336 research outputs found
Genetic and Epigenetic Regulation of Vernalization in Brassicaceae
A wide variation of morphological traits exists in Brassica rapa L. and Brassica oleracea L., and cultivated vegetable varieties of these species are consumed worldwide. Flowering time is an important agronomic trait in these species and varies among varieties or cultivars. Especially, leafy vegetable species need a high bolting resistance. Isolation of FLOWERING LOCUS C (FLC), one of the key genes involved in vernalization, has now provided an insight into the molecular mechanism involved in the regulation of flowering time, including the role of histone modification. In the model plant Arabidopsis thaliana, FLC plays an important role in modulating flowering time. The response to vernalization causes an increase in histone H3 lysine 27 tri-methylation (H3K27me3) that leads to reduced expression of the FLC gene. B. rapa and B. oleracea both contain several paralogs of FLC at syntenic regions identified as major flowering time and vernalization response quantitative trait loci (QTL). We introduce the recent research, not only in A. thaliana, but also in the genus Brassica from a genetic and epigenetic view point
Long noncoding RNAs in Brassica rapa L. following vernalization
© 2019, The Author(s). Brassica rapa L. is an important agricultural crop that requires a period of prolonged cold for flowering. This process is known as vernalization. Studies have shown that long noncoding RNAs (lncRNAs) play important roles in abiotic stress responses and several cold-responsive noncoding RNAs have been suggested to be involved in vernalization. We examined the transcriptome of the Chinese cabbage inbred line (B. rapa L. var. pekinensis) RJKB-T24, and identified 1,444 long intergenic noncoding RNAs (lincRNAs), 551 natural antisense transcripts (NATs), and 93 intronic noncoding RNAs (incRNAs); 549 of the 2,088 lncRNAs significantly altered their expression in response to four weeks of cold treatment. Most differentially expressed lncRNAs did not lead to a change of expression levels in mRNAs covering or near lncRNAs, suggesting that the transcriptional responses to four weeks of cold treatment in lncRNA and mRNA are independent. However, some differentially expressed mRNAs had NATs with expression altered in the same direction. These genes were categorized as having an abiotic stress response, suggesting that the paired-expression may play a role in the transcriptional response to vernalization or cold treatment. We also identified short-term cold treatment induced NATs in BrFLC and BrMAF genes, which are involved in vernalization. The lncRNAs we identified differed from those reported in Arabidopsis thaliana, suggesting the role of lncRNAs in vernalization differ between these two species
The histone modification H3 lysine 27 tri-methylation has conserved gene regulatory roles in the triplicated genome of Brassica rapa L
© The Author(s) 2019. Published by Oxford University Press on behalf of Kazusa DNA Research Institute. Brassica rapa L. is an important vegetable and oilseed crop. We investigated the distribution of the histone mark tri-methylation of H3K27 (H3K27me3) in B. rapa and its role in the control of gene expression at two stages of development (2-day cotyledons and 14-day leaves) and among paralogs in the triplicated genome. H3K27me3 has a similar distribution in two inbred lines, while there was variation of H3K27me3 sites between tissues. Sites that are specific to 2-day cotyledons have increased transcriptional activity, and low levels of H3K27me3 in the gene body region. In 14-day leaves, levels of H3K27me3 were associated with decreased gene expression. In the triplicated genome, H3K27me3 is associated with paralogs that have tissue-specific expression. Even though B. rapa and Arabidopsis thaliana are not closely related within the Brassicaceae, there is conservation of H3K27me3-marked sites in the two species. Both B. rapa and A. thaliana require vernalization for floral initiation with FLC being the major controlling locus. In all four BrFLC paralogs, low-temperature treatment increases H3K27me3 at the proximal nucleation site reducing BrFLC expression. Following return to normal temperature growth conditions, H3K27me3 spreads along all four BrFLC paralogs providing stable repression of the gene
Distorted wave impulse approximation analysis for spin observables in nucleon quasi-elastic scattering and enhancement of the spin-longitudinal response
We present a formalism of distorted wave impulse approximation (DWIA) for
analyzing spin observables in nucleon inelastic and charge exchange reactions
leading to the continuum. It utilizes response functions calculated by the
continuum random phase approximation (RPA), which include the effective mass,
the spreading widths and the \Delta degrees of freedom. The Fermi motion is
treated by the optimal factorization, and the non-locality of the
nucleon-nucleon t-matrix by an averaged reaction plane approximation. By using
the formalism we calculated the spin-longitudinal and the spin-transverse cross
sections, ID_q and ID_p, of 12C, 40Ca (\vec{p},\vec{n}) at 494 and 346 MeV. The
calculation reasonably reproduced the observed ID_q, which is consistent with
the predicted enhancement of the spin-longitudinal response function R_L.
