Macro- and micro-strain in GaN nanowires on Si(111)

We analyze the strain state of GaN nanowire ensembles by x-ray diffraction. The nanowires are grown by molecular beam epitaxy on a Si(111) substrate in a self-organized manner. On a macroscopic scale, the nanowires are found to be free of strain. However, coalescence of the nanowires results in micro-strain with a magnitude from +-0.015% to +-0.03%.This micro-strain contributes to the linewidth observed in low-temperature photoluminescence spectra

Determination of trace elements in the plants of Mt. Bozdag, Izmir, Turkey

The aim of this study was to determine the current level of atmospheric heavy metal content on the Bozdag Mountain of the Aegean Region, Turkey. Twenty nine different plants were selected to study their potential as biomonitors of trace elements such as Ni, Zn, Fe, Pb, Mn and Cd (μg g-1, dry weight). The samples were collected from two different altitudes of Mt. Bozdag. The concentrations of trace elements were determined by atomic absorption spectrometry. The mean concentrations determined at 1000 m altitude ranged from 0.025 to 1.609, 0.232 to 0.731, 0.578 to 5.983, 0.287 to 0.565 and 0.176 to 2.659 (μg g-1, dry weight), for Ni, Zn, Fe, Pb and Mn, respectively. At the altitude of 1600 m, the values ranged from 0.023 to 0.939, 0.258 to 1.254, 0.839 to 5.176, 0.301 to 1.341 and 0.405 to 3.351 (μg g-1, dry weight) for Ni, Zn, Fe, Pb and Mn, respectively. No Cd was detected at either altitude. Statistical significance was determined by the independent sample t-test and comparisons were made in order to determine if there were any differences between the averages of herbaceous and woody plants.

An inverse optimization strategy to determine single crystal mechanical behavior from polycrystal tests: Application to AZ31 Mg alloy

An inverse optimization strategy was developed to determine the single crystal properties from experimental results of the mechanical behavior of polycrystals. The polycrystal behavior was obtained by means of the finite element simulation of a representative volume element of the microstructure in which the dominant slip and twinning systems were included in the constitutive equation of each grain. The inverse problem was solved by means of the Levenberg-Marquardt method, which provided an excellent fit to the experimental results. The iterative optimization process followed a hierarchical scheme in which simple representative volume elements were initially used, followed by more realistic ones to reach the final optimum solution, leading to important reductions in computer time. The new strategy was applied to identify the initial and saturation critical resolved shear stresses and the hardening modulus of the active slip systems and extension twinning in a textured AZ31 Mg alloy. The results were in general agreement with the data in the literature but also showed some differences. They were partially explained because of the higher accuracy of the new optimization strategy but it was also shown that the number of independent experimental stress-strain curves used as input is critical to reach an accurate solution to the inverse optimization problem. It was concluded that at least three independent stress-strain curves are necessary to determine the single crystal behavior from polycrystal tests in the case of highly textured Mg alloys

Formation of silicon nanocrystals in sapphire by ion implantation and the origin of visible photoluminescence

Cataloged from PDF version of article.Silicon nanocrystals, average sizes ranging between 3 and 7 nm, were formed in sapphire matrix by ion implantation and subsequent annealing. Evolution of the nanocrystals was detected by Raman spectroscopy and x-ray diffraction (XRD). Raman spectra display that clusters in the matrix start to form nanocrystalline structures at annealing temperatures as low as 800 degrees C in samples with high dose Si implantation. The onset temperature of crystallization increases with decreasing dose. Raman spectroscopy and XRD reveal gradual transformation of Si clusters into crystalline form. Visible photoluminescence band appears following implantation and its intensity increases with subsequent annealing process. While the center of the peak does not shift, the intensity of the peak decreases with increasing dose. The origin of the observed photoluminescence is discussed in terms of radiation induced defects in the sapphire matrix. (c) 2006 American Institute of Physics

Effects of hydrostatic and uniaxial stress on the Schottky barrier heights of Ga-polarity and N-polarity n-GaN

