298 research outputs found
Modeling spectral changes in singing voice for pitch modification
We present an advanced method to achieve natural modifications when applying a pitch shifting process to singing voice by modifying the spectral envelope of the audio ex- cerpt. To this end, an all-pole spectral envelope model has been selected to describe the global variations of the spectral envelope with the changes of the pitch. We performed a pitch shifting process of some sustained vowels with the envelope processing and without it, and compared both by means of a survey open to volunteers in our website.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech. This work has been funded by the Ministerio de Economía y Competitividad of the Spanish Government under Project No. TIN2013-47276-C6-2-R and by the Junta de Andalucía under Project No. P11-TIC-7154
Clinkering and hydration study of non-active and active Belite-Alite-Ye'elimite (BAY) cements
The aim of AIM is to promote industry-driven, interdisciplinary research in material science and engineering in order to provide leading-edge, sustainable solutions to the challenges facing engineers in today’s changing society and environment. http://www.ucl.ac.uk/aim/conference-info/37ccsThe manufacturing process of ye'elimite rich cements emit about 15-37% less CO2 to the atmosphere than OPC. Cements that contain belite, ye’elimite and ferrite, known as BYF cements, are promising eco-friendly binders. However, belite, their main phase, shows a slow hydrating behaviour; therefore the corresponding mortars present lower mechanical strengths than OPC at early ages. To solve this problem, BYF clinkers can be activated by: i) forming alite jointly with belite and ye’elimite during clinkering, known as BAY clinkers. The alite and ye’elimite reaction with water should develop high mechanical strengths at early ages, besides, belite contributes to later curing times. ii) A second activation is based on the stabilisation of alpha forms of belite by dopants. The objective of this work is to obtain two types of BAY clinkers (standard and active BAY) using CaF2 as mineraliser and borax as dopant agent to stabilize alpha forms of belite phase. After that, anhydrite was added as sulphate source to obtain the corresponding cements. The hydration behaviour of these cements has been studied through rheological and x-ray diffraction measurements, the latter combined with Rietveld quantitative phase analysis. In addition, mechanical and dimensional properties of BAY mortars are also presented and discussed.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech
Gel casting of aqueous suspensions of BaTiO3 nanopowders
Commercial nano BaTiO3 powders have been formed into green bodies using
colloidal forming routes. A study of the rheological behaviour of the suspensions as a
function of dispersant concentration and homogenisation time was made in order to
prepare stable concentrated suspensions of the nanopowders. Bulk components were
then manufactured using aqueous slip and gel casting involving polysaccharides that gel
on cooling, i.e. agar. The performance of theses consolidation techniques for obtaining
dense green bodies from the BaTiO3 nanopowders was studied. It was possible to
prepare relatively big gel cast samples with a similar density and microstructure and in a
shorter time compared to those obtained by slip casting
Análisis de los efectos de la implementación de la televisión digital terrestre en el Ecuador
La tesis se compone de 4 capítulos, en cada uno de ellos se realizó la correspondiente investigación, estudio y análisis y aplicación de la información más relevante concerniente al tema investigado. En el primer capítulo aborda la hipótesis, así como la justificación respectiva, objetivos general y específico de la tesis; pasando por el marco teórico necesario para introducir al lector en diversas definiciones y conceptos necesarios para el desarrollo de la misma, considerando la normativa legal pertinente: En el capítulo segundose considera la normativa constitucional y legal vigente, tratando de forma resumida la situación problemática de la televisión en el Ecuador, esto con el propósito de establecer el contexto en el cual se desarrollará el capítulo cuarto, que es el eje central de la tesis. El capítulo tercero, aborda casos de estudio de los procesos de implementación de la TDT en países como: Suecia, Francia, España, Italia, México y Brasil, destacando lo más relevante de cada una de las experiencias, recoge las diversas experiencias de los procesos de implementación de la TDT en dichos países y sintetiza lo más significativo. En el capítulo cuarto, se realiza el planteamiento de las mejores prácticas posibles de ser implementadas en el Ecuador durante el proceso de transición a la TDT, basado en las experiencias de los países antes señalados y criterios dela autora, todo esto adaptado a la realidad nacional. La tesis presenta también conclusiones y recomendaciones pertinentes, parte del aprendizaje obtenido durante el desarrollo del trabajo, enriquecidos por las experiencias de los procesos de migración a TDT dado en los países antes señalados, además de aportar con ideas prácticas e interesantes, posibles de ser implementadas durante la transición a la Televisión Digital Terrestre en el Ecuador
Wet forming of concentrated nano-BaTiO3 suspensions
Nanostructured materials are currently being studied extensively due to their unusual physical and mechanical properties. One of the most important dielectric materials is barium titanate (BaTiO3). Capacitors made of this material offer excellent frequency characteristics, high reliability, high breakdown voltage and excellent volumetric efficiency. It is believed that these properties may be significantly improved by achieving a structure at the nano scale.
