De-pollution efficacy of photocatalytic roofing granules

Photocatalytic building surfaces can harness sunlight to reduce urban air pollution. The NOx abatement capacity of TiO2-coated granules used in roofing products was evaluated for commercial product development. A laboratory test chamber and ancillary setup were built following conditions prescribed by ISO Standard 22197-1. It was validated by exposing reference P25-coated aluminum plates to a 3 L min−1 air flow enriched in 1 ppm NO under UVA irradiation (360 nm, 11.5 W m−2). We characterized prototype granule-surfaced asphalt shingles and loose granules prepared with different TiO2 loadings and post-treatment formulations. Tests performed at surface temperatures of 25 and 60 °C showed that NOx abatement was more effective at the higher temperature. Preliminary tests explored the use of 1 ppm NO2 and of 1 ppm and 0.3 ppm NO/NO2 mixtures. Specimens were aged in a laboratory accelerated weathering apparatus, and by exposure to the outdoor environment over periods that included dry and rainy seasons. Laboratory aging led to higher NO removal and NO2 formation rates, and the same catalyst activation was observed after field exposure with frequent precipitation. However, exposure during the dry season reduced the performance. This inactivation was mitigated by cleaning the surface of field-exposed specimens. Doubling the TiO2 loading led to a 50–150% increase in NO removal and NOx deposition rates. Application of different post-treatment coatings decreased NO removal rates (21–35%) and NOx deposition rates (26–74%) with respect to untreated granules. The mass balance of nitrogenated species was assessed by extracting granules after UV exposure in a 1 ppm NO-enriched atmosphere

Nanolithography based on real-time electrically-controlled indentation with an atomic force microscope for nanocontacts elaboration

We report on the fabrication of nanocontacts by indentation of an ultrathin insulating photoresist layer deposited on various types of conductive structures. A modified atomic force microscope (AFM) designed for local resistance measurements is used as a nanoindenter. The nanoindentation is performed while measuring continuously the resistance between the conductive tip of the AFM and the conductive layer, which is used as the trigger parameter to stop the indentation. This allows an extremely accurate control of the indentation process. The indented hole is subsequently filled by a metal to create a contact on the underlying layer. We show that nanocontacts in the range of 1 to 10 nm2 can be created with this technique

Tribological and electrical study of Fluorinated Diazonium Films as dry lubricants for electrical contacts

The need to operate in extreme environmental conditions (ultra high vacuum, high temperatures, aerospatial, etc.) and the miniaturisation toward microelectromechanical system is demanding new materials in the field of low-level electrical contacts lubrication. A dry and chemically immobilised layer avoiding the traditional wet lubricating fluids would have many advantages. We report here the first results on films obtained by the electrochemical reduction of different diazonium salts and their use as protective coatings able to lubricate the metallic surfaces of an electrical contact while preserving at the same time electrical conduction. The physicochemical properties of the films, elaborated from various diazonium salts, were studied by cyclic voltammetry and ATR FT-IR spectroscopy. Atomic force microscope was combined with a home-made wide-range current measurement system to investigate simultaneously the mechanical and electrical interactions between the doped diamond conductive tips and the evaporated gold surfaces coated with the diazonium films. The analysis of the simultaneous mechanical and electrical properties of the films in a nanocontact situation is shown to bring much insight into the electrical contact application

Sentinel network for monitoring in vitro susceptibility of Plasmodium falciparum to antimalarial drugs in Colombia: a proof of concept

Drug resistance is one of the principal obstacles blocking worldwide malaria control. In Colombia, malaria remains a major public health concern and drug-resistant parasites have been reported. In vitro drug susceptibility assays are a useful tool for monitoring the emergence and spread of drug-resistant Plasmodium falciparum. The present study was conducted as a proof of concept for an antimalarial drug resistance surveillance network based on in vitro susceptibility testing in Colombia. Sentinel laboratories were set up in three malaria endemic areas. The enzyme linked immunosorbent assay-histidine rich protein 2 and schizont maturation methods were used to assess the susceptibility of fresh P. falciparum isolates to six antimalarial drugs. This study demonstrates that an antimalarial drug resistance surveillance network based on in vitro methods is feasible in the field with the participation of a research institute, local health institutions and universities. It could also serve as a model for a regional surveillance network. Preliminary susceptibility results showed widespread chloroquine resistance, which was consistent with previous reports for the Pacific region. However, high susceptibility to dihydroartemisinin and lumefantrine compounds, currently used for treatment in the country, was also reported. The implementation process identified critical points and opportunities for the improvement of network sustainability strategies.PAHO [057-1-3144141]; COLCIENCIAS [ID 2229-405-20319]info:eu-repo/semantics/publishedVersio

Mapping the Spatial Distribution of Charge Carriers in LaAlO3/SrTiO3 Heterostructures

At the interface between complex insulating oxides, novel phases with interesting properties may occur, such as the metallic state reported in the LaAlO3/SrTiO3 system. While this state has been predicted and reported to be confined at the interface, some works indicate a much broader spatial extension, thereby questioning its origin. Here we provide for the first time a direct determination of the carrier density profile of this system through resistance profile mappings collected in cross-section LaAlO3/SrTiO3 samples with a conducting-tip atomic force microscope (CT-AFM). We find that, depending upon specific growth protocols, the spatial extension of the high-mobility electron gas can be varied from hundreds of microns into SrTiO3 to a few nanometers next to the LaAlO3/SrTiO3 interface. Our results emphasize the potential of CT-AFM as a novel tool to characterize complex oxide interfaces and provide us with a definitive and conclusive way to reconcile the body of experimental data in this system.Comment: This updated version contains new experimental dat

