Selection of mould design variables in direct stereolithography injection mould tooling

Stereolithography (SL) can be used rapidly to produce injection moulding tools. The disadvantage of the technique is that it is capable of producing only a small number of parts before failure. Stereolithography tools may break under the force exerted by part ejection when the friction between a moulding and a feature of the tool is greater than the tensile strength of the tool, resulting in tensile failure. Very few justified recommendations exist concerning the choice of mould design variables that can lower the part ejection force experienced and reduce the risk of SL tool failure. This research investigates the ejection forces resulting from the injection moulding of polypropylene (PP), acrylonitrile-butadiene-styrene (ABS) and polyamide 66 (PA66) parts from SL tools that are identical in all respects except for their build layer thickness (a process variable when generating the SL tooling cavities) and incorporated draft angles (a tooling design variable). This work attempts to identify appropriate evidence for recommendations with respect to these variables and SL injection moulding. The results show that linear adjustment of draft angle results in a fairly minor linear change in part ejection force according to the moulding material. A linear adjustment of the build layer thickness results in a greater change in part ejection force as a more non-linear relationship. In both cases the greatest ejection forces were experienced by PA66, then ABS and then the PP parts. The results also show that the surface roughness of all tools remains unchanged after moulding a number of parts in all polymers. A mathematical model was used in an attempt to predict ejection forces according to the moulding material used. This model did reflect the experimental results in terms of relative values but not in absolute values, which may be due to the limitations imposed by the development of the expressions and uncertainty about some specific values

Understanding service demand for mental health among Australians aged 16 to 64 years according to their possible need for treatment

Background: To inform decisions about mental health resource allocation, planners require reliable estimates of people who report service demand (i.e. people who use or want mental health services) according to their level of possible need. Methods: Using data on 6915 adults aged 16-64 years in Australia's 2007 National Survey of Mental Health and Wellbeing, we examined past-year service demand among respondents grouped into four levels of possible need: (a) 12-month mental disorder; (b) lifetime but no 12-month mental disorder; (c) any other indicator of possible need (12-month symptoms or reaction to stressful event, or lifetime hospitalisation); (d) no indicator of possible need. Multivariate logistic regression analyses examined correlates of service demand, separately for respondents in each of levels 1-3. Results: Sixteen per cent of Australian adults reported service demand, of whom one-third did not meet criteria for a 12-month mental disorder (equivalent to 5.7% of the adult population). Treatment patterns tended to follow a gradient defined by level of possible need. For example, service users with a 12-month disorder received, on average, 1.6-3.9 times more consultations than their counterparts in other levels of possible need, and had 1.9-2.2 times higher rates of psychologist consultation. Service users with a lifetime but not 12-month disorder or any other indicator of need consumed a similar average number of services to people with mild 12-month mental disorders, but received relatively fewer services involving the mental health sector. Service demand was associated with increased suicidality and psychological distress in all levels of possible need examined, and with poorer clinical and functional status for those with 12-month or lifetime disorders. Conclusions: Many Australians reporting service demand do not meet criteria for a current mental disorder, but may require services to maintain recovery following a past episode or because they are experiencing symptoms and significant psychological distress

Part shrinkage anomilies from stereolithography injection mould tooling

The use of stereolithography (SL) tooling allows plastic parts to be produced by injection moulding in a very short time due to the speed of mould production. One of the supposed advantages of the process is that it provides a low volume of parts that are the same as parts that would be produced by the conventional hard tooling in a fraction of the time and cost. However, this work demonstrates different rates of polymer shrinkage are developed by parts produced by SL and conventional tooling methods. These revelations may counter the greatest advantages of the SL injection moulding tooling process as the parts do not replicate those that would be produced by conventional hard tooling. This work identifies the different shrinkage that occurs in mouldings produced by an SL mould as compared to those produced from an aluminium mould. The experiments utilise two very different types of polymers and two mould geometries, which are 2 processed in the same manner so that the heat transfer characteristics of the moulds are isolated as the only experimental variable. The work demonstrates how the two mould materials exhibit very different rates of expansion due to the temperature profiles experienced during moulding. This expansion must be compensated for to establish the total amount of shrinkage incurred by moulded parts. The compensation is derived by a mathematical approach and by modelling using finite element analysis. Both techniques depend upon knowledge of the thermal conditions during moulding. Knowledge of these thermal conditions are obtained by real-time data acquisition and simulated by FEA modeling. The application of the findings provide knowledge of the complete shrinkage values relating to the mould material and polymer used which would enable the production of geometrically accurate parts

