1,797 research outputs found
A new 2-D model of a thin annular disk using a modified assumption
The work describes an improved 2-D model for a thin annulus by using a modified assumption with regard to coupled vibration. With this approach, the impedance spectrum and displacements due to radial modes, both in radial and thickness direction of a thin ring, are obtained. Bending displacement is investigated by finite element analysis (FEA) and matches our model. The bending in the thickness direction is coupled to radial modes and shows several node circles in the high radial overtone frequency range. The model is validated by FEA with excellent agreement between the new theory and FEA result
Electromagnetic vibration energy harvesting using an improved Halbach array
This paper reports an electromagnetic vibration energy harvester using an improved Halbach array. A Halbach array is a specific arrangement of permanent magnets that concentrates the magnetic field on one side of the array while cancelling the field on the other side to almost zero. Previous research showed that although the Halbach array has higher magnetic field density compared to normal magnet layouts, its magnetic flux gradient is not as high. Thus, output powers of energy harvesters with Halbach arrays were found to be less than those with normal magnet layouts. This paper proposes an improved Halbach array that achieves both high magnetic field strength and magnetic flux gradient. Test results showed that the improved Halbach array can increase the output power of energy harvesters by a factor of seven compared to the previous Halbach design and by a factor of 1.5 compared to the normal configuration
Recommended from our members
Optimal Blending Quality
This paper discusses a functional program developed for product blending. The program is installed at a Savannah River Plant production site on their VAX computer. A wide range of blending choices is available. The program can be easily changed or expanded. The technology can be applied at other areas where mixing or blending is done
Recommended from our members
DWPF Sample Vial Insert Study-Statistical Analysis of DWPF Mock-Up Test Data
This report is prepared as part of Technical/QA Task Plan WSRC-RP-97-351 which was issued in response to Technical Task Request HLW/DWPF/TTR-970132 submitted by DWPF. Presented in this report is a statistical analysis of DWPF Mock-up test data for evaluation of two new analytical methods which use insert samples from the existing HydragardTM sampler. The first is a new hydrofluoric acid based method called the Cold Chemical Method (Cold Chem) and the second is a modified fusion method.Either new DWPF analytical method could result in a two to three fold improvement in sample analysis time.Both new methods use the existing HydragardTM sampler to collect a smaller insert sample from the process sampling system. The insert testing methodology applies to the DWPF Slurry Mix Evaporator (SME) and the Melter Feed Tank (MFT) samples.The insert sample is named after the initial trials which placed the container inside the sample (peanut) vials. Samples in small 3 ml containers (Inserts) are analyzed by either the cold chemical method or a modified fusion method. The current analytical method uses a HydragardTM sample station to obtain nearly full 15 ml peanut vials. The samples are prepared by a multi-step process for Inductively Coupled Plasma (ICP) analysis by drying, vitrification, grinding and finally dissolution by either mixed acid or fusion. In contrast, the insert sample is placed directly in the dissolution vessel, thus eliminating the drying, vitrification and grinding operations for the Cold chem method. Although the modified fusion still requires drying and calcine conversion, the process is rapid due to the decreased sample size and that no vitrification step is required.A slurry feed simulant material was acquired from the TNX pilot facility from the test run designated as PX-7.The Mock-up test data were gathered on the basis of a statistical design presented in SRT-SCS-97004 (Rev. 0). Simulant PX-7 samples were taken in the DWPF Analytical Cell Mock-up Facility using 3 ml inserts and 15 ml peanut vials. A number of the insert samples were analyzed by Cold Chem and compared with full peanut vial samples analyzed by the current methods. The remaining inserts were analyzed by the modified fusion method, for comparison to the current method, and also to obtain a calcine correction factor. The simulant was within 40 - 42 wt% solids in order to provide a rheology within the DWPF design range. The rheology at 42 wt% was approximately 47 dynes/cm2 yield stress at 251/4C
New Detections of Optical Emission from Kiloparsec-scale Quasar Jets
We report initial results from the detection of optical emission in the
arcsecond-scale radio jets of two quasars utilizing images from the {\it Hubble
Space Telescope} archive. The optical emission has a very knotty appearance and
is consistent with synchrotron emission from highly relativistic electrons in
the jet. Combining these observations with those of previously reported
features in other quasars, an emerging trend appears to be that their
radio-to-optical spectral indices are steeper than those of similar features in
jets of lower power radio sources.Comment: 4 pgs, 2 figs, Proc of The Physics of Relativistic Jets in the
Chandra and XMM Era workshop, eds. G. Brunetti, D.E. Harris, R.M. Sambruna,
and G. Setti, submitted to New Astronomy Review. Quality of figure 1 degraded
to fit into preprint server. Includes elsart.cls fil
PROMPT RADIATION EFFECTS ON CABLES AND LINEAR POWER INSTRUMENTATION CHANNELS
Tests were conducted to determine the amount of error introduced in reactor power data by radiation-induced voltages in cables and electrometer preamplifier chassis. The results, obtained near the central exposure facility of the KEWB (Reacter Safety Experiments), showed no observable radiation effects under the conditions of present use. Cable insulation resistance was measured during the radiation bursts. (C.J.G.
