In-Orbit Performance of the GRACE Follow-on Laser Ranging Interferometer

The Laser Ranging Interferometer (LRI) instrument on the Gravity Recovery and Climate Experiment (GRACE) Follow-On mission has provided the first laser interferometric range measurements between remote spacecraft, separated by approximately 220 km. Autonomous controls that lock the laser frequency to a cavity reference and establish the 5 degrees of freedom two-way laser link between remote spacecraft succeeded on the first attempt. Active beam pointing based on differential wave front sensing compensates spacecraft attitude fluctuations. The LRI has operated continuously without breaks in phase tracking for more than 50 days, and has shown biased range measurements similar to the primary ranging instrument based on microwaves, but with much less noise at a level of 1 nm/Hz at Fourier frequencies above 100 mHz. © 2019 authors. Published by the American Physical Society

Polarization of Brillouin scattered light in silica nanofibers

International audienceWe investigate both theoretically and experimentally the polarization properties of Brillouin light scattering in silica optical nanofibers. Our results show that while all hybrid acoustic waves scatter light without altering the state of polarization, one of the surface acoustic wave generates a depolarized Stokes light. Because of the slight ellipticity of the nanofiber, the surface wave is actually split into two torso-radial modes which give rise to polarization scrambling of the backward Brillouin Stokes signal. Our model also predicts that the polarization of the scattered light can be restored for one specific pump polarization

Accurate measurement of Anhydride hexafluorhydric acid concentration in controlled gaseous flow with STW sensors

International audienc

Novel multi-telescopes beam combiners for next generation instruments (FIRST/SUBARU)

International audienceIntegrated optic devices are nowadays achieving extremely good performances in the field of astronomical interferometry, as shown by PIONIER or GRAVITY silica/silicon-based instruments, already installed at VLTI. In order to address other wavelengths, increase the number of apertures to be combined and eventually ensure on-chip phase modulation, we are working on a novel generation of beam combiners, based on the hybridization of glass waveguides, that can ensure very sharp bend radius, high confinement and low propagation losses, together with lithium niobate phase modulators and channel waveguides that can achieve on-chip, fast (<100kHz) phase modulation. The work presented here has been realized in collaboration with our technological partners TeemPhotonics for glass waveguides and iXBlue-PSD for lithium niobate phase modulators. We will present our results on a hybrid glass/niobate (passive/active) beam combiner that has been developed in the context of FIRST/SUBARU 9T beam combiner. The combiner is structured in three parts: a) the first stage (passive glass) achieves beam splitting from one input to eight outputs, and that for nine input fibers coming from the sub-apertures of the Subaru telescope; b) the second stage consists on a 72 channel waveguides lithium niobate phase modulator in a push-pull configuration that allows to modify on-chip the relative phase between the 36 pairs of waveguides; c) a final recombination system of Y-junctions (passive glass) that allows to obtain combination of each input to every other one. The aim of this presentation is to discuss different issues of the combiners, such as transmission, birefringence, half-wave voltage modulation and spectral range

“Anhybride hexafluorhydric acid sensors with a high sensibility.

International audienc

First results on an electro-optic visible multi-telescope beam combiner for next generation FIRST/SUBARU intruments

International audienceIntegrated optic devices are nowadays achieving extremely high performances in the field of astronomical interferometry, as shown by the PIONIER and GRAVITY instruments. Progress remains to be made in order to increase the number of apertures/beams/channels to be combined (up to 9) and eventually ensure on-chip phase modulation (for fringe temporal scanning). We present a novel generation of beam combiners, based on the hybridization of two integrated optic devices: (i) one producing glass waveguides, that can ensure very sharp bend radius, high confinement and low propagation losses, with (ii) a lithium niobate device providing phase modulators and channel waveguides that can achieve on-chip, fast (<100kHz) phase modulation. The aim of this work is to compare three different concepts for the new generation FIRST/SUBARU 9T instrument, in terms of transmission, birefringence, half-wave voltage modulation and spectral range

Development of a saw based high sensitivity anhydride hexafluorhydric acid sensor

International audienc

Development of a high sensitivity anhydride hexafluorhydric acid sensor

International audienc