Psychological Distress and Work Engagement of Construction Workers during the COVID-19 Pandemic: A Differential Study by Sex

Since the beginning of the COVID-19 pandemic, a major impact on the mental health of the population has been observed, with women being one of the most affected groups. From the lockdown to “de-escalation” phases, sex differences have been recognised as significant determinants of mental health. Thus, equally ensuring physical and mental protection at work remains one of the challenges faced by industrial companies, especially in the construction sector, where the percentage of employed women has increased in recent years. This study aims to examine the impact of sex differences on psychological distress and work engagement in the productive construction sector, as well as related variables. For this, a cross-sectional descriptive study was performed. Descriptive statistical analyses were completed, and non-parametric Mann-Whitney U and Chi-squared tests were used to identify differences between men and women. This was followed by logistic regression analysis by sex. Psychological distress is more prevalent among women, even after controlling for most variables. Both sexes receive equal preventive measures and training from the companies, yet women still experience higher levels of psychological distress. At the beginning of the pandemic, women reported higher levels of anxiety and fear of COVID-19 and of perceived danger associated with the pandemic than men. However, these differences were not present by 2023. For men, work engagement appeared to be a determining factor for a stable mental health, while for women, health and physical status seemed to be more influential. In both sexes, psychological distress was found to be conditioned by mental and emotional well-being. In a sector where women are increasingly present, the differences observed in terms of how physical and mental health are affected across the two sexes justify the need to promote data analysis that acknowledges this reality.This research is part of the project “Impact of the COVID-19 pandemic on the emotional and occupational health of construction workers: Evaluation and intervention proposals” which was funded by the Andalusian Institute for the Prevention of Occupational Hazards (IAPRL), part of the Ministry of Employment, Training and Self-Employment of Andalusia (CTC-2022142721).Departamento de Biología Ambiental y Salud Públic

Tribological Properties of Ti6Al4V Titanium Textured Surfaces Created by Laser: Effect of Dimple Density

The loss of energy due to friction is one of the major problems industries are facing nowadays. Friction and wear between sliding components reduce the mechanical efficiency of machines and have a negative impact on the environment. In recent years, surface texturing has shown tremendous ability to reduce friction and wear. Micro-features generated on surfaces act as a secondary reservoir for lubricants and wear debris receptacles to further reduce abrasion. In addition, surface texturing boosts hydrodynamic pressure, which increases the elasto-hydrodynamic lubrication regime of the Stribeck curve, reducing friction and wear. Amongst all different techniques to texture surfaces, laser texturing is the most popular due to its advantages such as high accuracy, good consistency and celerity as compared to other techniques. This study investigated the effect of laser texturing on the tribological properties of Ti6Al4V in contact with a ceramic ball. The effect of varying the dimple density on friction and wear was studied using a ball-on-flat reciprocating tribometer under lubricated conditions. Results show that friction and wear were reduced for all the textured samples as compared to an untextured sample, with important friction and wear reductions for the samples with the highest dimple densities. For samples with intermediate dimple densities, the friction coefficient stayed low until the dimples wore out from the surface and then increased to a value similar to the friction coefficient of the untextured surface. The dimple wear-out time observed in these specimens was greatly influenced by the dimple density

Virtual restoration and visualization changes through light: A review

This article belongs to the Special Issue Optical Technologies Applied to Cultural Heritage.The virtual modification of the appearance of an object using lighting technologies has become very important in recent years, since the projection of light on an object allows us to alter its appearance in a virtual and reversible way. Considering the limitation of non-contact when analysing a work of art, these optical techniques have been used in fields of restoration of cultural heritage, allowing us to visualize the work as it was conceived by its author, after a process of acquisition and treatment of the image. Furthermore, the technique of altering the appearance of objects through the projection of light has been used in projects with artistic or even educational purposes. This review has treated the main studies of light projection as a technique to alter the appearance of objects, emphasizing the calibration methods used in each study, taking into account the importance of a correct calibration between devices to carry out this technology. In addition, since the described technique consists of projecting light, and one of the applications is related to cultural heritage, those studies that carry out the design and optimization of lighting systems will be described for a correct appreciation of the works of art, without altering its state of conservationThis work has been funded by project number RTI2018-097633-A-I00 of the Ministry of Science and Innovation of Spain, entitled 'Photonic restoration applied to cultural heritage: Application to Dali's painting: Two Figures.

