A small segmented oscillating water column using a savonius rotor turbine

This paper outlines a project which addresses the use of a small segmented oscillating water column with three sections. The turbine utilises cascaded Savonius rotors (one for each section) and this system is developed and tested for validation of the performance algorithms. It is shown that the systems can be easily described and a system developed that can generate. It would be suitable for a shoreline location such as a harbour wall, where waves are random and not orthogonal to the column. Conversion rates in the region of 20 % are tabulated for the system with an output of 25 W peak. The paper will give a full algorithm for the system while the digest outlines some crucial points with regards to the sizing and operation of the column with respect to the wave frequency and wavelength. The turbine is fully characterized - the generator is a brushless permanent magnet machine connected to a diode bridge rectifier and variable load. © 2008 IEEE

Design of large power surface-mounted permanent-magnet motors using post-assembly magnetization

This paper reports the design process for the manufacture of higher power rare-earth permanent-magnet motors using post-assembly magnetization. With these machines, difficulties can be encountered in production using normal manufacturing processes due to the high intensity of rare-earth magnets that are pre-magnetized. Post-assembly magnetization utilizes the stator windings of a permanent-magnet motor to magnetize the magnets after complete assembly (so that the problem can be solved). However, with post-assembly magnetization, some parameters such as slot-fill factor, number of turns, wire diameter, etc., must be considered for the magnetization, as well as the motor operation. The machine design should be able to meet the required specification as a motor and ensure correct magnetization is possible. In this paper, a design process is described that incorporates the design considerations for post-assembly magnetization (for the requirements for complete magnetization) together with the design requirements for successful motor operation. A 6kW surface-mounted permanent-magnet motor is designed using the proposed process, and finite element analysis verifies the feasibility of the presented method. ©2007 IEEE

Inductive Charging Coupler with Assistive Coils

© 2016 IEEE. A wireless charging system contains a high-frequency power source, a wireless transformer/coupler, a rectifier, and the load. The wireless transformer/coupler is the key element of the wireless charging system, and the power source and the rectifier design are all dependent on its design. For a two coil type wireless transformer, the maximum efficiency is limited by the coupling coefficient, which rapidly decreases with increasing distance between the primary and secondary coils. The four coil system is widely used in low-power applications, where the maximum power transfer operating point is away from the maximum efficiency point. This paper proposes an inductive charging coupler with small assistive coils, where the high power and maximum efficiency regions overlap

Gait analyses of parkinson’s disease patients using multiscale entropy

Copyright: © 2021 by the author(s). Parkinson’s disease (PD) is a type of neurodegenerative diseases. PD influences gait in many aspects: reduced gait speed and step length, increased axial rigidity, and impaired rhythmicity. Gait-related data used in this study are from PhysioNet. Twenty-one PD patients and five healthy controls (CO) were sorted into four groups: PD without task (PDw), PD with dual task (PDd), control without task (COw), and control with dual task (COd). Since dual task actions are attention demanding, either gait or cognitive function may be affected. To quantify the used walking data, eight pressure sensors installed in each insole are used to measure the vertical ground reaction force. Thus, quantitative measurement analysis is performed utilizing multiscale entropy (MSE) and complexity index (CI) to analyze and differentiate between the ground reaction force of the four different groups. Results show that the CI of patients with PD is higher than that of CO and 11 of the sensor signals are statistically significant (p < 0.05). The COd group has larger CI values at the beginning (p = 0.021) but they get lower at the end of the test (p = 0.000) compared to that in the COw group. The end-of-test CI for the PDw group is lower in one of the feet sensor signals, and in the right total ground reaction force compared to the PDd group counterparts. In conclusion, when people start to adjust their gait due to pathology or stress, CI may increase first and reach a peak, but it decreases afterward when stress or pathology is further increased

