Applying RP-FDM Technology to Produce Prototype Castings Using the Investment Casting Method

The research focused on the production of prototype castings, which is mapped out starting from the drawing documentation up to theproduction of the casting itself. The FDM method was applied for the production of the 3D pattern. Its main objective was to find out whatdimensional changes happened during individual production stages, starting from the 3D pattern printing through a silicon mouldproduction, wax patterns casting, making shells, melting out wax from shells and drying, up to the production of the final casting itself.Five measurements of determined dimensions were made during the production, which were processed and evaluated mathematically.A determination of shrinkage and a proposal of measures to maintain the dimensional stability of the final casting so as to meetrequirements specified by a customer were the results

Electron scattering in HCl: An improved nonlocal resonance model

We present an improved nonlocal resonance model for electron-HCl collisions. The short-range part of the model is fitted to ab initio electron-scattering eigenphase sums calculated using the Schwinger multichannel method, while the long-range part is based on the ab initio potential-energy curve of the bound anion HCl-. This model significantly improves the agreement of nonlocal resonance calculations with recent absolute experimental data on dissociative electron attachment cross sections for HCl and DCl. It also partly resolves an inconsistency in the temperature effect in dissociative electron attachment to HCl present in the literature. Finally, the present model reproduces all qualitative structures observed previously in elastic scattering and vibrational-excitation cross sections

Post-synthesis incorporation of Al into germanosilicate ITH zeolites : the influence of treatment conditions on the acidic properties and catalytic behavior in tetrahydropyranylation

M. S. thanks the Czech Science Foundation for support through the project 14-30898P. M. O. acknowledges the Czech Science Foundation for the project 13-17593P. R. E. M. thanks the EPSRC for funding (EP/K025112/1 and EP/L014475/1).Post-synthesis alumination of germanosilicate medium-pore ITH zeolites was shown to be an effective procedure for tuning their acidity. Treatment of ITH zeolites synthesized with different chemical compositions (i.e. Si/Ge = 2.5, 4.4 and 5.8) with aqueous Al(NO3)3 solution led to the formation of strong Brønsted and Lewis acid sites and an increasing fraction of ultramicro- and meso-pores in Ge-rich ITH samples (Si/Ge = 2.5 and 4.4). The concentration of Al incorporated into the framework increases with decreasing Si/Ge ratio of the parent ITH. The increasing temperature of alumination from 80 to 175 °C (HT conditions) resulted in (1) a 1.5-2-fold increase in the concentration of Brønsted acid sites formed and (2) a decreasing fraction of framework Al atoms detectable with base probe molecules (i.e. pyridine, 2,6-di-tert-butylpyridine), i.e. an increased concentration of the "inner" acid sites. The activity of prepared Al-substituted ITH zeolites in tetrahydropyranylation of alcohols is enhanced with increasing amount of accessible acid sites in bulky crystals (e.g. alumination at lower temperature) or with increasing total concentration of acid centres within tiny ITH crystals (e.g. alumination under HT conditions). This trend became more prominent with increasing kinetic diameter of the substrate molecules under investigation (methanol <1-propanol <1-hexanol).PostprintPeer reviewe

Full scale static loading and fire resistance tests of LSF mezzanine systems

The subject of the article is an experimental investigation of the actual behavior of thin-walled cold-formed C profiles used in the mezzanine systems as floor beams under the effects of static load and under the effects of fire. The aim is to determine the improved design characteristics of floor beams derived from the results of experiments, which will lead to their more economical and efficient design compared to design performed based on the rules and calculation procedures specified in the relevant European standards (Eurocodes). In total 16 static loading tests were performed on a section of the floor structure in real scale using the vacuum test method, which allows apply the uniform load. The results of static loading tests are statistically evaluated and the characteristic values of bending resistances for primary beams are derived based on the Annex D of EN 1990. Generally, the number of fire resistance tests carried out in the past on full-scale sections of load- bearing thin-walled steel structures is very limited. Therefore, standard full-scale fire resistance tests were performed on light gauge steel frame floor structures of two different configurations. First configuration includes one internal (middle) doubled primary beam and two single outer primary beams, a second configuration includes only two single outer primary beams. The fire resistance tests were performed according to EN 1365-2 „Fire resistance tests for loadbearing elements - Part 2: Floors and roofs”. Both tested configurations are classified based on the EN 13501-2 „Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services” and compared with the predicted fire resistance calculated according to EN 1993-1-2 „Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design”.The authors gratefully acknowledge to the Technology Agency of the Czech Republic – TACR (www.tacr.cz) for its support under the framework of research project FW01010206

Correlation Between the Deuteron Characteristics and the Low-energy Triplet np Scattering Parameters

The correlation relationship between the deuteron asymptotic normalization constant, $A_{S}$, and the triplet np scattering length, $a_{t}$, is investigated. It is found that 99.7% of the asymptotic constant $A_{S}$ is determined by the scattering length $a_{t}$. It is shown that the linear correlation relationship between the quantities $A_{S}^{-2}$ and $1/a_{t}$ provides a good test of correctness of various models of nucleon-nucleon interaction. It is revealed that, for the normalization constant $A_{S}$ and for the root-mean-square deuteron radius $r_{d}$, the results obtained with the experimental value recommended at present for the triplet scattering length $a_{t}$ are exaggerated with respect to their experimental counterparts. By using the latest experimental phase shifts of Arndt et al., we obtain, for the low-energy scattering parameters ($a_{t}$, $r_{t}$, $P_{t}$) and for the deuteron characteristics ($A_{S}$, $r_{d}$), results that comply well with experimental data.Comment: 19 pages, 1 figure, To be published in Physics of Atomic Nucle

