Elucidating Mechanisms behind Ambient Storage-Induced Efficiency Improvements in Perovskite Solar Cells

ペロブスカイト太陽電池の常温熟成機構の解明. 京都大学プレスリリース. 2021-02-17.Initial improvement in power conversion efficiency (PCE) during ambient storage is often seen in perovskite solar cells (PSCs). In this work, we studied the origin of PCE enhancement by ambient storage on typical n-i-p PSCs. We found improvements in both fill factor and open-circuit voltage during the first 2 days of storage. By analyzing temperature and light intensity-dependent VOC, we found that the charge recombination mechanism changed from surface- to bulk-dominated because of defect passivation at the perovskite surface upon storage. In addition, we found that storage improves the conductivity and lowers the highest occupied molecular orbital level of the spiro-OMeTAD, improving charge extraction. These results show that there is more than one factor causing the storage-induced improvements in perovskite solar cells

Understanding the impact of SAM Fermi levels on high efficiency p-i-n perovskite solar cells

Completing the picture of the underlying physics of perovskite solar cell interfaces that incorporate self-assembled molecular layers (SAMs) will accelerate further progress in p-i-n devices. In this work, we modified the Fermi level of a nickel oxide–perovskite interface by utilizing SAM layers with a range of dipole strengths to establish the link between the resulting shift of the built-in potential of the solar cell and the device parameters. To achieve this, we fabricated a series of high-efficiency perovskite solar cells with no hysteresis and characterized them through stabilize and pulse (SaP), JV curve, and time-resolved photoluminescence (TRPL) measurements. Our results unambiguously show that the potential drop across the perovskite layer (in the range of 0.6–1 V) exceeds the work function difference at the device’s electrodes. These extracted potential drop values directly correlate to work function differences in the adjacent transport layers, thus demonstrating that their Fermi level difference entirely drives the built-in potential in this device configuration. Additionally, we find that selecting a SAM with a deep HOMO level can result in charge accumulation at the interface, leading to reduced current flow. Our findings provide insights into the device physics of p-i-n perovskite solar cells, highlighting the importance of interfacial energetics on device performance

Device Performance of Emerging Photovoltaic Materials (Version 3)

Following the 2nd release of the “Emerging PV reports,” the best achievements in the performance of emerging photovoltaic devices in diverse emerging photovoltaic research subjects are summarized, as reported in peer-reviewed articles in academic journals since August 2021. Updated graphs, tables, and analyses are provided with several performance parameters, e.g., power conversion efficiency, open-circuit voltage, short-circuit current density, fill factor, light utilization efficiency, and stability test energy yield. These parameters are presented as a function of the photovoltaic bandgap energy and the average visible transmittance for each technology and application, and are put into perspective using, e.g., the detailed balance efficiency limit. The 3rd installment of the “Emerging PV reports” extends the scope toward triple junction solar cells

Device Performance of Emerging Photovoltaic Materials (Version 2)

Following the 1st release of the “Emerging photovoltaic (PV) reports”, the best achievements in the performance of emerging photovoltaic devices in diverse emerging photovoltaic research subjects are summarized, as reported in peer-reviewed articles in academic journals since August 2020. Updated graphs, tables, and analyses are provided with several performance parameters, e.g., power conversion efficiency, open-circuit voltage, short-circuit current density, fill factor, light utilization efficiency, and stability test energy yield. These parameters are presented as a function of the photovoltaic bandgap energy and the average visible transmittance for each technology and application and are put into perspective using, e.g., the detailed balance efficiency limit. The 2nd instalment of the “Emerging PV reports” extends the scope toward tandem solar cells and presents the current state-of-the-art in tandem solar cell performance for various material combinations.</p

Integrating Low-Cost Earth-Abundant Co-Catalysts with Encapsulated Perovskite Solar Cells for Efficient and Stable Overall Solar Water Splitting

