Lossy/Lossless Floating/Grounded Inductance Simulation Using One DDCC

In this work, we present new topologies for realizing one lossless grounded inductor and two floating, one lossless and one lossy, inductors employing a single differential difference current conveyor (DDCC) and a minimum number of passive components, two resistors, and one grounded capacitor. The floating inductors are based on ordinary dual-output differential difference current conveyor (DO-DDCC) while the grounded lossless inductor is based one a modified dual-output differential difference current conveyor (MDO-DDCC). The proposed lossless floating inductor is obtained from the lossy one by employing a negative impedance converter (NIC). The non-ideality effects of the active element on the simulated inductors are investigated. To demonstrate the performance of the proposed grounded inductance simulator as an example, it is used to construct a parallel resonant circuit. SPICE simulation results are given to confirm the theoretical analysis

On the EDM Cancellations in D-brane models

We analyze the possibility of simultaneous electron, neutron, and mercury electric dipole moment (EDM) cancellations in the mSUGRA and D--brane models. We find that the mercury EDM constraint practically rules out the cancellation scenario in D-brane models whereas in the context of mSUGRA it is still allowed with some fine-tuning.Comment: 10 pages, to appear in Phys. Rev. Let

Kesan penggunaan koswer multimedia animasi visual terhadap pencapaian pelajar dalam mata pelajaran matematik

Ramai pelajar yang bermasalah dalam topik Pelan dan Dongakan. Ini kerana pelajar sukar untuk membayangkan objek yang tersembunyi melalui proses pengajaran dan pembelajaran (P&P) secara konvensional. Penyelidik telah membangunkan satu koswer multimedia animasi visual dalam topik Pelan dan Dongakan dengan menerapkan kesemua elemen-elemen yang dapat membantu meningkatkan kemahiran visual iaitu elemen animasi, video, audio, grafik dan teks. Seterusnya, kajian kuasi eksperimental ini turut dijalankan bertujuan untuk mengetahui kesan penggunaan koswer multimedia animasi visual terhadap pencapaian pelajar bagi mata pelajaran Matematik di sekolah menengah. Ujian Pra dan Ujian Pos digunakan untuk melihat perbezaan pencapaian yang signifikan selepas menggunakan koswer multimedia animasi visual yang menggunakan teori Kognitif Visual Wiley. Responden yang terlibat dalam kajian ini ialah seramai 40 orang pelajar Tingkatan Lima yang dibahagikan kepada dua kumpulan iaitu kumpulan rawatan dan kumpulan kawalan yang dipilih daripada sebuah sekolah di daerah Batu Pahat, Johor. Hasil analisis menunjukkan peningkatan skor min markah bagi pelajar kumpulan rawatan. Hasil analisis ujian-t (paired-sample-t-test) membuktikan bahawa wujudnya perbezaan skor min markah yang signifikan di antara markah ujian pra dan markah ujian pos bagi kumpulan rawatan. Oleh itu, terdapat perbezaan yang signifikan di antara skor min markah ujian pra dan ujian pos bagi pelajar kumpulan rawatan selepas menggunakan koswer multimedia animasi visual. Manakala instrumen soal selidik yang digunakan untuk melihat tahap penerimaan pelajar selepas menggunakan koswer multimedia animasi visual berdasarkan tiga aspek iaitu aspek isi kandungan, aspek interaksi dan aspek persembahan telah memeperolehi skor min yang tinggi bagi ketiga-tiga aspek tersebut. Dapatan kajian ini menggambarkan penggunaan koswer multimedia animasi visual dapat membantu meningkatkan pencapaian Matematik di dalam bilik darjah terutama yang tidak melibatkan pengiraan

Solar Disinfection of Drinking Water with Polyethylene Terephthalate Bottles Coated with Nano-Titanium Dioxide

Water disinfection processes in the presence of titanium dioxide as a photo-catalyst material provide an interesting route to destroy contaminants, being operational in the UV-A domain with a potential use of solar radiation. In recent years, advanced oxidation processes (AOP) have been developed to meet the increasing need of an effective wastewater treatment. AOP generates powerful oxidizing agent hydroxyl radicals which completely destroy the pollutants in waste water. Solar disinfection of drinking water with polyethylene terephthalate (PET) bottles coated with photo-catalyst TiO2 has been shown to be very effective. The study is based on comparison between three systems for treating contaminated water samples using PET bottles. First system was a PET untreated bottle, the second system was a PET bottle coated with black paint on its outer surface. Finally the third system was a PET bottle coated also with a black coat on its outer surface and its inner part was treated with citric acid solution to enable np-TiO2 to cover the surface later on, then 0.2 g of np-TiO2 powder (of particle size <25 nm, Sigma-Aldrich) was added. The total bacterial accounts were determined to monitor the effect in the three systems. The experimental results have shown that disinfecting water with merely UV was less effective than combining the bottle with heat effect, and adding TiO2 film was further more benefited. This work can be applied in rural areas, with no technical support or need for expensive/dangerous chemicals for drinking safe water even if is stored for two days

Estimating average daily traffic using alternative method for single carriageway road in Southern Region Malaysia