'It's not worth the fight': Fathers' perceptions of family mealtime interactions, feeding practices and child eating behaviours

Fathers' perceptions of feeding children are rarely considered in the literature, yet there is growing recognition of their unique contribution to the family feeding environment. This study aimed to explore fathers' perceptions, beliefs, attitudes and lived experiences of mealtime interactions with children and other family members. Fathers (N = 27) of children aged ≤12 years old were recruited from occupationally diverse workplaces and participated in six focus groups on-site at the fathers' workplaces. Using grounded theory, we show that fathers' connection to children at mealtimes influenced how they perceived and responded to child eating behaviours. Three major themes were identified in fathers' experiences of mealtime interactions: (i) valuing connection and communication; (ii) expectations and perceptions of child eating behaviours, and (iii) feeding practices used in an attempt to align their mealtime expectations to reality. Fathers' connections were informed by their mealtime goals, historical feeding interactions with their child and intergenerational transmission of cultural values. These values were communicated between father and child through verbal (e.g. conversations) and structural (e.g. being present at meals) cues. Fathers described challenging child behaviours that disrupted mealtime connections, such as food refusal or the use of digital devices. Awareness of child food preferences, distractors, time, personal or child mood, and guilt triggered fathers' adjustment of their feeding practices, often in an effort to avoid mealtime conflict. Fathers tended to describe their feeding practices within the context of mothers' feeding practices and mealtime participation. The values that underpin fathers’ connection to family mealtimes can be leveraged to inform culturally-appropriate interventions that facilitate positive, shared family meals to support child health and development

Layer thickness and draft angle selection for stereolithography injection mould tooling

The introduction of rapid prototyping has allowed engineers and designers to generate physical models of required parts very early on in the design and development phase. Further to this, the use of stereolithography (SL) cavities as a rapid tooling method has allowed plastic prototype parts to be produced in their most common production manner -- by injection moulding. The process is best suited to small production runs where the high costs of conventionally machined tooling is prohibitive. One of the major drawbacks of the SL injectionmoulding process is the susceptibility of the tools to premature failure. SL tools may break under the force exerted by part ejection when the friction between a moulding and a core is greater than the tensile strength of the core, resulting in tensile failure. Very few justified recommendations exist about the choice of mould design variables that can lower the part ejection force experienced and reduce the risk of SL tool failure. This research investigates the ejection forces resulting from SL injection moulding tools which are identical in all respects except for their build layer thickness and incorporated draft angles in an attempt to identify appropriate evidence for recommendations with respect to these design variables and SL injection moulding. The results show that adjustment of draft angle results in a change of part ejection force as a reasonably linear relationship. An adjustment of the build layer thickness results in a change in part ejection force as a more non-linear relationship. The adjustment of build layer thickness had a greater effect on ejection force than the adjustment of draft angle. The results also show that the surface roughness of all tools remains unchanged after moulding a number of parts in polypropylene. A mathematical model was used in an attempt to predict ejection forces according to the moulding material used. This model reflected the experimental results in terms of relative values but not in absolute values, which may be due to inappropriate specific values used in their calculation. Finite element analysis (FEA) was used in an attempt to identify the factors involved in the ejection process. Results indicate that the effect of draft angle on ejection force is due to elastic deformation of the surface roughness. A fact borne out by the lack of damage to the surface after ejection

Expansion in SL_d(Z/qZ), q arbitrary

Let S be a fixed finite symmetric subset of SL_d(Z), and assume that it generates a Zariski-dense subgroup G. We show that the Cayley graphs of pi_q(G) with respect to the generating set pi_q(S) form a family of expanders, where pi_q is the projection map Z->Z/qZ

