Physical and Electrochemical Area Determination of Electrodeposited Ni, Co, and NiCo Thin Films

The surface area of electrodeposited thin films of Ni, Co, and NiCo was evaluated using electrochemical double-layer capacitance, electrochemical area measurements using the [Ru(NH$_3$)$_6$]$^{3+}$/[Ru(NH$_3$)$_6$]$^{2+}$ redox couple, and topographic atomic force microscopy (AFM) imaging. These three methods were compared to each other for each composition separately and for the entire set of samples regardless of composition. Double-layer capacitance measurements were found to be positively correlated to the roughness factors determined by AFM topography. Electrochemical area measurements were found to be less correlated with measured roughness factors as well as applicable only to two of the three compositions studied. The results indicate that in situ double-layer capacitance measurements are a practical, versatile technique for estimating the accessible surface area of a metal sample.Comment: Accepted for publication in Nano Convergence, 6 figure

Dealloying Behavior of NiCo and NiCoCu Thin Films

Porous metals and alloys, such as those fabricated via electrochemical dealloying, are of interest for a variety of energy applications, ranging from their potential for enhanced catalytic behavior to their use as high surface area supports for pseudocapacitor materials. Here, the electrochemical dealloying process was explored for electrodeposited binary NiCo and ternary NiCoCu thin films. For each of the four different metal ratios, films were dealloyed using linear sweep voltammetry to various potentials in order to gain insight into the evolution of the film over the course of the linear sweep. Electrochemical capacitance, scanning electron microscopy, and energy dispersive X-ray spectroscopy were used to examine the structure and composition of each sample before and after linear sweep voltammetry was performed. For NiCo films, dealloying resulted in almost no change in composition but did result in an increased capacitance, with greater increases occurring at higher linear sweep potentials, indicating the removal of material from the films. Dealloying also resulted in the appearance of large pores on the surface of the high nickel percentage NiCo films, while low nickel percentage NiCo films had little observable change in morphology. For NiCoCu films, Cu was almost completely removed at linear sweep potentials greater than 0.5 V versus Ag/AgCl. The linear sweep removed large Cu-rich dendrites from the films, while also causing increases in measured capacitance

Hydrogen Evolution Reaction Measurements of Dealloyed Porous NiCu

Porous metals are of interest for their high surface area and potential for enhanced catalytic behavior. Electrodeposited NiCu thin films with a range of compositions were electrochemically dealloyed to selectively remove the Cu component. The film structure, composition, and reactivity of these samples were characterized both before and after the dealloying step using scanning electron microscopy, energy-dispersive spectroscopy, and electrochemical measurements. The catalytic behavior of the dealloyed porous Ni samples towards the hydrogen evolution reaction was measured and compared to that of the as-deposited samples. The dealloyed samples were generally more reactive than their as-deposited counterparts at low overpotentials, making the dealloying procedure a promising area of exploration for improved hydrogen evolution catalysts

An Electrochemical Cell for the Efficient Turn Around of Wafer Working Electrodes

We present a new design for an electrochemical cell for use with wafer working electrodes. The key feature of the design is the use of half turn thumb screws to form a liquid-tight seal between an o-ring and the sample surface. The assembly or disassembly of the cell requires a half turn of each thumb screw, which facilitates the quick turn around of wafer samples. The electrochemical performance of the cell is demonstrated by cyclic voltammetry and double step chronoamperometry measurements of the ferricyanide/ferrocyanide couple

Hydrogen evolution reaction measurements of dealloyed porous NiCu

Abstract Porous metals are of interest for their high surface area and potential for enhanced catalytic behavior. Electrodeposited NiCu thin films with a range of compositions were electrochemically dealloyed to selectively remove the Cu component. The film structure, composition, and reactivity of these samples were characterized both before and after the dealloying step using scanning electron microscopy, energy-dispersive spectroscopy, and electrochemical measurements. The catalytic behavior of the dealloyed porous Ni samples towards the hydrogen evolution reaction was measured and compared to that of the as-deposited samples. The dealloyed samples were generally more reactive than their as-deposited counterparts at low overpotentials, making the dealloying procedure a promising area of exploration for improved hydrogen evolution catalysts

Analysis of Electrodeposited Nickel-Iron Alloy Film Composition Using Particle-Induced X-Ray Emission

The elemental composition of electrodeposited NiFe thin films was analyzed with particle-induced X-ray emission (PIXE). The thin films were electrodeposited on polycrystalline Au substrates from a 100mM NiSO4, 10 mM FeSO4, 0.5M H3BO3, and 1M Na2SO4 solution. PIXE spectra of these films were analyzed to obtain relative amounts of Ni and Fe as a function of deposition potential and deposition time. The results show that PIXE can measure the total deposited metal in a sample over at least four orders of magnitude with similar fractional uncertainties. The technique is also sensitive enough to observe the variations in alloy composition due to sample nonuniformity or variations in deposition parameters

Gene response profiles for Daphnia pulex exposed to the environmental stressor cadmium reveals novel crustacean metallothioneins

<p>Abstract</p> <p>Background</p> <p>Genomic research tools such as microarrays are proving to be important resources to study the complex regulation of genes that respond to environmental perturbations. A first generation cDNA microarray was developed for the environmental indicator species <it>Daphnia pulex</it>, to identify genes whose regulation is modulated following exposure to the metal stressor cadmium. Our experiments revealed interesting changes in gene transcription that suggest their biological roles and their potentially toxicological features in responding to this important environmental contaminant.</p> <p>Results</p> <p>Our microarray identified genes reported in the literature to be regulated in response to cadmium exposure, suggested functional attributes for genes that share no sequence similarity to proteins in the public databases, and pointed to genes that are likely members of expanded gene families in the <it>Daphnia </it>genome. Genes identified on the microarray also were associated with cadmium induced phenotypes and population-level outcomes that we experimentally determined. A subset of genes regulated in response to cadmium exposure was independently validated using quantitative-realtime (Q-RT)-PCR. These microarray studies led to the discovery of three genes coding for the metal detoxication protein metallothionein (MT). The gene structures and predicted translated sequences of <it>D. pulex </it>MTs clearly place them in this gene family. Yet, they share little homology with previously characterized MTs.</p> <p>Conclusion</p> <p>The genomic information obtained from this study represents an important first step in characterizing microarray patterns that may be diagnostic to specific environmental contaminants and give insights into their toxicological mechanisms, while also providing a practical tool for evolutionary, ecological, and toxicological functional gene discovery studies. Advances in <it>Daphnia </it>genomics will enable the further development of this species as a model organism for the environmental sciences.</p

Best practices for virtual participation in meetings : experiences from synthesis centers

Publisher PDFPeer reviewe

Discovery and Optimisation of a Compound Series active against Trypanosoma cruzi, the causative agent of Chagas’ Disease

Chagas disease is caused by the protozoan parasite; Trypanosoma cruzi; . It is endemic in South and Central America and recently has been found in other parts of the world, due to migration of chronically infected patients. The current treatment for Chagas disease is not satisfactory, and there is a need for new treatments. In this work, we describe the optimization of a hit compound resulting from the phenotypic screen of a library of compounds against; T. cruzi; . The compound series was optimized to the level where it had satisfactory pharmacokinetics to allow an efficacy study in a mouse model of Chagas disease. We were able to demonstrate efficacy in this model, although further work is required to improve the potency and selectivity of this series