Effect of Elemental Shape and Modeling of Mixed Hybrid FEM on Numerical Solution

AbstractMixed Hybrid Finite element method, MHF, is known to be an efficient and powerful analyzing technique with satisfactory accuracy when differentiated variables should be evaluated, such as flow velocity based on velocity potential theory or stress calculated from displacement. On the other hand, it is known that the calculation accuracy and efficiency are affected by elemental shape and modeling. The aim of this study is to confirm the efficiency and accuracy of MHF by comparing it with FEM, and to discuss optimum elemental shapes and modeling. MHF, unlike FEM, evaluates the velocity potential and the flux on the element boundaries not at the element nodes; consequently, the material or mass balance of each element due to flow-in and flow-out through the boundaries can be strictly estimated. The flow velocity within an element, however, should be interpolated by those values on the boundaries, and a distinctive shape function, known as the Raviart-Thomas shape function, becomes necessary. The authors established the MHF formulation for arbitrary shaped elements with 3 and 4 boundaries, and numerically investigated its efficiency and accuracy with various shapes of elements. Through this study, it was confirmed that MHF can evaluate accurate flow velocity with a fewer number of elements than those of FEM. In addition, the effect of shape and modeling of elements on the numerical results were discussed to obtain better accuracy even if the total number of the elements is kept constant

Effect of varying the ratio of matrix/dispersoid particle size on the piezoresistivity of alumina/carbon-black composite ceramics

Alumina/carbon-black composite ceramics with different percolation thresholds were fabricated by changing the size ratio of constituent particles. The dependence of resistivity on pressure was established for each sample. The compositional dependence of resistivity can be explained by percolation theory. The percolation threshold decreases with increasing alumina/carbon-black particle size ratio. The pressure dependence of the resistivity increases as the composition approaches the percolation threshold. When the relative composition at the percolation threshold is fixed, the sensitivity increases with increasing matrix/dispersoid initial particle size ratio

Hitomi (ASTRO-H) X-ray Astronomy Satellite

The Hitomi (ASTRO-H) mission is the sixth Japanese x-ray astronomy satellite developed by a large international collaboration, including Japan, USA, Canada, and Europe. The mission aimed to provide the highest energy resolution ever achieved at E  >  2  keV, using a microcalorimeter instrument, and to cover a wide energy range spanning four decades in energy from soft x-rays to gamma rays. After a successful launch on February 17, 2016, the spacecraft lost its function on March 26, 2016, but the commissioning phase for about a month provided valuable information on the onboard instruments and the spacecraft system, including astrophysical results obtained from first light observations. The paper describes the Hitomi (ASTRO-H) mission, its capabilities, the initial operation, and the instruments/spacecraft performances confirmed during the commissioning operations for about a month

Hitomi X-Ray Studies of Giant Radio Pulses from the Crab Pulsar

To search for giant X-ray pulses correlated with the giant radio pulses (GRPs) from the Crab pulsar, we performed a simultaneous observation of the Crab pulsar with the X-ray satellite Hitomi in the 2300 keV band and the Kashima NICT radio telescope in the 1.41.7 GHz band with a net exposure of about 2 ks on 2016 March 25, just before the loss of the Hitomi mission. The timing performance of the Hitomi instruments was confirmed to meet the timing requirement and about 1000 and 100 GRPs were simultaneously observed at the main pulse and inter-pulse phases, respectively, and we found no apparent correlation between the giant radio pulses and the X-ray emission in either the main pulse or inter-pulse phase. All variations are within the 2 fluctuations of the X-ray fluxes at the pulse peaks, and the 3 upper limits of variations of main pulse or inter-pulse GRPs are 22% or 80% of the peak flux in a 0.20 phase width, respectively, in the 2300 keV band. The values for main pulse or inter-pulse GRPs become 25% or 110%, respectively, when the phase width is restricted to the 0.03 phase. Among the upper limits from the Hitomi satellite, those in the 4.510 keV and 70300 keV bands are obtained for the first time, and those in other bands are consistent with previous reports. Numerically, the upper limits of the main pulse and inter-pulse GRPs in the 0.20 phase width are about (2.4 and 9.3) 10(exp 11) erg cm(exp 2), respectively. No significant variability in pulse profiles implies that the GRPs originated from a local place within the magnetosphere. Although the number of photon-emitting particles should temporarily increase to account for the brightening of the radio emission, the results do not statistically rule out variations correlated with the GRPs, because the possible X-ray enhancement may appear due to a >0.02% brightening of the pulse-peak flux under such conditions

Production of siRNA-Loaded Lipid Nanoparticles using a Microfluidic Device

The development of functional lipid nanoparticles (LNPs) is one of the major challenges in the field of drug delivery systems (DDS). Recently, LNP-based RNA delivery systems, namely, RNA-loaded LNPs have attracted attention for RNA therapy. In particular, mRNA-loaded LNP vaccines were approved to prevent COVID-19, thereby leading to the paradigm shift toward the development of next-generation nanomedicines. For the LNP-based nanomedicines, the LNP size is a significant factor in controlling the LNP biodistribution and LNP performance. Therefore, a precise LNP size control technique is indispensable for the LNP production process. Here, we report a protocol for size controlled LNP production using a microfluidic device, named iLiNP. siRNA loaded LNPs are also produced using the iLiNP device and evaluated by in vitro experiment. Representative results are shown for the LNP size, including siRNA-loaded LNPs, Z-potential, siRNA encapsulation efficiency, cytotoxicity, and target gene silencing activity