Magneto-Optical Spectrum Analyzer

We present a method for the investigation of gigahertz magnetization dynamics of single magnetic nano elements. By combining a frequency domain approach with a micro focus Kerr effect detection, a high sensitivity to magnetization dynamics with submicron spatial resolution is achieved. It allows spectra of single nanostructures to be recorded. Results on the uniform precession in soft magnetic platelets are presented.Comment: 5 pages, 7 figure

Biotic and abiotic drivers of intraspecific trait variation within plant populations of three herbaceous plant species along a latitudinal gradient

Background: The importance of intraspecific trait variation (ITV) is increasingly acknowledged among plant ecologists. However, our understanding of what drives ITV between individual plants (ITVBI) at the population level is still limited. Contrasting theoretical hypotheses state that ITVBI can be either suppressed (stress-reduced plasticity hypothesis) or enhanced (stress-induced variability hypothesis) under high abiotic stress. Similarly, other hypotheses predict either suppressed (niche packing hypothesis) or enhanced ITVBI (individual variation hypothesis) under high niche packing in species rich communities. In this study we assess the relative effects of both abiotic and biotic niche effects on ITVBI of four functional traits (leaf area, specific leaf area, plant height and seed mass), for three herbaceous plant species across a 2300 km long gradient in Europe. The study species were the slow colonizing Anemone nemorosa, a species with intermediate colonization rates, Milium effusum, and the fast colonizing, non-native Impatiens glandulifera. Results: Climatic stress consistently increased ITVBI across species and traits. Soil nutrient stress, on the other hand, reduced ITVBI for A. nemorosa and I. glandulifera, but had a reversed effect for M. effusum. We furthermore observed a reversed effect of high niche packing on ITVBI for the fast colonizing non-native I. glandulifera (increased ITVBI), as compared to the slow colonizing native A. nemorosa and M. effusum (reduced ITVBI). Additionally, ITVBI in the fast colonizing species tended to be highest for the vegetative traits plant height and leaf area, but lowest for the measured generative trait seed mass. Conclusions: This study shows that stress can both reduce and increase ITVBI, seemingly supporting both the stress-reduced plasticity and stress-induced variability hypotheses. Similarly, niche packing effects on ITVBI supported both the niche packing hypothesis and the individual variation hypothesis. These results clearly illustrates the importance of simultaneously evaluating both abiotic and biotic factors on ITVBI. This study adds to the growing realization that within-population trait variation should not be ignored and can provide valuable ecological insights

Reverse Electrodialysis with saline waters and concentrated brines: a laboratory investigation towards technology scale-up

The use of concentrated brines and brackish water as feed solutions in reverse electrodialysis represents a valuable alternative to the use of river/sea water, allowing the enhancement of power output through the increase of driving force and reduction of internal stack resistance. Apart from a number of theoretical works, very few experimental investigations have been performed so far to explore this possibility. In the present work, two RED units of different size were tested using artificial saline solutions. The effects of feed concentration, temperature and flowrate on process performance parameters were analysed, adopting two different sets of membranes. These experiments allowed to identify the most favourable conditions for maximising the power output within the presently investigated range, i.e. 0.1 M NaCl as diluate and 5 M NaCl as concentrate at 40°C. Under these conditions a power density equal to 12 W/m2cell_pair was reached, among the highest so far reported in the literature. Increasing the unit size a slight reduction in power density was observed. These results indicate new directions for a successful scale-up and development of the Reverse Eletrodialysis technology

Genetic structure of captive and free-ranging okapi (Okapia johnstoni) with implications for management

Breeding programs for endangered species increasingly use molecular genetics to inform their management strategies. Molecular approaches can be useful for investigating relatedness, resolving pedigree uncertainties, and for estimating genetic diversity in captive and wild populations. Genetic data can also be used to evaluate the representation of wild population genomes within captive population gene-pools. Maintaining a captive population that is genetically representative of its wild counterpart offers a means of conserving the original evolutionary potential of a species. Okapi, an even-toed ungulate, endemic to the Democratic Republic of Congo, have recently been reclassified as Endangered by the IUCN. We carried out a genetic assessment of the ex-situ okapi (Okapia johnstoni) population, alongside an investigation into the genetic structure of wild populations across their geographic range. We found that while levels of nuclear (12 microsatellite loci) genetic variation in the wild, founder and captive okapi populations were similar, mitochondrial (833 bp of Cyt b, CR, tRNA-Thr and tRNA-Pro) variation within captive okapi was considerably reduced compared to the wild, with 16 % lower haplotype diversity. Further, both nuclear and mitochondrial alleles present in captivity provided only partial representation of those present in the wild. Thirty mitochondrial haplotypes found in the wild were not found in captivity, and two haplotypes found in captivity were not found in the wild, and the patterns of genetic variation at microsatellite loci in our captive samples were considerably different to those of the wild samples. Our study highlights the importance of genetic characterisation of captive populations, even for well-managed ex-situ breeding programs with detailed studbooks. We recommend that the captive US population should be further genetically characterised to guide management of translocations between European and US captive population

Automatic tracking of the modal parameters of an offshore wind turbine drivetrain system

