13,128 research outputs found
Scientific basis for safely shutting in the Macondo Well after the April 20, 2010 Deepwater Horizon blowout
As part of the government response to the Deepwater Horizon blowout, a Well Integrity Team evaluated the geologic hazards of shutting in the Macondo Well at the seafloor and determined the conditions under which it could safely be undertaken. Of particular concern was the possibility that, under the anticipated high shut-in pressures, oil could leak out of the well casing below the seafloor. Such a leak could lead to new geologic pathways for hydrocarbon release to the Gulf of Mexico. Evaluating this hazard required analyses of 2D and 3D seismic surveys, seafloor bathymetry, sediment properties, geophysical well logs, and drilling data to assess the geological, hydrological, and geomechanical conditions around the Macondo Well. After the well was successfully capped and shut in on July 15, 2010, a variety of monitoring activities were used to assess subsurface well integrity. These activities included acquisition of wellhead pressure data, marine multichannel seismic pro- files, seafloor and water-column sonar surveys, and wellhead visual/acoustic monitoring. These data showed that the Macondo Well was not leaking after shut in, and therefore, it could remain safely shut until reservoir pressures were suppressed (killed) with heavy drilling mud and the well was sealed with cement
Toeplitz Inverse Covariance-Based Clustering of Multivariate Time Series Data
Subsequence clustering of multivariate time series is a useful tool for
discovering repeated patterns in temporal data. Once these patterns have been
discovered, seemingly complicated datasets can be interpreted as a temporal
sequence of only a small number of states, or clusters. For example, raw sensor
data from a fitness-tracking application can be expressed as a timeline of a
select few actions (i.e., walking, sitting, running). However, discovering
these patterns is challenging because it requires simultaneous segmentation and
clustering of the time series. Furthermore, interpreting the resulting clusters
is difficult, especially when the data is high-dimensional. Here we propose a
new method of model-based clustering, which we call Toeplitz Inverse
Covariance-based Clustering (TICC). Each cluster in the TICC method is defined
by a correlation network, or Markov random field (MRF), characterizing the
interdependencies between different observations in a typical subsequence of
that cluster. Based on this graphical representation, TICC simultaneously
segments and clusters the time series data. We solve the TICC problem through
alternating minimization, using a variation of the expectation maximization
(EM) algorithm. We derive closed-form solutions to efficiently solve the two
resulting subproblems in a scalable way, through dynamic programming and the
alternating direction method of multipliers (ADMM), respectively. We validate
our approach by comparing TICC to several state-of-the-art baselines in a
series of synthetic experiments, and we then demonstrate on an automobile
sensor dataset how TICC can be used to learn interpretable clusters in
real-world scenarios.Comment: This revised version fixes two small typos in the published versio
Non-linear complex principal component analysis of nearshore bathymetry
International audienceComplex principal component analysis (CPCA) is a useful linear method for dimensionality reduction of data sets characterized by propagating patterns, where the CPCA modes are linear functions of the complex principal component (CPC), consisting of an amplitude and a phase. The use of non-linear methods, such as the neural-network based circular non-linear principal component analysis (NLPCA.cir) and the recently developed non-linear complex principal component analysis (NLCPCA), may provide a more accurate description of data in case the lower-dimensional structure is non-linear. NLPCA.cir extracts non-linear phase information without amplitude variability, while NLCPCA is capable of extracting both. NLCPCA can thus be viewed as a non-linear generalization of CPCA. In this article, NLCPCA is applied to bathymetry data from the sandy barred beaches at Egmond aan Zee (Netherlands), the Hasaki coast (Japan) and Duck (North Carolina, USA) to examine how effective this new method is in comparison to CPCA and NLPCA.cir in representing propagating phenomena. At Duck, the underlying low-dimensional data structure is found to have linear phase and amplitude variability only and, accordingly, CPCA performs as well as NLCPCA. At Egmond, the reduced data structure contains non-linear spatial patterns (asymmetric bar/trough shapes) without much temporal amplitude variability and, consequently, is about equally well modelled by NLCPCA and NLPCA.cir. Finally, at Hasaki, the data structure displays not only non-linear spatial variability but also considerably temporal amplitude variability, and NLCPCA outperforms both CPCA and NLPCA.cir. Because it is difficult to know the structure of data in advance as to which one of the three models should be used, the generalized NLCPCA model can be used in each situation
Polarimetry and photometry of the peculiar main-belt object 7968 = 133P/Elst-Pizarro
133P/Elst-Pizarro is an object that has been described as either an active
asteroid or a cometary object in the main asteroid belt. Here we present a
photometric and polarimetric study of this object in an attempt to infer
additional information about its origin.
