Locking device for turbine rotor blades Patent

Locking device for retaining turbine rotor blades on turbine whee

The Method of Fundamental Solutions for Direct Cavity Problems in EIT

The Method of Fundamental Solutions (MFS) is an effective technique for solving linear elliptic partial differential equations, such as the Laplace and Helmholtz equation. It is a form of indirect boundary integral equation method and a technique that uses boundary collocation or boundary fitting. In this paper the MFS is implemented to solve A numerically an inverse problem which consists of finding an unknown cavity within a region of interest based on given boundary Cauchy data. A range of examples are used to demonstrate that the technique is very effective at locating cavities in two-dimensional geometries for exact input data. The technique is then developed to include a regularisation parameter that enables cavities to be located accurately and stably even for noisy input data

An agent-based model of anoikis in the colon crypt displays novel emergent behaviour consistent with biological observations

Colorectal cancer (CRC) is a major cause of cancer mortality. Colon crypts are multi-cellular flask-shaped invaginations of the colonic epithelium, with stem cells at their base which support the continual turnover of the epithelium with loss of cells by anoikis from the flat mucosa. Mutations in these stem cells can become embedded in the crypts, a process that is strongly implicated in CRC initiation. We describe a computational model which includes novel features, including an accurate representation of the geometry of the crypt mouth. Model simulations yield previously unseen emergent phenomena, such as localization of cell death to a small region of the crypt mouth which corresponds with that observed in vivo. A mechanism emerges in the model for regulation of crypt cellularity in response to changes in either cell proliferation rates or membrane adhesion strengths. We show that cell shape assumptions influence this behaviour, with cylinders recapitulating biology better than spheres. Potential applications of the model include determination of roles of mutations in neoplasia and exploring factors for altered crypt morphodynamics

CO2-enhanced and humidified operation of a micro-gas turbine for carbon capture

As greenhouse gas emissions are a key driver of climate change, sources of CO2 must be mitigated, particularly from carbon-intensive sectors, like power production. Natural gas provides an increasingly large percentage of electricity; however its lower carbon intensity is insufficient to make proportional reduction contributions to circumvent 2 °C global warming. The low partial pressure of CO2 in its flue gas makes post-combustion capture more challenging – increasing the CO2 in the exhaust assists in enhancing capture efficiency. This paper experimentally investigates the impact of the combination of humidified air turbines and exhaust gas recirculation to increase CO2 partial pressures, with the aim of evaluating their effects on emissions and turbine parameters at various turndown ratios. It was found that CO2 levels could be increased from 1.5 to 5.3 vol%, meaning more efficient post-combustion capture would be possible. CO2 and steam additions increased incomplete combustion when used together at high levels for low turndown ratios (below 60%), with CO increasing from 49 to 211 ppm and CH4 from 2.5 to 52 ppm; this effect was negated at higher power outputs. Turbine cycle humidification resulted in net improvements to the turbine efficiency, by up to 5.5% on a specific fuel consumption basis

Density-functional studies of tungsten trioxide, tungsten bronzes, and related systems

Tungsten trioxide adopts a variety of structures which can be intercalated with charged species to alter the electronic properties, thus forming `tungsten bronzes'. Similar optical effects are observed upon removing oxygen from WO_3, although the electronic properties are slightly different. Here we present a computational study of cubic and hexagonal alkali bronzes and examine the effects on cell size and band structure as the size of the intercalated ion is increased. With the exception of hydrogen (which is predicted to be unstable as an intercalate), the behaviour of the bronzes are relatively consistent. NaWO_3 is the most stable of the cubic systems, although in the hexagonal system the larger ions are more stable. The band structures are identical, with the intercalated atom donating its single electron to the tungsten 5d valence band. Next, this was extended to a study of fractional doping in the Na_xWO_3 system (0 < x < 1). A linear variation in cell parameter, and a systematic change in the position of the Fermi level up into the valence band was observed with increasing x. In the underdoped WO_3-x system however, the Fermi level undergoes a sudden jump into the conduction band at around x = 0.2. Lastly, three compounds of a layered WO_4&#215;a,wdiaminoalkane hybrid series were studied and found to be insulating, with features in the band structure similar to those of the parent WO_3 compound which relate well to experimental UV-visible spectroscopy results.Comment: 12 pages, 16 figure