Factors related to mortality of patients with COVID-19 who are admitted to the ICU Prognostic mortality factors of COVID-19 patients

During the severe acute respiratory syndrome coronavirus 2 pandemic, hospital resources, particularly critical care units, were overburdened and this had a significant impact on both the therapies and the prognosis of these patients. This study aimed to identify factors and therapies that may improve prognosis and other factors associated with increased mortality. A secondary objective was to evaluate the impact that obesity had on these patients. An observational study was conducted on 482 patients aged 18 years or older who were diagnosed with SARS-CoV-2 pneumonia and admitted to the Intensive Care Units of 3 national hospitals registered in the CIBERESUCICOVID database between September 2020 and March 2021. After identifying the sample profile, risk factors were analyzed, the predictive model was constructed, and crude odd ratios were calculated for each factor. Additionally, logistic regression was used to build the multivariate model adjusting for potential confounders. The final model included only the variables selected using the Backward method. A sample of 335 men (69.5%) and 145 women (30.08%) aged 61.94 ± 12.75 years with a body mass index (BMI) of 28.05 (25.7; 31.2) was obtained. A total of 113 patients received noninvasive mechanical ventilation. The most common comorbidities were: high blood pressure (51.04%), obesity (28%), diabetes mellitus (23.44%), other metabolic diseases (21.16%), chronic heart failure (18.05%), chronic obstructive pulmonary disease (11.62%), and chronic kidney disease (10.16%). In-hospital, 3-month and 6-month post-discharge mortality in patients with BMI > 30 (n = 135) versus BMI ≤ 30 (n = 347) was significantly different (P = .06). Noninvasive mechanical ventilation failed in 42.4% of patients with BMI > 30 compared to 55% of patients with BMI ≤ 30. This study identified the factors associated with failure of mechanical ventilation. The most common comorbidities were congestive heart failure, high blood pressure, chronic kidney disease, severe liver disease, diabetes mellitus, and solid organ transplantation. In terms of ventilatory support, patients who received high-flow nasal oxygen therapy on admission had lower mortality rates. The use of renal replacement therapy was also significantly associated with higher mortality.Departamento de Biología Ambiental y Salud Públic

Evaluation of the Level of Psychological Distress in Construction Workers during the COVID-19 Pandemic in Southern Spain

The COVID-19 pandemic posed a major challenge for construction companies, which were confronted with the need to prevent the enormous negative socio-psychological impact of the pandemic on their employees. The aim of this study was to evaluate the level of psychological distress among construction workers in an advanced phase of the COVID-19 pandemic in Andalusia, southern Spain. For this, a cross-sectional descriptive study was conducted using online questionnaires with data on sociodemographic variables and employment situation, COVID-19 pandemicrelated data, and Goldberg’s General Health Questionnaire (GHQ-12). A total of 860 questionnaires from all provinces of Andalusia, Spain, were collected between March and May 2022. Descriptive statistical analyses and non-parametric Mann–Whitney U and Chi-squared tests were performed, followed by logistic regression analysis. The incidence of psychological distress was higher among women, individuals under 43 years of age, those with a family income below EUR 1200, participants whose working conditions had been affected by the pandemic, those who had not received adequate means or specific training to protect themselves from infection, those who had experienced symptoms, those who had suffered side effects after vaccination, and those who had been hospitalised. The logistic regression analysis predicted the occurrence of psychological distress in this study by the effect of the pandemic on mental/emotional well-being, the working conditions affected during the pandemic, health-related variables, and the age of the worker. The correctly classified percentage was 75.1%. Assessing psychological distress in construction sectors may allow for the identification of vulnerable groups or even help to reduce the number of errors in daily practice and potential risks of occupational injury or illness.This research is part of the project "Impact of the COVID-19 pandemic on the emotional and occupational health of construction workers: Evaluation and intervention proposals" which was funded by the Andalusian Institute for the Prevention of Occupational Hazards (IAPRL), part of the Ministry of Employment, Training and Self-Employment of Andalusia (CTC-2022142721).Departamento de Biología Ambiental y Salud PúblicaDepartamento de Economía General y EstadísticaDepartamento de Enfermerí

Exploratory study on dyadic interactions with and without objects in western humans and chimpanzees

The aim of this study is to analyse the development of communication and cooperation in three different kinds of dyads: a western human dyad, a chimpanzee dyad, and a dyad composed of a human and a baby chimpanzee. These three different kinds of dyads participated in this research. We observed them for 12.37 h, 9 h, and 10.6 h, respectively, using narrative register and/or video tape recordings. The results show the different roles that objects play in their interaction. In the first case, the objects were used but did not catch the partners’ attention; in the second, the baby chimp asked the person who had engaged with her previously in interactive formats, for an object. In the last case, the objects were not only asked for but also made the centre of communicative acts, for which this communication had the only aim. However, the communicative repertoires of the baby chimpanzees that were analysed did not include protodeclaratives, and their expressions were dependent on contexts. The other characteristics of their social and communicative development are discusse

Assessment the SlidingWear Behavior of Laser Microtexturing Ti6Al4V under Wet Conditions