Mitochondrial function and oxygen supply in normal and in chronically ischemic muscle: A combined 31P magnetic resonance spectroscopy and near infrared spectroscopy study in vivo
AbstractPurpose: We used 31P magnetic resonance spectroscopy (MRS) and near-infrared spectroscopy (NIRS) as a means of quantifying abnormalities in calf muscle oxygenation and adenosine triphosphate (ATP) turnover in peripheral vascular disease (PVD). Methods: Eleven male patients with PVD (mean age, 65 years; range, 55-76 years) and nine male control subjects of similar age were observed in a case-control study in vascular outpatients. Inclusion criteria were more than 6 months' calf claudication (median, 1.5 years; range, 0.6-18 years); proven femoropopliteal or iliofemoral occlusive or stenotic disease; maximum treadmill walking distance (2 km/h, 10° gradient) of 50 to 230 m (mean, 112 m); ankle-brachial pressure index of 0.8 or less during exercise (mean, 0.47; range, 0.29-0.60). Exclusion criteria included diabetes mellitus, anemia, and magnet contraindications. Simultaneous 31P MRS and NIRS of lateral gastrocnemius was conducted during 2 to 4 minutes of voluntary 0.5 Hz isometric plantarflexion at 50% and 75% maximum voluntary contraction force (MVC), followed by 5 minutes recovery. Each subject was studied three times, and the results were combined. Results: Compared with control subjects, patients with PVD showed (1) normal muscle cross-sectional area, MVC, ATP turnover, and contractile efficiency (ATP turnover per force/area); (2) larger phosphocreatine (PCr) changes during exercise (ie, increased shortfall of oxidative ATP synthesis) and slower PCr recovery (47% ± 7% [mean ± SEM] decrease in functional capacity for oxidative ATP synthesis, P =.001); (3) faster deoxygenation during exercise and slower postexercise reoxygenation (59% ± 7% decrease in rate constant, P =.0009), despite reduced oxidative ATP synthesis; (4) correlation between PCr and NIRS recovery rate constants (P <.02); and (5) correlations between smaller walking distance, slower PCr recovery, and reduced MVC (P <.001). The precision of the key measurements (rate constants and contractile efficiency) was 12% to 18% interstudy and 30% to 40% intersubject. Conclusion: The primary lesion in oxygen supply dominates muscle metabolism. Reduced force-generation in patients who are affected more may protect muscle from metabolic stress. (J Vasc Surg 2001;34:1103-10.
Generation of entangled states and error protection from adiabatic avoided level crossings
We consider the environment-affected dynamics of self-interacting
particles living in one-dimensional double wells. Two topics are dealt with.
First, we consider the production of entangled states of two-level systems. We
show that by adiabatically varying the well biases we may dynamically generate
maximally entangled states, starting from initially unentangled product states.
Entanglement degradation due to a common type of environmental influence is
then computed by solving a master equation. However, we also demonstrate that
entanglement production is unaffected if the system-environment coupling is of
the type that induces ``motional narrowing''. As our second but related topic,
we construct a different master equation that seamlessly merges error
protection/detection dynamics for quantum information with the environmental
couplings responsible for producing the errors in the first place. Adiabatic
avoided crossing schemes are used in both topics.Comment: 14 pages, 6 figures. Minor changes. To appear in Phys. Rev.
- …