We report measurements of the Schottky barrier heights of Ni/Au contacts on Ga-polarity and N-polarity n-GaN under hydrostatic pressure and applied in-plane uniaxial stress. Under hydrostatic pressure the two different polarities of GaN yield significantly different rates of Schottky barrier height increase with increasing pressure. Uniaxial stress parallel to the surface affects the Schottky barrier height only minimally. The observed changes in barrier height under stress are attributed to a combination of band structure and piezoelectric effects

A new modelling approach of evaluating preventive and reactive strategies for mitigating supply chain risks

Supply chains are becoming more complex and vulnerable due to globalization and interdependency between different risks. Existing studies have focused on identifying different preventive and reactive strategies for mitigating supply chain risks and advocating the need for adopting specific strategy under a particular situation. However, current research has not addressed the issue of evaluating an optimal mix of preventive and reactive strategies taking into account their relative costs and benefits within the supply network setting of interconnected firms and organizations. We propose a new modelling approach of evaluating different combinations of such strategies using Bayesian belief networks. This technique helps in determining an optimal solution on the basis of maximum improvement in the network expected loss. We have demonstrated our approach through a simulation study and discussed practical and managerial implications

Solar axion search with the CAST experiment

The CAST (CERN Axion Solar Telescope) experiment is searching for solar axions by their conversion into photons inside the magnet pipe of an LHC dipole. The analysis of the data recorded during the first phase of the experiment with vacuum in the magnet pipes has resulted in the most restrictive experimental limit on the coupling constant of axions to photons. In the second phase, CAST is operating with a buffer gas inside the magnet pipes in order to extent the sensitivity of the experiment to higher axion masses. We will present the first results on the $^{4}{\rm He}$ data taking as well as the system upgrades that have been operated in the last year in order to adapt the experiment for the $^{3}{\rm He}$ data taking. Expected sensitivities on the coupling constant of axions to photons will be given for the recent $^{3}{\rm He}$ run just started in March 2008.Comment: Proceedings of the ICHEP 2008 conferenc

Search for low Energy solar Axions with CAST

We have started the development of a detector system, sensitive to single photons in the eV energy range, to be suitably coupled to one of the CAST magnet ports. This system should open to CAST a window on possible detection of low energy Axion Like Particles emitted by the sun. Preliminary tests have involved a cooled photomultiplier tube coupled to the CAST magnet via a Galileian telescope and a switched 40 m long optical fiber. This system has reached the limit background level of the detector alone in ideal conditions, and two solar tracking runs have been performed with it at CAST. Such a measurement has never been done before with an axion helioscope. We will present results from these runs and briefly discuss future detector developments.Comment: Paper submitted to the proceedings of the "4th Patras Workshop on Axions, WIMPs and WISPs", DESY, Hamburg Site - Germany, 18-21 June 2008. Author affiliations are reported on the title page of the paper. In version 2: 1 affiliation change, 3 references adde

Bulk viscosity in 2SC quark matter

The bulk viscosity of three-flavor color-superconducting quark matter originating from the nonleptonic process u+s u+d is computed. It is assumed that up and down quarks form Cooper pairs while the strange quark remains unpaired (2SC phase). A general derivation of the rate of strangeness production is presented, involving contributions from a multitude of different subprocesses, including subprocesses that involve different numbers of gapped quarks as well as creation and annihilation of particles in the condensate. The rate is then used to compute the bulk viscosity as a function of the temperature, for an external oscillation frequency typical of a compact star r-mode. We find that, for temperatures far below the critical temperature T_c for 2SC pairing, the bulk viscosity of color-superconducting quark matter is suppressed relative to that of unpaired quark matter, but for T >~ 10^(-3) T_c the color-superconducting quark matter has a higher bulk viscosity. This is potentially relevant for the suppression of r-mode instabilities early in the life of a compact star.Comment: 18 pages + appendices (28 pages total), 8 figures; v3: corrected numerical error in the plots; 2SC bulk viscosity is now larger than unpaired bulk viscosity in a wider temperature rang