However, the observed ID_p is much larger than the calculated one, which was
consistent with neither the predicted quenching nor the spin-transverse
response function R_T obtained by the (e,e') scattering. The Landau-Migdal
parameter g'_N\Delta for the N\Delta transition interaction and the effective
mass at the nuclear center m^*(r=0) are treated as adjustable parameters. The
present analysis indicates that the smaller g'_{N\Delta}(\approx 0.3) and
m^*(0) \approx 0.7 m are preferable. We also investigate the validity of the
plane wave impulse approximation (PWIA) with the effective nucleon number
approximation for the absorption, by means of which R_L and R_T have
conventionally been extracted.Comment: RevTex 3, 29 pages, 2 tables, 8 figure
The role of FRIGIDA and FLOWERING LOCUS C genes in flowering time of Brassica rapa leafy vegetables
© 2019, The Author(s). There is a wide variation of flowering time among lines of Brassica rapa L. Most B. rapa leafy (Chinese cabbage etc.) or root (turnip) vegetables require prolonged cold exposure for flowering, known as vernalization. Premature bolting caused by low temperature leads to a reduction in the yield/quality of these B. rapa vegetables. Therefore, high bolting resistance is an important breeding trait, and understanding the molecular mechanism of vernalization is necessary to achieve this goal. In this study, we demonstrated that BrFRIb functions as an activator of BrFLC in B. rapa. We showed a positive correlation between the steady state expression levels of the sum of the BrFLC paralogs and the days to flowering after four weeks of cold treatment, suggesting that this is an indicator of the vernalization requirement. We indicate that BrFLCs are repressed by the accumulation of H3K27me3 and that the spreading of H3K27me3 promotes stable FLC repression. However, there was no clear relationship between the level of H3K27me3 in the BrFLC and the vernalization requirement. We also showed that if there was a high vernalization requirement, the rate of repression of BrFLC1 expression following prolonged cold treatments was lower
Experimental determination and thermodynamic calculation of the phase equilibria in the Cu-In-Sn system
The phase equilibria of the Cu-In-Sn system were investigated by means of the diffusion couple method, differential scanning calorimetry (DSC) and metallography. The isothermal sections at 110-900 degreesC, as well as vertical sections at 10wt.%Cu-70wt.%Cu were determined. It was found that there are large solubilities of In in the epsilon (Cu3Sn), delta (Cu41Sn11), and eta phases in the Cu-Sn system, and large solubilities of Sn in the gamma, eta, and delta (Cu7In3) phases in the Cu-In system. The eta phase was found to continuously form from the Cu-In side to the Cu-Sn side, and a ternary compound (Cu2In3Sn) was found to exist at 110 degreesC. Thermodynamic assessment of the Cu-In-Sn system was also carried out based on experimental data of activity and phase equilibria using the CALPHAD method, in which the Gibbs energies of the liquid, fcc and bcc phases are described by the subregular solution model and that of compounds, including two ternary compounds, are represented by the sublattice model. The thermodynamic parameters for describing the phase equilibria were optimized, and agreement between the calculated and experimental results was obtained
Compression regulates mitotic spindle length by a mechanochemical switch at the poles
Author Posting. © The Author(s), 2009. This is the author's version of the work. It is posted here by permission of Elsevier B.V. for personal use, not for redistribution. The definitive version was published in Current Biology 19 (2009): 1086-1095, doi:10.1016/j.cub.2009.05.056.Although the molecules involved in mitosis are becoming better characterized,
we still lack an understanding of the emergent mechanical properties of the mitotic spindle. For
example, we cannot explain how spindle length is determined. To gain insight into how forces
are generated and responded to in the spindle, we developed a method to apply controlled
mechanical compression to metaphase mitotic spindles in living mammalian cells, while
monitoring microtubules and kinetochores by fluorescence microscopy.