Topological Surface States Protected From Backscattering by Chiral Spin Texture

Topological insulators are a new class of insulators in which a bulk gap for electronic excitations is generated by strong spin orbit coupling. These novel materials are distinguished from ordinary insulators by the presence of gapless metallic boundary states, akin to the chiral edge modes in quantum Hall systems, but with unconventional spin textures. Recently, experiments and theoretical efforts have provided strong evidence for both two- and three-dimensional topological insulators and their novel edge and surface states in semiconductor quantum well structures and several Bi-based compounds. A key characteristic of these spin-textured boundary states is their insensitivity to spin-independent scattering, which protects them from backscattering and localization. These chiral states are potentially useful for spin-based electronics, in which long spin coherence is critical, and also for quantum computing applications, where topological protection can enable fault-tolerant information processing. Here we use a scanning tunneling microscope (STM) to visualize the gapless surface states of the three-dimensional topological insulator BiSb and to examine their scattering behavior from disorder caused by random alloying in this compound. Combining STM and angle-resolved photoemission spectroscopy, we show that despite strong atomic scale disorder, backscattering between states of opposite momentum and opposite spin is absent. Our observation of spin-selective scattering demonstrates that the chiral nature of these states protects the spin of the carriers; they therefore have the potential to be used for coherent spin transport in spintronic devices.Comment: to be appear in Nature on August 9, 200

The Main Belt Comets and ice in the Solar System

We review the evidence for buried ice in the asteroid belt; specifically the questions around the so-called Main Belt Comets (MBCs). We summarise the evidence for water throughout the Solar System, and describe the various methods for detecting it, including remote sensing from ultraviolet to radio wavelengths. We review progress in the first decade of study of MBCs, including observations, modelling of ice survival, and discussion on their origins. We then look at which methods will likely be most effective for further progress, including the key challenge of direct detection of (escaping) water in these bodies

Automated Left Ventricle Segmentation in Echocardiography Using YOLO: A Deep Learning Approach for Enhanced Cardiac Function Assessment

Data Availability Statement: The data presented in this study are available on request from the corresponding author.Accurate segmentation of the left ventricle (LV) using echocardiogram (Echo) images is essential for cardiovascular analysis. Conventional techniques are labor-intensive and exhibit inter-observer variability. Deep learning has emerged as a powerful tool for automated medical image segmentation, offering advantages in speed and potentially superior accuracy. This study explores the efficacy of employing a YOLO (You Only Look Once) segmentation model for automated LV segmentation in Echo images. YOLO, a cutting-edge object detection model, achieves exceptional speed–accuracy balance through its well-designed architecture. It utilizes efficient dilated convolutional layers and bottleneck blocks for feature extraction while incorporating innovations like path aggregation and spatial attention mechanisms. These attributes make YOLO a compelling candidate for adaptation to LV segmentation in Echo images. We posit that by fine-tuning a pre-trained YOLO-based model on a well-annotated Echo image dataset, we can leverage the model’s strengths in real-time processing and precise object localization to achieve robust LV segmentation. The proposed approach entails fine-tuning a pre-trained YOLO model on a rigorously labeled Echo image dataset. Model performance has been evaluated using established metrics such as mean Average Precision (mAP) at an Intersection over Union (IoU) threshold of 50% (mAP50) with 98.31% and across a range of IoU thresholds from 50% to 95% (mAP50:95) with 75.27%. Successful implementation of YOLO for LV segmentation has the potential to significantly expedite and standardize Echo image analysis. This advancement could translate to improved clinical decision-making and enhanced patient care.This research received no external funding

Centre selection for clinical trials and the generalisability of results: a mixed methods study.

