jsg.2016.09.012.Structurally controlled, syn-rift, clastic depocentres are of economic interest as hydrocarbon reservoirs; understanding the structure of their bounding faults is of great relevance, e.g. in the assessment of fault-controlled hydrocarbon retention potential. Here we investigate the structure of the Dombjerg Fault Zone (Wollaston Forland, NE Greenland), a syn-rift border fault that juxtaposes syn-rift deep-water hanging-wall clastics against a footwall of crystalline basement. A series of discrete fault strands characterize the central fault zone, where discrete slip surfaces, fault rock assemblages and extreme fracturing are common. A chemical alteration zone (CAZ) of fault-related calcite cementation envelops the fault and places strong controls on the style of deformation, particularly in the hanging-wall. The hanging-wall damage zone includes faults, joints, veins and, outside the CAZ, disaggregation deformation bands. Footwall deformation includes faults, joints and veins. Our observations suggest that the CAZ formed during early-stage fault slip and imparted a mechanical control on later fault-related deformation. This study thus gives new insights to the structure of an exposed basin-bounding fault and highlights a spatiotemporal interplay between fault damage and chemical alteration, the latter of which is often underreported in fault studies. To better elucidate the structure, evolution and flow properties of faults (outcrop or subsurface), both fault damage and fault-related chemical alteration must be considered. Highlights • Faults juxtaposing syn-rift clastics against crystalline basement are investigated. • Early fault-zone diagenesis profoundly influences later fault-related deformation. • Spatiotemporal interplay between fault damage and chemical alteration. • Findings have implications for fault-bounded syn-rift reservoirs in the subsurface

Overprinted allocyclic processes by tidal resonance in an epicontinental basin: the Upper Jurassic Curtis Formation, east‐central Utah, USA

Modern, tide‐dominated and tide‐influenced coastlines are characterised by a range of environments, including deltas, estuaries, and lagoons. However, some tide‐dominated basins and related sedimentary units in the rock record, such as the semi‐enclosed, shallow, Utah‐Idaho Trough foreland basin of the Jurassic Curtis sea, do not correspond to any of these modern systems. Persistent aridity caused the characteristic severe starvation of perennial fluvial input throughout this basin, in which the informal lower, middle, and upper Curtis, as well as the underlying Entrada Sandstone, and the overlying Summerville Formation were deposited. Wave energy was efficiently dissipated by the shallow basin's elongated morphology (approximately 800x150 km), as its semi‐enclosed morphology further protected the system from significant wave impact. Consequently, the semi‐enclosed, shallow‐marine system was dominated by amplified tidal forces, resulting in a complex distribution of heterolithic deposits. Allocyclic forcing strongly impacted upon the system's intrinsic autocyclic processes as the lower Curtis was deposited. Short‐lived relative sea‐level variations, along with uplift and deformation episodes, resulted in the accumulation of three parasequences, each separated by traceable flooding and ravinement surfaces. The subsequent transgression, which defines the base of the middle Curtis, allowed for the shallow‐marine part of the system to enter into tidal resonance as a consequence of the flooded basin reaching the optimal configuration of approximately 800 km in length, corresponding to an odd multiple of the quarter of the tidal wavelength given an average minimum water depth of 20 to 25 m. This resonant system overprinted the effects of allocyclic forcing and related traceable stratigraphic surfaces. However, the contemporaneous and neighbouring coastal dune field sedimentary rocks of the Moab Member of the Curtis Formation, characterised by five stacked aeolian sequences, as well as the supratidal deposits of the Summerville Formation, lingered to record allocyclic signals, as the Curtis sea regressed. This study shows that a tide‐dominated basin can enter into tidal resonance as it reaches its optimal morphological configuration, leading to the overprinting of otherwise dominant allocyclic processes by autocyclic behaviour. It is only by considering the sedimentological relationships of neighbouring and contemporaneous depositional systems that a full understanding of the dynamic stratigraphic history of a basin alternatively dominated by autocyclic and allocyclic processes can be achieved

Sedimentary Architecture of Storm-Influenced Tidal Flat Deposits of the Upper Mulichinco Formation, Neuquén Basin, Argentina