Reducing Bit-Vector Polynomials to SAT using Gröbner Bases

We address the satisfiability of systems of polynomial equations over bit-vectors. Instead of conventional bit-blasting, we exploit word-level inference to translate these systems into non-linear pseudo-boolean constraints. We derive the pseudo-booleans by simulating bit assignments through the addition of (linear) polynomials and applying a strong form of propagation by computing Gröbner bases. By handling bit assignments symbolically, the number of Gröbner basis calculations, along with the number of assignments, is reduced. The final Gröbner basis yields expressions for the bit-vectors in terms of the symbolic bits, together with non-linear pseudo-boolean constraints on the symbolic variables, modulo a power of two. The pseudo-booleans can be solved by translation into classical linear pseudo-boolean constraints (without a modulo) or by encoding them as propositional formulae, for which a novel translation process is described

Validation of New Enhanced ACC/ESC STEMI Criteria on the Population of Patients with Suspected Myocardial Infarction

Abstract Current electrocardiographic criteria for identifying patients with ST-segment elevation myocardial infarction (STEMI) perform with high specificity (SP), but low sensitivity (SE). Based on data acquired during ballooninflation angioplasty, we found that the SE of ACC/ESC STEMI criteria can be improved without any loss of SP by considering ST elevation in 3 added pairs of contiguous leads Introduction Currently used electrocardiographic criteria [1] recommended by the American College of Cardiology / European Society of Cardiology (ACC/ESC) for identifying patients with ST-segment-elevation myocardial infarction (STEMI) perform with high specificity, but low sensitivity. Consequently, many falsenegative patients may not receive the appropriate therapy. Several previous studies, such as Methods Patient population Design set consisted of 12-lead ECGs from STAFF3 database from Duke University ECG acquisition and processing In the design set, the standard 12-lead ECG was recorded digitally for each participant of the study by the Siemens-Elema AB (Solna, Sweden) ECG cart at 1,000 Hz sampling rate with an amplitude resolution of 0.6 µV for the least-significant bi

Conservation genetics of the pond bat (Myotis dasycneme) with special focus on the populations in northwestern Germany and in Jutland, Denmark

Conservation genetics is important in the management of endangered species, helping to understand their connectivity and long‐term viability, thus identifying populations of importance for conservation. The pond bat (Myotis dasycneme) is a rare species classified as “Near Threatened” with a wide but patchy Palearctic distribution. A total of 277 samples representing populations in Denmark, Germany, Latvia, Hungary, and Russia were used in the genetic analyses; 224 samples representing Denmark, Germany, and Russia were analyzed at 10 microsatellite loci; 241 samples representing all areas were analyzed using mitochondrial D‐loop and cytochrome B sequences. A Bayesian clustering approach revealed two poorly resolved clusters, one representing the Danish and German groups and the other the Russian group. However, significantly different pairwise FST and DEST estimates were observed between the Danish and German groups and between the Danish and Russian groups suggesting a recent population structure. These conflicting results might be attributed to the effect of migration or low resolution due to the number of microsatellite markers used. After concatenating the two mitochondrial sequences, analysis detected significant genetic differentiation between all populations, probably due to genetic drift combined with a founder event. The phylogenetic tree suggested a closer relationship between the Russian and Northern European populations compared to the Hungarian population, implying that the latter belongs to an older ancestral population. This was supported by the observed haplotype network and higher nucleotide diversity in this population. The genetic structuring observed in the Danish/German pond bat stresses the need for a cross‐border management between the two countries. Further, the pronounced mtDNA structuring, together with the indicated migration between nearby populations suggest philopatric female behavior but male migration, emphasizes the importance of protecting suitable habitat mosaics to maintain a continuum of patches with dense pond bat populations across the species' distribution range

Increasing Incidence of Geomyces destructans Fungus in Bats from the Czech Republic and Slovakia

BACKGROUND: White-nose syndrome is a disease of hibernating insectivorous bats associated with the fungus Geomyces destructans. It first appeared in North America in 2006, where over a million bats died since then. In Europe, G. destructans was first identified in France in 2009. Its distribution, infection dynamics, and effects on hibernating bats in Europe are largely unknown. METHODOLOGY/PRINCIPAL FINDINGS: We screened hibernacula in the Czech Republic and Slovakia for the presence of the fungus during the winter seasons of 2008/2009 and 2009/2010. In winter 2009/2010, we found infected bats in 76 out of 98 surveyed sites, in which the majority had been previously negative. A photographic record of over 6000 hibernating bats, taken since 1994, revealed bats with fungal growths since 1995; however, the incidence of such bats increased in Myotis myotis from 2% in 2007 to 14% by 2010. Microscopic, cultivation and molecular genetic evaluations confirmed the identity of the recently sampled fungus as G. destructans, and demonstrated its continuous distribution in the studied area. At the end of the hibernation season we recorded pathologic changes in the skin of the affected bats, from which the fungus was isolated. We registered no mass mortality caused by the fungus, and the recorded population decline in the last two years of the most affected species, M. myotis, is within the population trend prediction interval. CONCLUSIONS/SIGNIFICANCE: G. destructans was found to be widespread in the Czech Republic and Slovakia, with an epizootic incidence in bats during the most recent years. Further development of the situation urgently requires a detailed pan-European monitoring scheme