Enhancement of the Electron Spin Resonance of Single-Walled Carbon Nanotubes by Oxygen Removal

We have observed a nearly fourfold increase in the electron spin resonance (ESR) signal from an ensemble of single-walled carbon nanotubes (SWCNTs) due to oxygen desorption. By performing temperature-dependent ESR spectroscopy both before and after thermal annealing, we found that the ESR in SWCNTs can be reversibly altered via the molecular oxygen content in the samples. Independent of the presence of adsorbed oxygen, a Curie-law (spin susceptibility $\propto 1/T$) is seen from $\sim$4 K to 300 K, indicating that the probed spins are finite-level species. For both the pre-annealed and post-annealed sample conditions, the ESR linewidth decreased as the temperature was increased, a phenomenon we identify as motional narrowing. From the temperature dependence of the linewidth, we extracted an estimate of the intertube hopping frequency; for both sample conditions, we found this hopping frequency to be $\sim$100 GHz. Since the spin hopping frequency changes only slightly when oxygen is desorbed, we conclude that only the spin susceptibility, not spin transport, is affected by the presence of physisorbed molecular oxygen in SWCNT ensembles. Surprisingly, no linewidth change is observed when the amount of oxygen in the SWCNT sample is altered, contrary to other carbonaceous systems and certain 1D conducting polymers. We hypothesize that physisorbed molecular oxygen acts as an acceptor ($p$-type), compensating the donor-like ($n$-type) defects that are responsible for the ESR signal in bulk SWCNTs.Comment: 14 pages, 7 figure

Conductive-probe atomic force microscopy characterization of silicon nanowire

The electrical conduction properties of lateral and vertical silicon nanowires (SiNWs) were investigated using a conductive-probe atomic force microscopy (AFM). Horizontal SiNWs, which were synthesized by the in-plane solid-liquid-solid technique, are randomly deployed into an undoped hydrogenated amorphous silicon layer. Local current mapping shows that the wires have internal microstructures. The local current-voltage measurements on these horizontal wires reveal a power law behavior indicating several transport regimes based on space-charge limited conduction which can be assisted by traps in the high-bias regime (> 1 V). Vertical phosphorus-doped SiNWs were grown by chemical vapor deposition using a gold catalyst-driving vapor-liquid-solid process on higly n-type silicon substrates. The effect of phosphorus doping on the local contact resistance between the AFM tip and the SiNW was put in evidence, and the SiNWs resistivity was estimated

Absence of association between Plasmodium falciparum small sub-unit ribosomal RNA gene mutations and in vitro decreased susceptibility to doxycycline

BACKGROUND: Doxycycline is an antibiotic used in combination with quinine or artesunate for malaria treatment or alone for malaria chemoprophylaxis. Recently, one prophylactic failure has been reported, and several studies have highlighted in vitro doxycycline decreased susceptibility in Plasmodium falciparum isolates from different areas. The genetic markers that contribute to detecting and monitoring the susceptibility of P. falciparum to doxycycline, the pfmdt and pftetQ genes, have recently been identified. However, these markers are not sufficient to explain in vitro decreased susceptibility of P. falciparum to doxycycline. In this paper, the association between polymorphism of the small sub-unit ribosomal RNA apicoplastic gene pfssrRNA (PFC10_API0057) and in vitro susceptibilities of P. falciparum isolates to doxycycline were investigated. METHODS: Doxycycline IC50 determinations using the hypoxanthine uptake inhibition assay were performed on 178 African and Thai P. falciparum isolates. The polymorphism of pfssrRNA was investigated in these samples by standard PCR followed by sequencing. RESULTS: No point mutations were found in pfssrRNA in the Thai or African isolates, regardless of the determined IC50 values. CONCLUSIONS: The pfssrRNA gene is not associated with in vitro decreased susceptibility of P. falciparum to doxycycline. Identifying new in vitro molecular markers associated with reduced susceptibility is needed, to survey the emergence of doxycycline resistance

Malaria Rapid Testing by Community Health Workers Is Effective and Safe for Targeting Malaria Treatment: Randomised Cross-Over Trial in Tanzania

Early diagnosis and prompt, effective treatment of uncomplicated malaria is critical to prevent severe disease, death and malaria transmission. We assessed the impact of rapid malaria diagnostic tests (RDTs) by community health workers (CHWs) on provision of artemisinin-based combination therapy (ACT) and health outcome in fever patients. Twenty-two CHWs from five villages in Kibaha District, a high-malaria transmission area in Coast Region, Tanzania, were trained to manage uncomplicated malaria using RDT aided diagnosis or clinical diagnosis (CD) only. Each CHW was randomly assigned to use either RDT or CD the first week and thereafter alternating weekly. Primary outcome was provision of ACT and main secondary outcomes were referral rates and health status by days 3 and 7. The CHWs enrolled 2930 fever patients during five months of whom 1988 (67.8%) presented within 24 hours of fever onset. ACT was provided to 775 of 1457 (53.2%) patients during RDT weeks and to 1422 of 1473 (96.5%) patients during CD weeks (Odds Ratio (OR) 0.039, 95% CI 0.029-0.053). The CHWs adhered to the RDT results in 1411 of 1457 (96.8%, 95% CI 95.8-97.6) patients. More patients were referred on inclusion day during RDT weeks (10.0%) compared to CD weeks (1.6%). Referral during days 1-7 and perceived non-recovery on days 3 and 7 were also more common after RDT aided diagnosis. However, no fatal or severe malaria occurred among 682 patients in the RDT group who were not treated with ACT, supporting the safety of withholding ACT to RDT negative patients. RDTs in the hands of CHWs may safely improve early and well-targeted ACT treatment in malaria patients at community level in Africa.\ud \ud \ud \u