Metal halide perovskite solar cells have an appropriate bandgap (1.5–1.6 eV), and thus output voltage (>1 V), to directly drive solar water splitting. Despite significant progress, their moisture sensitivity still hampers their application for integrated monolithic devices. Furthermore, the prevalence of the use of noble metals as co-catalysts for existing perovskite-based devices undermines their use for low-cost H2 production. Here, a monolithic architecture for stable perovskite-based devices with earth-abundant co-catalysts is reported, demonstrating an unassisted overall solar-to-hydrogen efficiency of 8.54%. The device layout consists of two monolithically encapsulated perovskite (FA0.80MA0.15Cs0.05PbI2.55Br0.45) solar cells with low-cost earth-abundant CoP and FeNi(OH)x co-catalysts as the photocathode and photoanode, respectively. The CoP-based photocathode demonstrates more than 17 h of continuous operation, with a photocurrent density of 12.4 mA cm−2 at 0 V and an onset potential as positive as ≈1 V versus reversible hydrogen electrode (RHE). The FeNi(OH)x-based photoanode achieves a photocurrent of 11 mA cm−2 at 1.23 V versus RHE for more than 13 h continuous operation. These excellent stability and performance demonstrate the potential for monolithic integration of perovskite solar cells and low-cost earth-abundant co-catalysts for efficient direct solar H2 production.</p

Complementary bulk and surface passivations for highly efficient perovskite solar cells by gas quenching

The power conversion efficiency (PCE) of metal halide perovskite solar cells (PSCs) has improved dramatically from 3.8% to 25.5% in only a decade. Gas quenching is a desirable method for fabricating high-efficiency cells as it does not consume antisolvents and is compatible with large-area deposition methods such as doctor blading and slot-die coating. To further improve PCEs for gas-quenched PSCs, here, we develop complementary bulk and surface passivation strategies by incorporating potassium iodide (KI) in the perovskite precursor and applying n-hexylammonium bromide (HABr) to the perovskite surface. We show that (1) KI induces a spatial-compositional change, improving grain boundary properties; (2) KI and HABr reduce traps, especially at levels close to the mid-gap; and (3) HABr greatly improves the built-in potential of the device, thereby improving voltage output. The champion device achieves a steady-state PCE of 23.6% with a VOC of 1.23V, which is, to the best of our knowledge, the highest for PSC by gas quenching to date

Device Performance of Emerging Photovoltaic Materials (Version 4)

Following the 3rd release of the “Emerging PV reports”, the best achievements in the performance of emerging photovoltaic (e-PV) devices in diverse e-PV research subjects are summarized, as reported in peer-reviewed articles in academic journals since August 2022. Updated graphs, tables, and analyses are provided with several performance parameters, such as power conversion efficiency, open-circuit voltage, short-circuit current density, fill factor, light utilization efficiency, and stability test energy yield. These parameters are presented as a function of the photovoltaic bandgap energy and the average visible transmittance for each technology and application, and are put into perspective using, for example, the detailed balance efficiency limit. The 4th installment of the “Emerging PV reports” discusses the “PV emergence” classification with respect to the “PV technology generations” and “PV research waves” and highlights the latest device performance progress in multijunction and flexible photovoltaics. Additionally, Dale-Scarpulla's plots of efficiency-effort in terms of cumulative academic publication count are also introduced.</p

Device Performance of Emerging Photovoltaic Materials (Version 4)

Following the 3rd release of the “Emerging PV reports”, the best achievements in the performance of emerging photovoltaic (e-PV) devices in diverse e-PV research subjects are summarized, as reported in peer-reviewed articles in academic journals since August 2022. Updated graphs, tables, and analyses are provided with several performance parameters, such as power conversion efficiency, open-circuit voltage, short-circuit current density, fill factor, light utilization efficiency, and stability test energy yield. These parameters are presented as a function of the photovoltaic bandgap energy and the average visible transmittance for each technology and application, and are put into perspective using, for example, the detailed balance efficiency limit. The 4th installment of the “Emerging PV reports” discusses the “PV emergence” classification with respect to the “PV technology generations” and “PV research waves” and highlights the latest device performance progress in multijunction and flexible photovoltaics. Additionally, Dale-Scarpulla's plots of efficiency-effort in terms of cumulative academic publication count are also introduced.</p