Feruloylation and structure of arabinoxylan in wheat endosperm cell walls from RNAi lines with suppression of genes responsible for backbone synthesis and decoration

Arabinoxylan (AX) is the major component of the cell walls of wheat grain (70% in starchy endosperm), is an important determinant of end‐use qualities affecting food processing, use for animal feed and distilling and is a major source of dietary fibre in the human diet. AX is a heterogeneous polysaccharide composed of fractions which can be sequentially extracted by water (WE‐AX), then xylanase action (XE‐AX) leaving an unextractable (XU‐AX) fraction. We determined arabinosylation and feruloylation of AX in these fractions in both wild‐type wheat and RNAi lines with decreased AX content (TaGT43_2 RNAi, TaGT47_2 RNAi) or decreased arabinose 3‐linked to mono‐substituted xylose (TaXAT1 RNAi). We show that these fractions are characterized by the degree of feruloylation of AX, <5, 5–7 and 13–19 mg bound ferulate (g−1 AX), and their content of diferulates (diFA), <0.3, 1–1.7 and 4–5 mg (g−1 AX), for the WE, XE and XU fractions, respectively, in all RNAi lines and their control lines. The amount of AX and its degree of arabinosylation and feruloylation were less affected by RNAi transgenes in the XE‐AX fraction than in the WE‐AX fraction and largely unaffected in the XU‐AX fraction. As the majority of diFA is associated with the XU‐AX fraction, there was only a small effect (TaGT43_2 RNAi, TaGT47_2 RNAi) or no effect (TaXAT1 RNAi) on total diFA content. Our results are compatible with a model where, to maintain cell wall function, diFA is maintained at stable levels when other AX properties are altered

Reação de genótipos de tomateiro às raças 2 e 3 de Fusarium oxysporum f. sp. lycopersici Reaction of tomato genotypes to races 2 and 3 of Fusarium oxysporum f. sp. lycopersici

A murcha-de-fusário, causada por Fusarium oxysporum f. sp. lycopersici, é uma importante doença do tomateiro (Solanum lycopersicon L.) no Nordeste brasileiro. Visando selecionar genótipos com potencial de utilização no manejo da doença, foram avaliadas 60 linhagens (geração F7) oriundas do cruzamento entre o acesso BHRS-2,3 e a cultivar Viradoro, em relação a isolados das raças fisiológicas 2 e 3 de F. oxysporum f. sp. lycopersici. Os isolados foram inoculados em mudas com 21 dias de idade pelo método do corte de raízes e imersão na suspensão de conídios do patógeno. A avaliação foi realizada após 21 dias, com o auxílio de escala de notas de 1 a 5, para agrupamento dos genótipos em cinco classes de reação. A maioria dos genótipos (73,3%) se comportou como altamente resistente ao isolado da raça 2, enquanto 45,0% foram classificados como suscetíveis e 28,3% como altamente suscetíveis ao isolado da raça 3. Somente a linhagem L-1 apresentou reação de alta resistência aos dois isolados de ambas as raças. A estabilidade da resistência dessa linhagem foi avaliada em relação a cinco isolados de cada raça (2 e 3) do patógeno. A linhagem L-1 apresentou reação de alta resistência a todos os isolados da raça 2, evidenciado estabilidade da resistência. No entanto, em relação aos isolados da raça 3, essa linhagem apresentou três classes de reação distintas, variando de altamente resistente a suscetível, indicando instabilidade da resistência à essa raça.<br>The Fusarium wilt caused by Fusarium oxysporum f. sp. lycopersici, is an important disease of tomato (Solanum lycopersicon L.) in Northeastern Brazil. In order to select genotypes with potential for use in the disease management, 60 strains were evaluated (F7 generation) from the crossing of access BHRS-2, 3 and Viradoro cultivar in relation to isolates from the physiologic races 2 and 3 of F. oxysporum f. sp. lycopersici. The isolates were inoculated on 21-day old seedling using the method of cutting the roots and soaking it in the suspension of the pathogen conidia. The evaluation was carried out after 21 days, with the scale of grades ranging from 1 to 5. The genotypes were grouped into five classes of reaction. Most genotypes (73.3%) behaved as highly resistant to the race 2 isolate, while 45.0% were classified as susceptible and 28.3% as highly susceptible to the race 3 isolate. Only the L-1 strain showed high resistance reaction to both isolates. The stability of this line of resistance was evaluated to five isolates of each race (2 and 3). The line L-1 showed high levels of resistance to all race 2 isolates, therefore indicating high stability of resistance. However, for race 3 isolates, this strain showed three distinct classes of reaction, ranging from highly resistant to susceptible, indicating instability of resistance to this race

