43 research outputs found
Use of Modified 3D Scaffolds to Improve Cell Adhesion and Drive Desired Cell Responses.
In the most common approach of tissue engineering, a polymeric scaffold with a well-defined architecture has emerged as a promising platform for cells adhesion and guide their proliferation and differentiation into the desired tissue or organ. An ideal model for the regeneration should mimic clinical conditions of tissue injury, create a permissive microenvironment for diffusion of nutrients, gases and growth factors and permit angiogenesis. In this work, we used a 3D support made of synthetic resorbable polylactic acid (PLLA), which has considerable potential because of its well-known biocompatibility and biodegradability. One of the factors that influence cell adhesion to the scaffold is its porosity degree, but surface properties represent the main driving forces that influence the composition and orientation of proteins that will be absorbed onto material surfaces. We used scaffolds in which it was possible to control pore size and that had undergone on type-I collagen treatment, to mimic the extra cellular matrix, or plasma enhanced chemical vapor deposition (PE-CVD) combined with plasma treatment, in order to modify surface chemistry of the material. Our results show different cell affinity in non-treated scaffolds compared to type-I collagen or plasma modified ones. These surface changes are of considerable interest for tissue engineering and other areas of biomaterials science, where it can be useful to improve the surface of biomedical polymers to facilitate the colonization of the structure by the cells and obtain a more rapid regeneration or tissue replacement.In the most common approach of tissue engineering, a polymeric scaffold with a well-defined architecture has emerged as a promising platform for cells adhesion and guide their proliferation and differentiation into the desired tissue or organ. An ideal model for the regeneration should mimic clinical conditions of tissue injury, create a permissive microenvironment for diffusion of nutrients, gases and growth factors and permit angiogenesis. In this work, we used a 3D support made of synthetic resorbable polylactic acid (PLLA), which has considerable potential because of its well-known biocompatibility and biodegradability. One of the factors that influence cell adhesion to the scaffold is its porosity degree, but surface properties represent the main driving forces that influence the composition and orientation of proteins that will be absorbed onto material surfaces. We used scaffolds in which it was possible to control pore size and that had undergone on type-I collagen treatment, to mimic the extra cellular matrix, or plasma enhanced chemical vapor deposition (PE-CVD) combined with plasma treatment, in order to modify surface chemistry of the material. Our results show different cell affinity in non-treated scaffolds compared to type-I collagen or plasma modified ones. These surface changes are of considerable interest for tissue engineering and other areas of biomaterials science, where it can be useful to improve the surface of biomedical polymers to facilitate the colonization of the structure by the cells and obtain a more rapid regeneration or tissue replacement. Copyright © 2012, AIDIC Servizi S.r.l
Immunocompetent 3D Model of Human Upper Airway for Disease Modeling and In Vitro Drug Evaluation
The development of more complex in vitro models for the assessment of novel drugs and chemicals is needed because of the limited biological relevance of animal models to humans as well as ethical considerations. Although some human-cell-based assays exist, they are usually 2D, consist of single cell type, and have limited cellular and functional representation of the native tissue. In this study, we have used biomimetic porous electrospun scaffolds to develop an immunocompetent 3D model of the human respiratory tract comprised of three key cell types present in upper airway epithelium. The three cell types, namely, epithelial cells (providing a physical barrier), fibroblasts (extracellular matrix production), and dendritic cells (immune sensing), were initially grown on individual scaffolds and then assembled into the 3D multicell tissue model. The epithelial layer was cultured at the air–liquid interface for up to four weeks, leading to formation of a functional barrier as evidenced by an increase in transepithelial electrical resistance (TEER) and tight junction formation. The response of epithelial cells to allergen exposure was monitored by quantifying changes in TEER readings and by assessment of cellular tight junctions using immunostaining. It was found that epithelial cells cocultured with fibroblasts formed a functional epithelial barrier at a quicker rate than single cultures of epithelial cells and that the recovery from allergen exposure was also more rapid. Also, our data show that dendritic cells within this model remain viable and responsive to external stimulation as evidenced by their migration within the 3D construct in response to allergen challenge. This model provides an easy to assemble and physiologically relevant 3D model of human airway epithelium that can be used for studies aiming at better understanding lung biology, the cross-talk between immune cells, and airborne allergens and pathogens as well as drug delivery
Complexity and dynamics of the winemaking bacterial communities in berries, musts, and wines from apulian grape cultivars through time and space