Compression caused reversible spindle widening and lengthening to a new steadystate.
Widening was a passive mechanical response, and lengthening an active mechanochemical
process requiring microtubule polymerization but not kinesin-5 activity. Spindle morphology
during lengthening and drug perturbations suggested that kinetochore fibers are pushed outwards
by pole-directed forces generated within the spindle. Lengthening of kinetochore fibers occurred
by inhibition of microtubule depolymerization at poles, with no change in sliding velocity, interkinetochore
stretching, or kinetochore dynamics.
We propose that spindle length is controlled by a mechanochemical switch at the
poles that regulates the depolymerization rate of kinetochore-fibers in response to compression,
and discuss models for how this switch is controlled. Poleward force appears to be exerted along
kinetochore fibers by some mechanism other than kinesin-5 activity, and we speculate that it
may arise from polymerization pressure from growing plus-ends of interpolar microtubules
whose minus-ends are anchored in the fiber. These insights provide a framework for
conceptualizing mechanical integration within the spindle.S.D. received support from a Milton Fund (Harvard University)
and T.J.M. was supported by NIH grants GM039565 and P50 GM068763
Directly probing the mechanical properties of the spindle and its matrix
© The Authors, 2010. This article is distributed under the terms of the Creative Commons Attribution-Noncommercial-Share Alike 3.0 Unported License. The definitive version was published in Journal of Cell Biology 188 (2010): 481-489, doi:10.1083/jcb.200907110.Several recent models for spindle length regulation propose an elastic pole to pole spindle matrix that is sufficiently strong to bear or antagonize forces generated by microtubules and microtubule motors. We tested this hypothesis using microneedles to skewer metaphase spindles in Xenopus laevis egg extracts. Microneedle tips inserted into a spindle just outside the metaphase plate resulted in spindle movement along the interpolar axis at a velocity slightly slower than microtubule poleward flux, bringing the nearest pole toward the needle. Spindle velocity decreased near the pole, which often split apart slowly, eventually letting the spindle move completely off the needle. When two needles were inserted on either side of the metaphase plate and rapidly moved apart, there was minimal spindle deformation until they reached the poles. In contrast, needle separation in the equatorial direction rapidly increased spindle width as constant length spindle fibers pulled the poles together. These observations indicate that an isotropic spindle matrix does not make a significant mechanical contribution to metaphase spindle length determination.This work was supported by National Institute of General Medicine
grants to J.C. Gatlin (F32GM080049) and E.D. Salmon (GM24364).
T.J. Mitchison was funded by a grant from the National Cancer Institute
(CA078048-09)
Retinoic acid directly stimulates osteoclastic bone resorption and gene expression of cathepsin K/OC-2
Cross-Section Measurement of Virtual Photoproduction of Iso-Triplet Three-Body Hypernucleus, ⋀nn
Missing-mass spectroscopy with the 3H(e, e′K+) reaction was carried out at Jefferson Lab’s (JLab) Hall A in Oct–Nov, 2018. The differential cross section for the 3H(γ∗, K+)Λnn was deduced at ω = Ee − Ee′ = 2.102 GeV and at the forward K+-scattering angle (0° ≤ θγ∗K ≤ 5°) in the laboratory frame. Given typical predicted energies and decay widths, which are (BΛ, Γ) = (−0.25, 0.8) and (−0.55, 4.7) MeV, the cross sections were found to be 11.2 ± 4.8(stat.)+4.1−2.1(sys.) and 18.1 ± 6.8(stat.)+4.2−2.9(sys.) nb/sr, respectively. The obtained result would impose a constraint for interaction models particularly between Λ and neutron by comparing to theoretical calculations
- …