This study reports on the Lower Cretaceous upper Mulichinco Formation in the Neuquén Basin, west-central Argentina. The studied succession comprises shallow marine strata, deposited in a mixed wave and tidal flat environment where ebb-tidal currents dominated. We describe mixed storm- and tide-influenced deposits within progradationally stacked high-frequency sequences and discuss process interaction, sediment dispersal, and preservation potential. These storm and tidal deposits mix spatially on bed, bedset, and sequence scales, suggesting multi-scale process interactions. The study investigates a 12-km-long continuous outcrop, oriented sub-parallel to the paleocoastline. The succession comprises subtidal flat and meandering tidal channel complexes, with interbedding and interfingering of storm and tidal deposits. The tidal deposits are widespread and comprise moderately sorted sandstones with bimodal paleocurrent directions, single and double mud drapes, reactivation surfaces, and inclined heterolithic stratification. Varying bimodal paleocurrent directions suggest that the paleocoastline was irregular, consisting of both protrusions and bays. Storm deposits are mainly found erosively interbedded with subtidal flat sandstones, and exhibit decimeter-thick, well-sorted hummocky and swaley cross-stratified sandstones. These storm deposits show systematic lateral variations in abundance, from dominant to absent, which are linked to subtle variations in water depth along the irregular paleocoastline. As the tidal deposits are widespread across the study area, and with no significant facies change, the varying dispersal of storm-influenced deposits is considered a product of wave refraction, with converging and diverging wave energy at interpreted positions of coastal protrusions and embayments, respectively. Consequently, the irregular paleocoastline morphology caused spatial variability in wave impact and controlled preservation of interbedded storm and tidal deposits at the coastal protrusions while facilitating complete tidal remobilization of sediments in the embayments. With no evidence for fluvial influence, ebb-tidal currents are considered as the main drivers for sediment dispersal onto the subtidal flat, through the meandering tidal channels

Control of lithosphere rheology on subduction polarity at initiation: Insights from 3D analogue modelling

International audienceA series of analogue experiments was used to explore how lateral variations in lithosphere rheology may result in a subduction polarity reversal. Lithosphere models made of sand and silicone putty were designed to represent a plate convergence setting varying laterally from continent-continent to ocean-continent. Distinct series of experiments were performed to test the effects of strength profile variations in the converging plates. The modelling outcomes categorized into models that develop with and without a subduction polarity reversal. While a subduction polarity reversal was the most prevalent experiment outcome, the results suggest that upper mantle strength is the dominant factor in determining whether a subduction polarity shift occurs, or not. A weak upper mantle layer promotes obduction of the oceanic lithosphere in the western segment of the model. In model iterations where the upper mantle of the continental lithosphere was stronger than the oceanic lithosphere, a reversal in subduction polarity from north-dipping in the east, to south-dipping in the west occurred. The experiment design was inspired by the Iberian-Eurasian plate convergence and may provide a simple regional-scale explanation to the deformation patterns along the Pyrenean and Cantabrian orogeny

Interaction of deformation bands and fractures during progressive strain in monocline - San Rafael Swell, Central Utah, USA

publishedVersio

Internal mouth‐bar variability and preservation of subordinate coastal processes in low‐accommodation proximal deltaic settings (Cretaceous Dakota Group, New Mexico, USA)

