Effects of impingement of rocket exhaust gases and solid particles on a spacecraft Interim report, Mar. 18 - Oct. 25, 1966

Impingement damage to spacecraft from rocket exhaust gases and micron sized metal particle

Ground simulation and tunnel blockage for a jet-flapped, basic STOL model tested to very high lift coefficients

Ground effects experiments and large/small-tunnel interference studies were carried out on a model with a 20-inch (50.8 cm) span wing. The wing, which includes a highly deflected knee-blown flap can be fitted with unflapped tips and slats. A low-mounted tailplane can be fitted to the aft fuselage. Three-component balance meaurements, made with a fixed ground equipped with a single boundary-layer blowing slot, were compared with datum, moving-ground results. Good comparisons were obtained up to model blowing momentum coefficients of approximately two, after which the particular floor blowing settings used proved insufficient to prevent floor separation in the vicinity of the model. Skin friction measurements, taken routinely along the floor centerline, proved invaluable during the analysis of results, and their use is recommended as input to determination of floor BLC setting. A careful investigation was made of pitching moments, including tail-on, close-to-ground cases, with favorable results. Drag proved the most sensitive to the change from a moving to the boundary-layer controlled ground

Infinite Degeneracy of States in Quantum Gravity

The setting of Braided Ribbon Networks is used to present a general result in spin-networks embedded in manifolds: the existence of an infinite number of species of conserved quantities. Restricted to three-valent networks the number of such conserved quantities in a given network is shown to be invariant barring a single case. The implication of these conserved quantities is discussed in the context of Loop Quantum Gravity.Comment: 10 pages, 14 figures, v2: some clarifications, no substantial change

Minimal detectable change for mobility and patient-reported tools in people with osteoarthritis awaiting arthroplasty

Background: Thoughtful use of assessment tools to monitor disease requires an understanding of clinimetric properties. These properties are often under-reported and, thus, potentially overlooked in the clinic. This study aimed to determine the minimal detectable change (MDC) and coefficient of variation per cent (CV%) for tools commonly used to assess the symptomatic and functional severity of knee and hip osteoarthritis. Methods. We performed a test-retest study on 136 people awaiting knee or hip arthroplasty at one of two hospitals. The MDC95 (the range over which the difference [change] for 95% of patients is expected to lie) and the coefficient of variation per cent (CV%) for the visual analogue scale (VAS) for joint pain, the six-minute walk test (6MWT), the timed up-and-go (TUG) test, the Knee Injury and Osteoarthritis Outcome Score (KOOS) and the Hip Disability and Osteoarthritis Outcome Score (HOOS) subscales were calculated. Results: Knee cohort (n = 75) - The MDC 95 and CV% values were as follows: VAS 2.8 cm, 15%; 6MWT 79 m, 8%; TUG +/-36.7%, 13%; KOOS pain 20.2, 19%; KOOS symptoms 24.1, 22%; KOOS activities of daily living 20.8, 17%; KOOS quality of life 26.6, 44. Hip cohort (n = 61) - The MDC95 and CV% values were as follows: VAS 3.3 cm, 17%; 6MWT 81.5 m, 9%; TUG +/-44.6%, 16%; HOOS pain 21.6, 22%; HOOS symptoms 22.7, 19%; HOOS activities of daily living 17.7, 17%; HOOS quality of life 24.4, 43%. Conclusions: Distinguishing real change from error is difficult in people with severe osteoarthritis. The 6MWT demonstrates the smallest measurement error amongst a range of tools commonly used to assess disease severity, thus, has the capacity to detect the smallest real change above measurement error in everyday clinical practice. © 2014 Naylor et al.; licensee BioMed Central Ltd

Giant gravitons in AdS/CFT (I): matrix model and back reaction

In this article we study giant gravitons in the framework of AdS/CFT correspondence. First, we show how to describe these configurations in the CFT side using a matrix model. In this picture, giant gravitons are realized as single excitations high above a Fermi sea, or as deep holes into it. Then, we give a prescription to define quasi-classical states and we recover the known classical solution associated to the CFT dual of a giant graviton that grows in AdS. Second, we use the AdS/CFT dictionary to obtain the supergravity boundary stress tensor of a general state and to holographically reconstruct the bulk metric, obtaining the back reaction of space-time. We find that the space-time response to all the supersymmetric giant graviton states is of the same form, producing the singular BPS limit of the three charge Reissner-Nordstr\"om-AdS black holes. While computing the boundary stress tensor, we comment on the finite counterterm recently introduced by Liu and Sabra, and connect it to a scheme-dependent conformal anomaly.Comment: 28 pages, JHEP3 class. v2: typos corrected and references adde

Grasping rules and semiclassical limit of the geometry in the Ponzano-Regge model

We show how the expectation values of geometrical quantities in 3d quantum gravity can be explicitly computed using grasping rules. We compute the volume of a labelled tetrahedron using the triple grasping. We show that the large spin expansion of this value is dominated by the classical expression, and we study the next to leading order quantum corrections.Comment: 18 pages, 1 figur

Branes wrapping Black Holes

We examine the dynamics of extended branes, carrying lower dimensional brane charges, wrapping black holes and black hole microstates in M and Type II string theory. We show that they have a universal dispersion relation typical of threshold bound states with a total energy equal to the sum of the contributions from the charges. In near-horizon geometries of black holes, these are BPS states, and the dispersion relation follows from supersymmetry as well as properties of the conformal algebra. However they break all supersymmetries of the full asymptotic geometries of black holes and microstates. We comment on a recent proposal which uses these states to explain black hole entropy.Comment: 41 pages, 2 figures;v2: references adde

On the complexity of color-avoiding site and bond percolation

The mathematical analysis of robustness and error-tolerance of complex networks has been in the center of research interest. On the other hand, little work has been done when the attack-tolerance of the vertices or edges are not independent but certain classes of vertices or edges share a mutual vulnerability. In this study, we consider a graph and we assign colors to the vertices or edges, where the color-classes correspond to the shared vulnerabilities. An important problem is to find robustly connected vertex sets: nodes that remain connected to each other by paths providing any type of error (i.e. erasing any vertices or edges of the given color). This is also known as color-avoiding percolation. In this paper, we study various possible modeling approaches of shared vulnerabilities, we analyze the computational complexity of finding the robustly (color-avoiding) connected components. We find that the presented approaches differ significantly regarding their complexity.Comment: 14 page

Physical boundary state for the quantum tetrahedron

We consider stability under evolution as a criterion to select a physical boundary state for the spinfoam formalism. As an example, we apply it to the simplest spinfoam defined by a single quantum tetrahedron and solve the associated eigenvalue problem at leading order in the large spin limit. We show that this fixes uniquely the free parameters entering the boundary state. Remarkably, the state obtained this way gives a correlation between edges which runs at leading order with the inverse distance between the edges, in agreement with the linearized continuum theory. Finally, we give an argument why this correlator represents the propagation of a pure gauge, consistently with the absence of physical degrees of freedom in 3d general relativity.Comment: 20 pages, 6 figure