An offshore wind turbine (OWT) is a complex structure that consists of different parts (e.g., foundation, tower, drivetrain, blades, et al.). The last decade, there has been continuous trend towards larger machines with the goal of cost reduction. Modal behavior is an important design aspect. For tackling noise, vibration, and harshness (NVH) issues and validating complex simulation models, it is of high interest to continuously track the vibration levels and the evolution of the modal parameters (resonance frequencies, damping ratios, mode shapes) of the fundamental modes of the turbine. Wind turbines are multi-physical machines with significant interaction between their subcomponents. This paper will present the possibility of identifying and automatically tracking the structural vibration modes of the drivetrain system of an instrumented OWT by using signals (e.g., acceleration responses) measured on the drivetrain system. The experimental data has been obtained during a measurement campaign on an OWT in the Belgian North Sea where the OWT was in standstill condition. The drivetrain, more specifically the gearbox and generator, is instrumented with a dedicated measurement set-up consisting of 17 sensor channels with the aim to continuously track the vibration modes. The consistency of modal parameter estimates made at consequent 10-min intervals is validated, and the dominant drivetrain modal behavior is identified and automatically tracked

Ten questions concerning integrating smart buildings into the smart grid

Recent advances in information and communications technology (ICT) have initiated development of a smart electrical grid and smart buildings. Buildings consume a large portion of the total electricity production worldwide, and to fully develop a smart grid they must be integrated with that grid. Buildings can now be ‘prosumers’ on the grid (both producers and consumers), and the continued growth of distributed renewable energy generation is raising new challenges in terms of grid stability over various time scales. Buildings can contribute to grid stability by managing their overall electrical demand in response to current conditions. Facility managers must balance demand response requests by grid operators with energy needed to maintain smooth building operations. For example, maintaining thermal comfort within an occupied building requires energy and, thus an optimized solution balancing energy use with indoor environmental quality (adequate thermal comfort, lighting, etc.) is needed. Successful integration of buildings and their systems with the grid also requires interoperable data exchange. However, the adoption and integration of newer control and communication technologies into buildings can be problematic with older legacy HVAC and building control systems. Public policy and economic structures have not kept up with the technical developments that have given rise to the budding smart grid, and further developments are needed in both technical and non-technical areas

Overview of normal behavior modeling approaches for SCADA-based wind turbine condition monitoring demonstrated on data from operational wind farms

Condition monitoring and failure prediction for wind turbines currently comprise a hot research topic. This follows from the fact that investments in the wind energy sector have increased dramatically due to the transition to renewable energy production. This paper reviews and implements several techniques from state-of-the-art research on condition monitoring for wind turbines using SCADA data and the normal behavior modeling framework. The first part of the paper consists of an in-depth overview of the current state of the art. In the second part, several techniques from the overview are implemented and compared using data (SCADA and failure data) from five operational wind farms. To this end, six demonstration experiments are designed. The first five experiments test different techniques for the modeling of normal behavior. The sixth experiment compares several techniques that can be used for identifying anomalous patterns in the prediction error. The selection of the tested techniques is driven by requirements from industrial partners, e.g., a limited number of training data and low training and maintenance costs of the models. The paper concludes with several directions for future work.</p

Rapid and Efficient Generation of Recombinant Human Pluripotent Stem Cells by Recombinase-mediated Cassette Exchange in the AAVS1 Locus

Even with the revolution of gene-targeting technologies led by CRISPR-Cas9, genetic modification of human pluripotent stem cells (hPSCs) is still time consuming. Comparative studies that use recombinant lines with transgenes integrated into safe harbor loci could benefit from approaches that use site-specific targeted recombinases, like Cre or FLPe, which are more rapid and less prone to off-target effects. Such methods have been described, although they do not significantly outperform gene targeting in most aspects. Using Zinc-finger nucleases, we previously created a master cell line in the AAVS1 locus of hPSCs that contains a GFP-Hygromycin-tk expressing cassette, flanked by heterotypic FRT sequences. Here, we describe the procedures to perform FLPe recombinase-mediated cassette exchange (RMCE) using this line. The master cell line is transfected with a RMCE donor vector, which contains a promoterless Puromycin resistance, and with FLPe recombinase. Application of both a positive (Puromycin) and negative (FIAU) selection program leads to the selection of RMCE without random integrations. RMCE generates fully characterized pluripotent polyclonal transgenic lines in 15 d with 100% efficiency. Despite the recently described limitations of the AAVS1 locus, the ease of the system paves the way for hPSC transgenesis in isogenic settings, is necessary for comparative studies, and enables semi-high-throughput genetic screens for gain/loss of function analysis that would otherwise be highly time consuming

Activity profile of top-class association football referees in relation to fitness test performance and match standard

The aim of this study was to examine the kinematic activity profiles, cardiovascular responses and physical fitness of top-class football referees (n=11) during the FIFA Confederations Cup 2005. Computerised match-analyses (n=9) were performed with a two-dimensional photogrammetric video system, and the cardiovascular demand imposed on the referees (n=12) was measured using heart rate recordings. Total distance covered was 10,218, s=643 m of which 3531, s=510 m was covered at high intensities (>3.6 m.s(-1)). Both total distance covered (r2=0.59; P=0.02) and high-intensity activities (r2=0.44; P=0.05) were related to the distance covered by the ball in the same match. The referees ran at high speed 37% further (P=0.01) in the actual tournament than during under-17 top-level officiating. After the 5-min interval during which high-speed running peaked, in the following 5 min the performance was reduced by 19% (P=0.01) in relation to the mean of the game. Mean heart rate was 161, s=9 b.min(-1) (86, s=3% of maximal heart rate (HRmax)). Mean heart rate (expressed as percentage of HRmax) was related in part (r2=0.36; P5 m.s(-1)) best describes the physical performance of referees; (3) heart rate recording can be a useful tool to determine the most intense periods of a match and (4) the new fitness tests adopted by FIFA were poor predictors of match activities