Mouth bars are the fundamental architectural elements of proximal deltaic successions. Understanding their internal architecture and complex interaction with coastal processes (fluvial, tide and wave‐dominated) is paramount to the interpretation of ancient deltaic successions. This is particularly challenging in low‐accommodation systems, because they are commonly characterized by thin, condensed and top‐truncated sections. This study analyses the exhumed Cenomanian Mesa Rica Sandstone (Dakota Group, Western Interior Seaway, USA), a fluvio‐deltaic system covering a ca 450 km depositional dip‐parallel profile. The study targets the proximal deltaic expression of the system, using 22 sedimentary logs (total of 390 m) spatially correlated within a ca 25 km2 study area at the rim of the Tucumcari Basin. Analysis of facies distributions, depositional architecture and spatial extent of stratigraphic surfaces reveals a 6–10 m thick, sharp‐based and sand‐prone deltaic package, comprising several laterally extensive (>1.4 km width) mouth bars. Composite erosional surfaces infilled with multi‐storey fluvial and marine‐influenced channel deposits (12–20 m thick, 100–250 m wide) scour locally into the deltaic package. Based on differences in sedimentary structures, bed thicknesses, occurrence of interflood beds and bioturbation indexes, four different sub‐environments within single mouth bars were distinguished. These range from mouth‐bar axis, off‐axis, fringe to distal‐fringe deposits, which reflect waning depositional energy with increasing distance from the distributary channel mouth. The interpreted mouth‐bar components also show internal variability in dominant process regime, with overall river dominance but local preservation of tide influence in the fringe and distal fringe components. Mouth‐bar deposits amalgamate to form an extensive sand‐rich sheet body throughout the study area, in which interflood mudstone to very‐fine grained sandstone beds are nearly absent. These features reflect successive coalescence of mouth bars in a low accommodation/supply (A/S) setting. These conditions promoted recurrent channel avulsion/bifurcation and thus the potential reworking of previously deposited mouth‐bar fringe and distal‐fringe sediments, where time and background processes are better recorded. Results of this study evidence internal process‐regime variability within mouth‐bar components. They also caution against the possible loss of preservation of subordinate coastal processes (e.g. tidal indicators), and consequent underestimation of the true mixed influence in low‐accommodation deltaic settings

Architecture and controls of thick, intensely bioturbated, storm-influenced shallow-marine successions: An example from the Jurassic Neuquén Basin (Argentina)

Thick (>100 m-thick), highly bioturbated storm-influenced shallow-marine deposits are not frequent in the stratigraphic record, but they tend to be common in aggradational to retrogradational successions. Individual storm-event beds have typically low preservation potential in these successions, yet depositional settings are characterized on the basis of storms processes. Here we present a sedimentological study of a thick, bioturbated exhumed succession deposited during the early post-rift stage of the Neuquén Basin (Argentina) and compare its stratigraphic record with examples worldwide, in order to discuss the potential factors controlling the total overprint of storm-event beds during several million years. The Bardas Blancas Formation being 170–220 m thick in the study area is dominated by muddy sandstones and sandy mudstones, and it also includes subordinate proportions of clean sandstones and pure mudstones, collectively representing different environments of a storm-influenced shoreface-offshore system. The offshore transition and proximal offshore strata invariably comprise intensely bioturbated deposits, with only a few preserved HCS-sandstone beds. The unit shows for most of its thickness a long-term aggradational pattern spanning 7–10 Myr and is associated with low riverine influence. By combining the observations and interpretations of the Bardas Blancas Formation with other subsurface and exhumed intensely bioturbated, shallow-marine successions, we dispute the general assumption that these are associated with low frequency or low magnitude of storms. Alternatively, we argue that the long-lived efficiency of benthic fauna on overprinting most if not all the storm-event beds that reached the offshore-transition sector, results from the combination of several factors: deposition in relatively confined marine depocentres, persistent low riverine influence, and long-term aggradational stacking pattern. As these conditions can develop in a variety of basin styles, such as rift, early post-rift, and foreland settings, the recognition of thick, bioturbated successions as the ones discussed here can be used to infer more realistic constrains for depositional models and better predict facies distribution in such storm-influenced systems

Multi-scale influence of topography on shallow-marine successions associated with long-term transgressions: from Argentinean outcrops to the Norwegian shelf subsurface

Thick shallow-marine successions associated with longterm transgressions are less well known than their thin, well-sorted counterparts, more widely studied due to their potential to form good reservoirs. In these successions, particularly in storm-dominated examples, bioturbation can obliterate primary sedimentary characteristics, making stacking patterns and sequences difficult to define, and challenging our understanding of the main controls in their resulting depositional architecture.Fil: Poyatos Moré, Miquel. University of Oslo; NoruegaFil: Schwarz, Ernesto. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Centro de Investigaciones Geológicas. Universidad Nacional de La Plata. Facultad de Ciencias Naturales y Museo. Centro de Investigaciones Geológicas; ArgentinaFil: Boya, Salvador. Universidad de Barcelona; EspañaFil: Gomis Cartesio, Luz Elena. No especifíca;Fil: Midtkandal, Ivar. University of Oslo; Noruega34th Geological Winter MeetingTrondheimNoruegaGeological Society of Norwa