Real-time nonequilibrium dynamics in hot QED plasmas: dynamical renormalization group approach

We study the real-time nonequilibrium dynamics in hot QED plasmas implementing a dynamical renormalization group and using the hard thermal loop (HTL) approximation. The focus is on the study of the relaxation of gauge and fermionic mean fields and on the quantum kinetics of the photon and fermion distribution functions. For semihard photons of momentum eT << k << T we find to leading order in the HTL that the gauge mean field relaxes in time with a power law as a result of infrared enhancement of the spectral density near the Landau damping threshold. The dynamical renormalization group reveals the emergence of detailed balance for microscopic time scales larger than 1/k while the rates are still varying with time. The quantum kinetic equation for the photon distribution function allows us to study photon production from a thermalized quark-gluon plasma (QGP) by off-shell effects. We find that for a QGP at temperature T ~ 200 MeV and of lifetime 10 < t < 50 fm/c the hard (k ~ T) photon production from off-shell bremsstrahlung (q -> q \gamma and \bar{q} -> \bar{q}\gamma) at O(\alpha) grows logarithmically in time and is comparable to that produced from on-shell Compton scattering and pair annihilation at O(\alpha \alpha_s). Fermion mean fields relax as e^{-\alpha T t ln(\omega_P t)} with \omega_P=eT/3 the plasma frequency, as a consequence of the emission and absorption of soft magnetic photons. A quantum kinetic equation for hard fermions is obtained directly in real time from a field theoretical approach improved by the dynamical renormalization group. The collision kernel is time-dependent and infrared finite.Comment: RevTeX, 46 pages, including 5 EPS figures, published versio

Network patterns and strength of orbital currents in layered cuprates

In a frame of the $t-J-G$ model we derive the microscopical expression for the circulating orbital currents in layered cuprates using the anomalous correlation functions. In agreement with $\mu$-on spin relaxation ($\mu$SR), nuclear quadrupolar resonance (NQR) and inelastic neutron scattering(INS) experiments in YBa$_2$Cu$_3$O$_{6+x}$ we successfully explain the order of magnitude and the monotonous increase of the {\it internal} magnetic fields resulting from these currents upon cooling. However, the jump in the intensity of the magnetic fields at T$_c$ reported recently seems to indicate a non-mean-field feature in the coexistence of current and superconducting states and the deviation of the extended charge density wave vector instability from its commensurate value {\bf Q}$\approx(\pi,\pi$) in accordance with the reported topology of the Fermi surface

The N-methyl-d-aspartate receptor antagonist CPP alters synapse and spine structure and impairs long-term potentiation and long-term depression induced morphological plasticity in dentate gyrus of the awake rat

Long-term morphological synaptic changes associated with homosynaptic long-term potentiation (LTP) and heterosynaptic long-term depression (LTD) in vivo, in awake adult rats were analyzed using three-dimensional (3-D) reconstructions of electron microscope images of ultrathin serial sections from the molecular layer of the dentate gyrus. For the first time in morphological studies, the specificity of the effects of LTP and LTD on both spine and synapse ultrastructure was determined using an N-methyl-d-aspartate (NMDA) receptor antagonist CPP (3-[(R)-2-carboxypiperazin-4-yl]-propyl-1-phosphonic acid). There were no differences in synaptic density 24 h after LTP or LTD induction, and CPP alone had no effect on synaptic density. LTP increased significantly the proportion of mushroom spines, whereas LTD increased the proportion of thin spines, and both LTP and LTD decreased stubby spine number. Both LTP and LTD increased significantly spine head evaginations (spinules) into synaptic boutons and CPP blocked these changes. Synaptic boutons were smaller after LTD, indicating a pre-synaptic effect. Interestingly, CPP alone decreased bouton and mushroom spine volumes, as well as post-synaptic density (PSD) volume of mushroom spines.These data show similarities, but also some clear differences, between the effects of LTP and LTD on spine and synaptic morphology. Although CPP blocks both LTP and LTD, and impairs most morphological changes in spines and synapses, CPP alone was shown to exert effects on aspects of spine and synaptic structure