In this work, nano BaTiO3 powders have been formed into complex-shaped green bodies using gelcasting as colloidal forming route. This procedure has demonstrated to be very effective for shaping submicron-sized powders and in this manuscript the achievement of this technique for the shaping of nano-sized powders is evaluated. The first step was the preparation of stable concentrated suspensions of the nanopowders through the optimization of the quantity of dispersant and time of homogenization. This was found to depend on the method of manufacture of the different commercial nanopowders investigated. Bulk components were then manufactured using aqueous gelcasting involving polysaccharides that gel on cooling. The performance of this consolidation technique for obtaining dense green bodies from the BaTiO3 nanopowders will be discussed
Preparation of high solids content nanozirconia suspensions
A new colloidal route leading to the production of ~99% dense 3 mol% yttria
stabilized zirconia nanostructured ceramics, whilst retaining a final average grain size of
~75 nm, has been developed. The process was based on the production of stable,
homogeneous nanosuspensions with solids contents of up to 28 vol% (70 wt%) but
viscosities less than 0.05 Pa s at any shear rate in the range of study were obtained. The
suspensions were formed by the concentration and optimization of precursor, dilute (5.0
vol%) commercial nanosuspensions, the approach requiring a change of pH, from the
2.4 of the as-received suspension to 11.5, and the use of an appropriate anionic
dispersant. Exposure of the nanosuspensions to ultrasound also helped to reduce the
viscosity further, though it only worked when the dispersant was optimized. The
nanosuspension was slip cast to form homogenous green bodies with densities of ~55%
of theoretical without agglomeration in the nanostructure; these were subsequently
densified using a two-step sintering techniqu
Herramienta tecnológica Socrative para mejorar el proceso de enseñanza en docentes de EGB Ecuador, 2022
El trabajo investigativo tiene como finalidad, “demostrar que la herramienta
socrative mejora el proceso de enseñanza” en docentes de una unidad educativa
del Ecuador 2022, el tipo de metodología que tiene el estudio es práctica o empírica,
explicativa con diseño preexperimental- no probabilístico. Los datos obtenidos se
recogieron mediante la técnica de encuesta, a través del instrumento cuestionario,
aplicado a 56 docentes de EGB del Ecuador, el cual tienen una confiabilidad alta
de acuerdo con el Alfa de Cronbach de 0,9. Se establecieron los siguientes
resultados: el uso de la herramienta Socrative mejora el “proceso de enseñanza
aprendizaje en docentes, esto se visualiza en la Tabla 2 de resultados, con un
porcentaje de 14% en nivel medio en pre test, convirtiéndose en un 100% nivel alto
en el post test; de la misma manera se confirmó la hipótesis de la investigación al
tener un 0,014 siendo menor a 0,05. De la misma manera, se comprobó que la
creatividad y el proceso pedagógico mejoró en la (tabla 3,4,5) aceptando las
hipótesis de la investigación
Advanced synchrotron studies of ye'elimite-based cement pastes
Synchrotron characterization techniques [1] are being used to study Portland-based cements and recently also CSA and related cements. A key property of these techniques is that they do not require sample preparation, so the microstructures of the pastes can be preserved. The classical application of synchrotron tools is powder diffraction used to determine the crystalline phase content evolution with hydration including the overall amorphous fraction. Furthermore, other most advanced techniques are being applied to ye'elimite-containing pastes such as i) Total Scattering Synchrotron Powder Diffraction (TS-SXPD), and ii) Ptychographic Synchrotron X-ray Computed Tomography (PSXCT). All these applications will be reviewed here.
TS-SXPD data coupled with the Pair Distribution Function (PDF) analysis methodology [2] allows having a better insight about the nanocrystalline/amorphous atomic arrangements in the gels. It has been very recently shown that nanogibbsite with very small particles, 3nm, is the main constituent of ye'elimite-gypsum hydration paste [2]. Nanogibbsite particles being smaller than those originated from the hydration of monocalcium aluminate. In addition, PSXCT is a tomographic technique that profits from the partly coherent nature of the synchrotron beam to provide better (smaller) resolution, which can be lower than 100 nm. It also provides the mass densities if the chemical stoichiometries are known. This technique has been applied to ye'elimite hydration to determine the microstructure and chiefly the bulk densities of nanogibbsite [3]. The microstructure evolution at early age was also followed [4]. Figure 1 shows an example of a slide of the electron density tomogram for a ye'elimite paste at 8 days of hydration and the corresponding histogram for the full volume with all phases identified.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech.This work has been supported by Spanish MINECO through BIA2014-57658-C2 and BIA2017-82391-R, which are co-funded by FEDER
Una mirada al trabajo documental de un profesor de primaria al seleccionar recursos para enseñar geometría
Estudiamos el proceso de selección de recursos, por parte de un profesor de quinto grado de primaria en Colombia, para enseñar geometría. Para ello, retomamos algunos conceptos de la Aproximación Documental de la Didáctica (ADD), tales como “sistema de recursos” y “esquema”; y de la teoría de los Espacios de Trabajo Matemático (ETM), los “paradigmas geométricos” definidos por Kuzniak y colegas. Analizamos el trabajo documental del profesor, usando una metodología de investigación reflexiva para analizar los recursos que utiliza en su práctica y estudiar la evolución de las representaciones o mapas que hace el profesor sobre su selección de recursos para enseñar geometría. Como principal resultado de investigación, inferimos el esquema del profesor que orienta su selección de recursos (digitales y no digitales) para enseñar transformaciones geométricas, donde identificamos invariantes operatorias o criterios involucrados en ese esquema, derivados de sus conocimientos profesionales. Concluimos que esos conocimientos son diversos y se relacionan con aspectos de contenido matemático, curriculares, de características didácticas del recurso, cognitivos y ergonómicos
Reflexiones de profesores de primaria sobre la selección de recursos digitales para clases de geometría
La selección de recursos para la clase es una de las actividades profesionales más desafiantes para los profesores de matemáticas. Determinar qué recursos usar, cómo buscarlos y dónde encontrarlos requiere de una serie de conocimientos profesionales que orientan la acción del profesor. En este sentido, nos interesa presentar algunos resultados de un estudio sobre las reflexiones de un grupo de profesores cuando seleccionaron recursos digitales para la enseñanza de la geometría en primaria. Para esto, se propuso una investigación reflexiva en la que participó un grupo de 30 maestros. El análisis obtenido permitió que los participantes reflexionaran y se concientizaran sobre los criterios (ergonómicos, curriculares, matemáticos y didácticos) que tienen en cuenta cuando seleccionan recursos digitales para sus clases
- …