With the FORS1 instrument of the ESO VLT, we have performed during the 2007
apparition of 133P/Elst-Pizarro quasi-simultaneous photometry and polarimetry
of its nucleus at nine epochs in the phase angle range 0 - 20 deg. For each
observing epoch, we also combined all available frames to obtain a deep image
of the object, to seek signatures of weak cometary activity. Polarimetric data
were analysed by means of a novel physical interference modelling.
The object brightness was found to be highly variable over timescales <1h, a
result fully consistent with previous studies. Using the albedo-polarization
relationships for asteroids and our photometric results, we found for our
target an albedo of about 0.06-0.07 and a mean radius of about 1.6 km.
Throughout the observing epochs, our deep imaging of the comet detects a tail
and an anti-tail. Their temporal variations are consistent with an activity
profile starting around mid May 2007 of minimum duration of four months. Our
images show marginal evidence of a coma around the nucleus. The overall light
scattering behaviour (photometry and polarimetry) resembles most closely that
of F-type asteroids.Comment: Accepted by Astronomy and Astrophysic
The activation energy for GaAs/AlGaAs interdiffusion
Copyright 1997 American Institute of Physics. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics. This article appeared in Journal of Applied Physics 82, 4842 (1997) and may be found at
Validation of nonlinear PCA
Linear principal component analysis (PCA) can be extended to a nonlinear PCA
by using artificial neural networks. But the benefit of curved components
requires a careful control of the model complexity. Moreover, standard
techniques for model selection, including cross-validation and more generally
the use of an independent test set, fail when applied to nonlinear PCA because
of its inherent unsupervised characteristics. This paper presents a new
approach for validating the complexity of nonlinear PCA models by using the
error in missing data estimation as a criterion for model selection. It is
motivated by the idea that only the model of optimal complexity is able to
predict missing values with the highest accuracy. While standard test set
validation usually favours over-fitted nonlinear PCA models, the proposed model
validation approach correctly selects the optimal model complexity.Comment: 12 pages, 5 figure
An upper limit for the water outgassing rate of the main-belt comet 176P/LINEAR observed with Herschel/HIFI
176P/LINEAR is a member of the new cometary class known as main-belt comets
(MBCs). It displayed cometary activity shortly during its 2005 perihelion
passage that may be driven by the sublimation of sub-surface ices. We have
therefore searched for emission of the H2O 110-101 ground state rotational line
at 557 GHz toward 176P/LINEAR with the Heterodyne Instrument for the Far
Infrared (HIFI) on board the Herschel Space Observatory on UT 8.78 August 2011,
about 40 days after its most recent perihelion passage, when the object was at
a heliocentric distance of 2.58 AU. No H2O line emission was detected in our
observations, from which we derive sensitive 3-sigma upper limits for the water
production rate and column density of < 4e25 molec/s and of < 3e10 cm^{-2},
respectively. From the peak brightness measured during the object's active
period in 2005, this upper limit is lower than predicted by the relation
between production rates and visual magnitudes observed for a sample of comets
by Jorda et al. (2008) at this heliocentric distance. Thus, 176P/LINEAR was
likely less active at the time of our observation than during its previous
perihelion passage. The retrieved upper limit is lower than most values derived
for the H2O production rate from the spectroscopic search for CN emission in
MBCs.Comment: 5 pages, 2 figures. Minor changes to match published versio
Coexistence of the topological state and a two-dimensional electron gas on the surface of Bi2Se3
Topological insulators are a recently discovered class of materials with
fascinating properties: While the inside of the solid is insulating,
fundamental symmetry considerations require the surfaces to be metallic. The
metallic surface states show an unconventional spin texture, electron dynamics
and stability. Recently, surfaces with only a single Dirac cone dispersion have
received particular attention. These are predicted to play host to a number of
novel physical phenomena such as Majorana fermions, magnetic monopoles and
unconventional superconductivity. Such effects will mostly occur when the
topological surface state lies in close proximity to a magnetic or electric
field, a (superconducting) metal, or if the material is in a confined geometry.
Here we show that a band bending near to the surface of the topological
insulator BiSe gives rise to the formation of a two-dimensional
electron gas (2DEG). The 2DEG, renowned from semiconductor surfaces and
interfaces where it forms the basis of the integer and fractional quantum Hall
effects, two-dimensional superconductivity, and a plethora of practical
applications, coexists with the topological surface state in BiSe. This
leads to the unique situation where a topological and a non-topological, easily
tunable and potentially superconducting, metallic state are confined to the
same region of space.Comment: 12 pages, 3 figure
- …