20 research outputs found
Using UAV to Identify the Optimal Vegetation Index for Yield Prediction of Oil Seed Rape (Brassica napus L.) at the Flowering Stage
Suitability of the vegetation indices of normalized difference vegetation index (NDVI), blue normalized difference vegetation index (BNDVI), and normalized difference yellowness index (NDYI) obtained by means of UAV at the flowering stage of oil seed rape for the prediction of seed yield and usability of these vegetation indices in the identification of anomalies in the condition of the flowering growth were verified based on the regression analysis. Correlation analysis was performed to find the degree of yield dependence on the values of NDVI, BNDVI, and NDYI indices, which revealed a strong, significant linear positive dependence of seed yield on BNDVI (R = 0.98) and NDYI (R = 0.95). The level of correlation between the NDVI index and the seed yield was weaker (R = 0.70) than the others. Regression analysis was performed for a closer determination of the functional dependence of NDVI, BNDVI, and NDYI indices and the yield of seeds. Coefficients of determination in the linear regression model of NDVI, BNDVI, and NDYI indices reached the following values: R2 = 0.48 (NDVI), R2 = 0.95 (BNDVI), and R2 = 0.90 (NDYI). Thus, it was shown that increased density of yellow flowers decreased the relationship between NDVI and crop yield. The NDVI index is not appropriate for assessing growth conditions and prediction of yields at the flowering stage of oil seed rape. High accuracy of yield prediction was achieved with the use of BNDVI and NDYI. The performed analysis of NDVI, BNDVI, and NDYI demonstrated that particularly the BNDVI and NDYI indices can be used to identify problems in the development of oil seed rape growth at the stage of flowering, for their precise localization, and hence to targeted and effective remedial measures in line with the principles of precision agriculture.O
Anaerobic Fermentation of Silage from the Above-Ground Biomass of Jerusalem Artichoke (Helianthus tuberosus L.) and Maize (Zea mayse L.) as a New and Promising Input Raw Material for Biogas Production
Research of new input raw materials for biogas plants is a very actual topic. There are only a very few studies dealing with the possibility of using silage prepared from the above-ground parts of the Jerusalem artichoke (Helianthus tuberosus L.) and maize (Zea mayse L.) for methane production. This study deals with the determination of methane production and methane content in biogas during the fermentation of maize silage with dissimilar additions of the biomass of the Jerusalem artichoke (JA). Except for the effect of the JA's addition on the yield of methane, we also studied its potential influence on the inhibition of the process of anaerobic digestion and the bacterial and methanogenic archaeal composition of anaerobic digestate. There were five model silages prepared; two of them contained only maize or JAs, and the remaining three were mixtures of maize and JA silages (30%wt; 50%wt and 70%wt). The fermentation tests showed that the JA addition (from 30 to 70%wt) resulted in the production of biogas decreasing, on average, by 15%. Based on the performed metagenomic analysis, we cannot confirm an essential influence of JA biomass addition on the composition of the community of microorganisms during fermentation.O
Effect of Seed Coating and PEG-Induced Drought on the Germination Capacity of Five Clover Crops
The effect of coating the seed of clover crops by water absorbing seed process (WASP) technology pelletization on its germination capacity was studied in conditions of diverse drought intensities simulated by different concentrations of polyethylenglycol (PEG) 8000 solution. Drought resistance was monitored in the seed of five fodder clover species: Anthyllis vulneraria L., Medicago lupulina L., Trifolium repens L., Melilotus albus Medik. and Onobrychis viciifolia Scop. In the seed of given plant species, germination capacity was determined along with the share of dead and hard seeds. Although the coating significantly (p < 0.05) affected the drought resistance of seeds, the germination capacity increased only in conditions of milder drought (simulation with PEG: 0.1-0.3 mol). With the increasing intensity of drought induced by higher PEG concentrations (0.4-0.7 mol) the number of germinable seeds demonstrably decreased and the number of dead seeds increased in the coated seed as compared with the uncoated seed. The coated seed can be appropriate for use in M. lupulina, M. albus and T. repens, while the uncoated seed can be used in A. vulneraria and O. viciifolia
The Election Campaigning and 2016 Regional Election in the Czech Republic
This thesis analyzes the election campaigns of six parties and movements (ANO 2011, ČSSD, TOP 09, ODS, KSČM, KDU-CSL) and one coalition (SPD-SPO). The aim of the diploma thesis is to analyze the election campaigns before the regional councils, which took place on 7.10. - 8.10.2016. In terms of methodology, qualitative research was applied in the diploma thesis. The first part of the thesis focuses on political marketing, which was used in the regional elections in 2016. The second part of the thesis deals with the campaigns of five parties of one movement and one coalition. Political parties have used various forms of political marketing in their campaigns. Elections to regional assemblies did not have one crucial topic to unify the entire political spectrum. Not even within the opposition was a single unifying theme linking the opposition against the government. Each political party chose its sub-theme. All parties had a centralized campaign. CSSD, KDU-ČSL and TOP 09 had a centralized campaign in part. Political party budgets ranged from 16 to 111 million. The least invested in the SPD-SPO coalition and most of the hnutí ANO 2011