Average Annual Daily Traffic (AADT) and Average Daily Traffic (ADT) are two parameters that are commonly required by traffic engineers and road designers to design and analyse the traffic operational performance of a road segment. In Malaysia, ADT is normally used to forecast the volume of traffic in the design year as well as to design the pavement thickness. Basically, ADT can be generated using expansion factor estimates from Peak Hour Volume (PHV). Current practice in Malaysia uses an expansion of 10% to estimate ADT from PHV. This paper discusses the results of a study carried out to establish a model for estimating ADT using PHV for single carriageway road. The 24-hours traffic data were collected at 9 sites in the districts of Johor, Malaysia for the period of 14 days. The 7-days data were used to establish the model and the other 7-days data were used to validate the model. For validation purposes, the absolute percent error (APE) for each estimate of ADT obtained from the model was calculated and compared with observed ADT. The statistical test at 95% confidence level was conducted to determine the significance difference between the ADT from actual data and the estimate ADT from model. The result shows that a power-formed trend line (y=axb) suits to the observed data with the coefficient of determination of about 0.90. Validation result shows that the ADT for the model has lesser APE compared with the ADT estimated using the factoring approach. A comparison of both estimated and actual ADT values using t-Test shows that there is no significant difference between the estimated ADT using models and the actual ADT. However, the ADT estimated using the expansion factor of 10% shows the vice versa. Such a finding implies that the model obtained from this study predicts ADT accurately than the current practice

Behavior of High-Strength Concrete Columns Reinforced with Galvanized Steel Equal-Angle Sections under Different Loading Conditions

Experimental results are presented for a new method of reinforcing concrete columns with galvanized steel equal-angle (GSEA) sections. For the same cross-sectional area, a GSEA section has a higher second moment of area than a conventional steel bar, which leads to a higher bending stiffness of the GSEA reinforced concrete member. In addition, the area of confined concrete is higher in GSEA reinforced concrete members than in steel bar reinforced members, which results in higher strength and ductility. The experimental program involved testing of 20 square, high-strength concrete (HSC) specimens under concentric axial load, eccentric axial load, and four-point loading. The specimens were reinforced longitudinally with either four N12 (12-mm-diameter deformed steel) bars or four GSEA sections and transversely with R10 (10-mm-diameter plain steel) bars. The specimens were 800 mm high with a 210 x 210 mm square cross section. Fifteen specimens were tested under either a concentric or eccentric axial load. The remaining five specimens were tested under four-point loading. Effects of the type of longitudinal reinforcement, spacing of transverse reinforcement, and loading conditions on the behavior of HSC specimens were investigated and discussed. Experimental results showed that, in general, specimens reinforced with GSEA sections had higher load-carrying capacities than the specimens reinforced with steel bars. In addition, the postpeak load-deformation behavior was observed to be more pronounced in specimens reinforced with GSEA sections than in specimens reinforced with steel bars

Quantization Error Minimization by Reducing Median Difference at Quantization Interval Class

In this paper, a new technique to define the size of quantization interval is defined. In general, high quantization error will occur if large interval is used at a large difference value class whereas low quantization error will occur if a small interval is used at a large difference value class. However, the existence of too many class intervals will lead to a higher system complexity. Thus, this research is mainly about designing a quantization algorithm that can provide an efficient interval as possible to reduce the quantization error. The novelty of the proposed algorithm is to utilize the high occurrence of zero coefficient by re-allocating the non-zero coefficient in a group for quantization. From the experimental results provided, this new algorithm is able to produce a high compressed image without compromising with the image quality

Axial Load and Bending Moment Behaviour of Square High Strength Concrete (HSC) Columns Reinforced with Steel Equal Angle (SEA) Sections

This paper presents the behaviour of square high-strength concrete (HSC) specimens reinforced longitudinally with steel equal angle (SEA) sections under different loading conditions. For the same cross-sectional area, a SEA section has a higher second moment of area than a steel bar, which results in a greater bending stiffness of the concrete member reinforced with SEA sections. Also, the area of confined concrete is greater in concrete members reinforced with SEA sections compared to members reinforced with steel bars, which results in higher strength and ductility. A total of 8 specimens of 210 mm square cross-section and 800 mm height were constructed and tested. The specimens were divided into two groups with four specimens in each group. Group R-S50 specimens serve as the reference group and were reinforced longitudinally with four N12 (12 mm diameter) deformed steel bars. Group A30-S50 specimens were reinforced longitudinally with four A30 (29.1 mm x 29.1 mm x 2.25 mm) SEA sections. All specimens were reinforced laterally with R10 (10 mm diameter) plain steel bars and spaced at 50 mm centres. The main variables considered in the study included the type of longitudinal reinforcement and the magnitude of load eccentricity. It was obtained from the experimental results that specimens reinforced longitudinally with SEA sections showed greater ductility compared to specimens reinforced longitudinally with steel bars under different loading conditions

Pengembangan Media Audio Visual Untuk Perolehan Kosa Kata Anak Usia Dini

The purpose of this research is to find a profile view of relevant audio-visual media for the acquisition of vocabulary early childhood, found a pattern group of words that are relevant to the type of early childhood by living environments, finding systematic kind of a group of words that are relevant to the acquisition of vocabulary early childhood. Research conducted research and development approach. Data collection techniques in this research through observation and interviews. The results showed that the appearance of the media profile contains elements such as text, images, animation, and audio. The group said in early childhood began to get to know members of the body, recognize family members, knowing the types of food, familiar bedding, knowing the type of animals and vehicles with patterns of a group of words that correspond to Indonesian rule that pattern Explained - Describe (D - M ), systematic type group said in early childhood classified in the group of words that element type nouns, verbs and adjectives