Laser micro-texturing processes, compared to untreated surfaces, can improve the friction, wear and wettability behavior of sliding parts. This improvement is related to the micro-geometry and the dimensions of the texture which is also dependent on the processing parameters. This research studied the effect of laser textured surfaces on the tribological behavior of titanium alloy Ti6Al4V. The influence of processing parameters was analyzed by changing the scanning speed of the beam and the energy density of pulse. First, the characterization of dimensional and geometrical features of the texturized tracks was carried out. Later, their influence on the wetting behavior was also evaluated through contact angle measurements using water as a contact fluid. Then, the tribological performance of these surfaces was analyzed using a ball-on-flat reciprocating tribometer under wet and dry conditions. Finally, wear mechanisms were identified employing electronic and optical microscopy techniques capable to evaluate the wear tracks on Ti surfaces and WC–Co spheres. These analyses had determined a strong dependence between the wear behavior and the laser patterning parameters. Wear friction effects were reduced by up to a 70% replacing conventional untreated surfaces of Ti6Al4V alloy with laser textured surfaces

A self-scalable distributed network simulation environment based on cloud computing

Producción CientíficaWhile parameter sweep simulations can help undergraduate students and researchers to understand computer networks, their usage in the academia is hindered by the significant computational load they convey. This paper proposes DNSE3, a service oriented computer network simulator that, deployed in a cloud computing infrastructure, leverages its elasticity and pay-per-use features to compute parameter sweeps. The performance and cost of using this application is evaluated in several experiments applying different scalability policies, with results that meet the demands of users in educational institutions. Additionally, the usability of the application has been measured following industry standards with real students, yielding a very satisfactory user experience.Ministerio de Economía, Industria y Competitividad (Projects TIN2014-53199-C3-2-R and TIN2017-85179-C3-2-R)Junta de Castilla y León (programa de apoyo a proyectos de investigación - Ref. VA082U16

Relocation and seismotectonic interpretation of the seismic swarm of August – December of 2012 in the Linares area, northeastern Mexico

We relocated 52 events of 2.5 ≤ Mc ≤ 3.6 from a seismic sequence of over 250 events that occurred during July-December 2012 southwest of the Linares area, northeastern Mexico. To examine this swarm four seismic stations were installed in the region and operated during different time periods from September to December. Relocation of the swarm showed that the earthquake hypocentral depths were at 8 (±5) km, and the time residuals had values ≤ 0.38 s. The fault plane solutions were generated for individual earthquakes and through the use of the composite mechanism technique. The focal mechanism solutions show pure reverse faulting; the SW dipping NNW – SSE trending nodal plane is the inferred fault plane (strike ~150°, dip ~50° and rake ~67°), which reveals that maximum horizontal stress (SHmax > Shmin > Sv) predominates in the area. RESUMEN En este trabajo relocalizamos 52 sismos en el rango de 2.5 ≤ Mc ≤ 3.6 de una secuencia sísmica de más de 250 eventos que ocurrió al suroeste de la ciudad de Linares, N.L., durante los meses de julio – diciembre de 2012, en el noreste de México. Para estudiar este enjambre se instalaron cuatro estaciones sismológicas en la región de interés, las cuales operaron durante diferentes periodos entre septiembre y diciembre. La relocalización de la secuencia demostró que las profundidades hipocentrales fueron de 8 (±5) km, y los residuales de los tiempos de arribo tuvieron valores ≤ 0.38 s. Se generaron soluciones del plano de falla para sismos individuales, así como a través de la técnica de mecanismos compuestos. La solución de los mecanismos focales encontrada corresponde con fallamiento inverso con rumbo NNW-SSE y buzamiento hacia el SW para el plano nodal inferido (rumbo ~150°, buzamiento ~50° y ángulo de deslizamiento ~67°), el cual revela que el esfuerzo horizontal máximo predomina en el área de estudio (SHmax > Shmin > Sv)

Needs and Expectations of Long-Term Cancer Survivors: Multi-Centre Study Protocol

Cancer is a social issue as its outreach affects not only mortality (it is the second cause of death in our environment) but also the costs due to morbidity and the distress it causes, as well as the losses and consequences in personal, family, work, and even social areas. This study is trying to find out the health needs of long-term cancer survivors and their perceptions and expectations of the care they received during their survival stage. For this, a joint, cross-sectional descriptive study with a qualitative and quantitative approach has been designed. For the qualitative approach, we have used different focus groups representing different geographical areas of the Spanish territory. For the qualitative approach, we have used a validated questionnaire. This study will provide a better knowledge of the quality of life of these patients, as well as their level of unmet and even unexpressed needs, in order to develop effective strategies and interventions that allow for the implementation of adapted care plans that include such unexpressed needs. This study will also allow for the creation and development of assessment methods for health results from the patient’s perspective and experience. These issues require a multidisciplinary, complex approach. These survivors may require not well-known health services, as the number of these patients has grown recently, and their survival time is also longer. This research explores a wider and more thorough perspective of long-term cancer survivors’ needs, experiences, and expectations to be achieved.Departamento de Biología Ambiental y Salud Públic