Political marketing party ANO
Hlavním cílem předložené bakalářské práce je poskytnout analýzu politického marketingu hnutí ANO. Důraz je kladen hlavně na předvolební kampaň, která probíhala v roce 2013. Část práce, která se věnuje předvolební kampani je z hlediska přehlednosti rozdělena do několika částí, a to na sociální sítě a online marketing, kontaktní kampaň, outdoorovou kampaň a na jiné formy kampaně. Práce zároveň popisuje historii hnutí ANO a ukazuje proměnu loga, kterou hnutí ANO během svého působení udělalo. V závěru se práce snaží poskytnout odpověď na to jaké všechny skutečnosti vedly k úspěchu hnutí ANO a také se snaží zanalyzovat nové marketingové prvky, které hnutí ANO použilo.ObhájenoThe main aim of the bachelor thesis is to provide an analysis of political marketing of ANO. The emphasis is placed primarily on the election campaign, which took place in 2013. The part of the work, which is focused on the election campaign in terms of clarity is divided into several parts, which are the social networking and online marketing, contact campaign, outdoor campaign and other forms of campaigns. The work also describes the history of ANO and shows the transformation of logo, which ANO has made during his tenure. The conclusion of the thesis tries to provide an answer to what all the facts have led to the success of ANO and also tries to analyze new marketing elements that ANO has used
Political marketing party ANO
Hlavním cílem předložené bakalářské práce je poskytnout analýzu politického marketingu hnutí ANO. Důraz je kladen hlavně na předvolební kampaň, která probíhala v roce 2013. Část práce, která se věnuje předvolební kampani je z hlediska přehlednosti rozdělena do několika částí, a to na sociální sítě a online marketing, kontaktní kampaň, outdoorovou kampaň a na jiné formy kampaně. Práce zároveň popisuje historii hnutí ANO a ukazuje proměnu loga, kterou hnutí ANO během svého působení udělalo. V závěru se práce snaží poskytnout odpověď na to jaké všechny skutečnosti vedly k úspěchu hnutí ANO a také se snaží zanalyzovat nové marketingové prvky, které hnutí ANO použilo.ObhájenoThe main aim of the bachelor thesis is to provide an analysis of political marketing of ANO. The emphasis is placed primarily on the election campaign, which took place in 2013. The part of the work, which is focused on the election campaign in terms of clarity is divided into several parts, which are the social networking and online marketing, contact campaign, outdoor campaign and other forms of campaigns. The work also describes the history of ANO and shows the transformation of logo, which ANO has made during his tenure. The conclusion of the thesis tries to provide an answer to what all the facts have led to the success of ANO and also tries to analyze new marketing elements that ANO has used
Q-STRESS v.1.0–a Tool for Determination of Stress Fields Using Digital Image Correlation Systems
AbstractThe contribution deals with a description of noncommercial program, created for digital image correlation systems Dantec Dynamics. Described version of this product called Q-STRESS v.1.0 processes data exported from the software delivered together with correlation systems and allows fast and simply visualize displacement or strain fields and calculate the further to the stress fields. Moreover in chosen points the program allows depict the courses of displacements, strains as well as stresses during the loading process. In this contribution the description of the program is supplemented by its practical application in investigation of stress fields in the surroundings of small hole. Version 1.0 is created only for the analyses in elastic domain
The Possibilities in Use of ESPI Method by Investigation of Strain Fields of Specimen with Stress Concentrator
Abstract The analysis of sheets deformation and corresponding knowledge of their elastic and plastic properties has a great meaning by their following processing. The aim of this contribution is to focus on the description of use an optical ESPI system Q-300 Dantec Dynamics by investigation of elastic deformations of sheets with stress concentrators in a form of notch. The results obtained experimentally using mentioned measuring device were verified numerically in program Ansys Workbench. The paper briefly describes the methodologies of both, experimental and numerical, types of modeling. Keyword
Using High-speed Digital Image Correlation to Determine the Damping Ratio
AbstractThe article deals with the possibility of using digital image correlation method in experimental determining of damping ratio. The essence of the article is a proposal of algorithm for the processing of a time responses measured by correlation system Q-450 Dantec Dynamics. The algorithm uses a Fast Fourier Transformation and bandwidth method to calculate a damping ratio. The output is a graphical representation of the value of damping ratio for given natural frequency of the test object. The article presents the method of verification by testing algorithm on numerical models and its practical application in determining the value of damping ratio of a specimen material
Design and strength analysis of C-hook for load using the finite element method
The special type of C-hook is investigated in this paper. The C-hook is designed to carry a special load, where is not possible to use classical hooks or chain slings. The designed hook is consisted of two arms that ensure the stability of the load being carried. The finite element analysis is performed for the control of the stress and deformation state in the whole hook. The fatigue analysis is performed for the check of a lifetime of C-hook