Currently, there is very little information available regarding the microbiome associated with the wine production chain. Here, we used an amplicon sequencing approach based on high-throughput sequencing (HTS) to obtain a comprehensive assessment of the bacterial community associated with the production of three Apulian red wines, from grape to final product. The relationships among grape variety, the microbial community, and fermentation was investigated. Moreover, the winery microbiota was evaluated compared to the autochthonous species in vineyards that persist until the end of the winemaking process. The analysis highlighted the remarkable dynamics within the microbial communities during fermentation. A common microbial core shared among the examined wine varieties was observed, and the unique taxonomic signature of each wine appellation was revealed. New species belonging to the genus Halomonas were also reported. This study demonstrates the potential of this metagenomic approach, supported by optimized protocols, for identifying the biodiversity of the wine supply chain. The developed experimental pipeline offers new prospects for other research fields in which a comprehensive view of microbial community complexity and dynamics is desirable.Peer ReviewedPostprint (published version
The influence of invasive jellyfish blooms on the aquatic microbiome in a coastal lagoon (Varano, SE Italy) detected by an Illumina-based deep sequencing strategy
Nanotexturing of polymers by cold plasmas: switching from sticky to slippery superhydrophobicity
Nanostructuring of Teflon-likes in Single Step Processes
It is a general trend nowadays, and is also an useful approach for many important industrial applications, to tailor polymers to the desired chemistry or nano-morphology. The combination of both, chemistry and morphology, is a surplus value. Particularly if it is possible to tune each feature independently of the other.Nagasaki Symposium on Nano-Dynamics 2008 (NSND2008) 平成20年1月29日(火)於長崎大学 Invited Lectur
A comparison of 3D poly(e-caprolactone) tissue engineering scaffolds produced with conventional and additive manufacturing techniques by means of quantitative analysis of SR m-CT images
The technique used to produce a 3D tissue engineering (TE) scaffold is of fundamental
importance in order to guarantee its proper morphological characteristics. An accurate assessment of the resulting structural properties is therefore crucial in order to evaluate the effectiveness of the produced scaffold. Synchrotron radiation (SR) computed microtomography (m-CT) combined with further image analysis seems to be one of the most effective techniques to this aim. However, a quantitative assessment of the morphological parameters directly from the reconstructed images
is a non trivial task. This study considers two different poly(e-caprolactone) (PCL) scaffolds fabricated with a conventional technique (Solvent Casting Particulate Leaching, SCPL) and an additive manufacturing (AM) technique (BioCell Printing), respectively. With the first technique it is possible
to produce scaffolds with random, non-regular, rounded pore geometry. The AM technique instead is able to produce scaffolds with square-shaped interconnected pores of regular dimension. Therefore, the final morphology of the AM scaffolds can be predicted and the resulting model can
be used for the validation of the applied imaging and image analysis protocols. It is here reported a SR m-CT image analysis approach that is able to effectively and accurately reveal the differences
in the pore- and throat-size distributions as well as connectivity of both AM and SCPL scaffolds
PE-CDV of fluorocarbon coatings from hexafluoropropylene oxide: glow vs afterglow
Smooth and micro/nano-structured fluorocarbon coatings are obtained by radio frequency (RF), 13.56 MHz, glow discharges fed with hexafluoropropylene oxide (C(3)F(6)O, HFPO) both in glow and in afterglow. It is shown that the extent of micro/nanostructuring, as well as the F/C ratio of the coatings, can be precisely tuned with both substrate position and deposition time. Nodular and "stone roses" morphological features are easily obtained, with good reproducibility. by controlling the plasma parameters. Both chemical and morphological features are shown to deeply affect film properties and, in turn, wetability. allowing a move from a hydrophobic behavior to a superhydrophobic one
A comparison of 3D poly(ε-caprolactone) tissue engineering scaffolds produced with conventional and additive manufacturing techniques by means of quantitative analysis of SR μ-CT images
Risk assessment of upper limbs repetitive movements in a fish industry
Objective: Work-related Musculoskeletal Disorders (WMSDs) have a multifactorial origin: work-related risk factors and individual factors (age, sex, anthropometric characteristics). The purpose of the current study was the risk assessment of upper limb-WMSDs of workers engaged in tasks of anchovies filleting and packaging in a fish industry considering the ergonomic evaluation and the painful symptomatology complained by employees of different age. The activities were analysed by the American Conference Governmental Industrial Hygienists (ACGIH) method, the Strain Index (SI) method, the Rapid Upper Limb Assessment (RULA) method as well as the Occupational Rapid Assessment (OCRA) checklist. Workers answered the Italian version of the Nordic Musculoskeletal Questionnaire (NMQ). Results: The ACGIH method showed that packaging needs greater protection, while filleting requires ergonomic interventions. The SI showed a significant increasing risk for both tasks. The final score identified by RULA, for tasks of fish filleting and packaging, suggested a medium level of action, therefore were required additional observations. By OCRA checklist the final score for both tasks denoted a high risk