Effect of suppression of arabinoxylan synthetic genes in wheat endosperm on chain length of arabinoxylan and extract viscosity

Arabinoxylan (AX) is the dominant component within wheat (Triticum aestivum L.) endosperm cell walls, accounting for 70% of the polysaccharide. The viscosity of aqueous extracts from wheat grain is a key trait influencing the processing for various end uses, and this is largely determined by the properties of endosperm AX. We have previously shown dramatic effects on endosperm AX in transgenic wheat by down-regulating either TaGT43_2 or TaGT47_2 genes (orthologues to IRX9 and IRX10 in Arabidopsis, respectively) implicated in AX chain extension and the TaXAT1 gene responsible for monosubstitution by 3-linked arabinose. Here, we use these transgenic lines to investigate the relationship between amounts of AX in soluble and insoluble fractions, the chain-length distribution of these measured by intrinsic viscosity and the overall effect on extract viscosity. In transgenic lines expressing either the TaGT43_2 or TaGT47_2 RNAi transgenes, the intrinsic viscosities of water-extractable (WE-AX) and of a water-insoluble alkaline-extracted fraction (AE-AX) were decreased by between 10% and 50% compared to control lines. In TaXAT1 RNAi lines, there was a 15% decrease in intrinsic viscosity of WE-AX but no consistent effect on that of AE-AX. All transgenic lines showed decreases in extract viscosity with larger effects in TaGT43_2 and TaGT47_2 RNAi lines (by up to sixfold) than in TaXAT1 RNAi lines (by twofold). These effects were explained by the decreases in amount and chain length of WE-AX, with decreases in amount having the greater influence. Extract viscosity from wheat grain can therefore be greatly decreased by suppression of single gene targets

Xylan extraction from pretreated sugarcane bagasse using alkaline and enzymatic approaches

[Background] New biorefinery concepts are necessary to drive industrial use of lignocellulose biomass components. Xylan recovery before enzymatic hydrolysis of the glucan component is a way to add value to the hemicellulose fraction, which can be used in papermaking, pharmaceutical, and food industries. Hemicellulose removal can also facilitate subsequent cellulolytic glucan hydrolysis.[Results] Sugarcane bagasse was pretreated with an alkaline-sulfite chemithermomechanical process to facilitate subsequent extraction of xylan by enzymatic or alkaline procedures. Alkaline extraction methods yielded 53% (w/w) xylan recovery. The enzymatic approach provided a limited yield of 22% (w/w) but produced the xylan with the lowest contamination with lignin and glucan components. All extracted xylans presented arabinosyl side groups and absence of acetylation. 2D-NMR data suggested the presence of O-methyl-glucuronic acid and p-coumarates only in enzymatically extracted xylan. Xylans isolated using the enzymatic approach resulted in products with molecular weights (Mw) lower than 6 kDa. Higher Mw values were detected in the alkali-isolated xylans. Alkaline extraction of xylan provided a glucan-enriched solid readily hydrolysable with low cellulase loads, generating hydrolysates with a high glucose/xylose ratio.[Conclusions] Hemicellulose removal before enzymatic hydrolysis of the cellulosic fraction proved to be an efficient manner to add value to sugarcane bagasse biorefining. Xylans with varied yield, purity, and structure can be obtained according to the extraction method. Enzymatic extraction procedures produce high-purity xylans at low yield, whereas alkaline extraction methods provided higher xylan yields with more lignin and glucan contamination. When xylan extraction is performed with alkaline methods, the residual glucan-enriched solid seems suitable for glucose production employing low cellulase loadings.This work was supported by FAPESP (Contract Numbers 08/56256-5 and 14/06923-6), CNPq, and CAPES. Daniela Sporck and Felipe Reinose thank CAPES for their student fellowships.Peer reviewe