BACKGROUND: The rationale for centre selection in randomised controlled trials (RCTs) is often unclear but may have important implications for the generalisability of trial results. The aims of this study were to evaluate the factors which currently influence centre selection in RCTs and consider how generalisability considerations inform current and optimal practice. METHODS AND FINDINGS: Mixed methods approach consisting of a systematic review and meta-summary of centre selection criteria reported in RCT protocols funded by the UK National Institute of Health Research (NIHR) initiated between January 2005-January 2012; and an online survey on the topic of current and optimal centre selection, distributed to professionals in the 48 UK Clinical Trials Units and 10 NIHR Research Design Services. The survey design was informed by the systematic review and by two focus groups conducted with trialists at the Birmingham Centre for Clinical Trials. 129 trial protocols were included in the systematic review, with a total target sample size in excess of 317,000 participants. The meta-summary identified 53 unique centre selection criteria. 78 protocols (60%) provided at least one criterion for centre selection, but only 31 (24%) protocols explicitly acknowledged generalisability. This is consistent with the survey findings (n = 70), where less than a third of participants reported generalisability as a key driver of centre selection in current practice. This contrasts with trialists' views on optimal practice, where generalisability in terms of clinical practice, population characteristics and economic results were prime considerations for 60% (n = 42), 57% (n = 40) and 46% (n = 32) of respondents, respectively. CONCLUSIONS: Centres are rarely enrolled in RCTs with an explicit view to external validity, although trialists acknowledge that incorporating generalisability in centre selection should ideally be more prominent. There is a need to operationalize 'generalisability' and incorporate it at the design stage of RCTs so that results are readily transferable to 'real world' practice

Electrical behaviour, characteristics and properties of anodic aluminium oxide films coloured by nickel electrodeposition

Porous anodic films on 1050 aluminium substrate were coloured by AC electrodeposition of nickel. Several experiments were performed at different deposition voltages and nickel concentrations in the electrolyte in order to correlate the applied electrical power to the electrical behaviour, as well as the characteristics and properties of the coatings. The content of nickel inside the coatings reached 1.67 g/m2, depending on the experimental conditions. According to the applied AC voltage in comparison with the threshold voltage Ut, the coating either acted only as a capacitor when U\Ut and, when U[Ut, the behaviour during the anodic and cathodic parts of the power sine wave was different. In particular, due to the semi-conducting characteristics of the barrier layer, additional oxidation of the aluminium substrate occurred during the anodic part of the electrical signal, whilst metal deposition (and solvent reduction) occurred during the cathodic part; these mechanisms correspond to the blocked and pass directions of the barrier layer/electrolyte junction, respectively

Protein profiling in hepatocellular carcinoma by label-free quantitative proteomics in two west african populations.

Background Hepatocellular Carcinoma is the third most common cause of cancer related death worldwide, often diagnosed by measuring serum AFP; a poor performance stand-alone biomarker. With the aim of improving on this, our study focuses on plasma proteins identified by Mass Spectrometry in order to investigate and validate differences seen in the respective proteomes of controls and subjects with LC and HCC. Methods Mass Spectrometry analysis using liquid chromatography electro spray ionization quadrupole time-of-flight was conducted on 339 subjects using a pooled expression profiling approach. ELISA assays were performed on four significantly differentially expressed proteins to validate their expression profiles in subjects from the Gambia and a pilot group from Nigeria. Results from this were collated for statistical multiplexing using logistic regression analysis. Results Twenty-six proteins were identified as differentially expressed between the three subject groups. Direct measurements of four; hemopexin, alpha-1-antitrypsin, apolipoprotein A1 and complement component 3 confirmed their change in abundance in LC and HCC versus control patients. These trends were independently replicated in the pilot validation subjects from Nigeria. The statistical multiplexing of these proteins demonstrated performance comparable to or greater than ALT in identifying liver cirrhosis or carcinogenesis. This exercise also proposed preliminary cut offs with achievable sensitivity, specificity and AUC statistics greater than reported AFP averages. Conclusions The validated changes of expression in these proteins have the potential for development into high-performance tests usable in the diagnosis and or monitoring of HCC and LC patients. The identification of sustained expression trends strengthens the suggestion of these four proteins as worthy candidates for further investigation in the context of liver disease. The statistical combinations also provide a novel inroad of analyses able to propose definitive cut-offs and combinations for evaluation of performance