An instrument to measure fast gas phase radical kinetics at hight temperatures and pressures

Fast radical reactions are central to the chemistry of planetary atmospheres and combustion systems. Laser-induced fluorescence is a highly sensitive and selective technique that can be used to monitor a number of radical species in kinetics experiments, but is typically limited to low pressure systems owing to quenching of fluorescent states at higher pressures. The design and characterisation of an instrument is reported using laser-induced fluorescence detection to monitor fast radical kinetics (up to 25,000 s-1) at high temperatures and pressures by sampling from a high pressure reaction region to a low pressure detection region. Kinetics have been characterised at temperatures reaching 740 K and pressures up to 2 atm, with expected maximum operational conditions of up to ~ 900 K and ~ 5 atm. The distance between the point of sampling from the high pressure region and the point of probing within the low pressure region is critical to the measurement of fast kinetics. The instrumentation described in this work can be applied to the measurement of kinetics relevant to atmospheric and combustion chemistry

Winglet design for vertical axis wind turbines based on a design of experiment and CFD approach

Vertical axis wind turbines (VAWTs) have been attracting an increasing attention in recent years because of their potential for effectively using wind energy. The tip vortices from the VAWT blades have a negative impact on the power efficiency. Since a winglet has been proved to be effective in decreasing the tip vortex in the aerospace field, this paper numerically studies the aerodynamic effect of appending a winglet on the blade of a VAWT. Based on the theoretical motion pattern of the VAWT blade, this paper simplifies the three-dimensional full-scale rotor simulation to a one-blade oscillating problem in order to reduce the computational cost. The full rotor model simulation is also used in validating the result. The numerical approach has been validated by the experimental data that is available in the open literature. Six parameters are applied in defining the configuration of the winglet. The orthogonal experimental design (OED) approach is adopted in this paper to determine the significance of the design parameters that affect the rotor’s power coefficient. The OED results show that the twist angle of the winglet is the most significant factor that affects the winglet’s performance. A range analysis of the OED results produces an optimal variable arrangement in the current scope, and the winglet’s performance in this variable arrangement is compared with the blade without a winglet. For the single blade study, the comparison result shows that the optimal winglet can decrease the tip vortices and improve the blade’s power performance by up to 31% at a tip speed ratio of 2.29. However, for the full VAWT case, the relative enhancement in the power coefficient is about 10.5, 6.7, and 10.0% for TSRs of 1.85, 2.29, and 2.52, respectively. The winglet assists in maintain the pressure difference between the two sides of the blade, thus weakening the tip vortex and improving the aerodynamic efficiency of the surface near the blade tip

On the mechanism of iodine oxide particle formation

The formation of atmospherically relevant iodine oxides IxO y (x = 1,...,3, y = 1,...,7) has been studied experimentally using time-of-flight mass spectrometry combined with a soft ionisation source, complemented with ab initio electronic structure calculations of ionisation potentials and bond energies at a high level of theory presented in detail in the accompanying paper (Galvez et al., 2013). For the first time, direct experimental evidence of the I2Oy (y = 1,...,5) molecules in the gas phase has been obtained. These chemical species are observed alongside their precursors (IO and OIO) in experiments where large amounts of aerosol are also generated. The measured relative concentrations of the I xOy molecules and their dependence on ozone concentration have been investigated by using chemical modelling and rate theory calculations. It is concluded that I2O4 is the most plausible candidate to initiate nucleation, while the contribution of I2O5 in the initial steps is likely to be marginal. The absence of large I 3Oy (y = 3,...,6) peaks in the mass spectra and the high stability of the I2O4-I2O4 dimer indicate that dimerisation of I2O4 is the key step in iodine oxide particle nucleation