Do structured methods help eco-innovation: An evaluation of the product ideas tree diagram

This paper reports on the first test of the Product Ideas Tree diagram (PIT): a structured method aimed to help Eco-innovation. The PIT diagram structures ideas output from chaotic idea generating sessions. This study compared four ways of conducting an Eco-innovation workshop. The results show that structured methods help Eco-innovation by improving the constructive communication between the participants. Further development of the PIT diagram promises to contribute several new approaches to sustainable product and process design

Mineral resource information in support of national, regional and local planning : Gloucestershire (comprising Gloucestershire and South Gloucestershire)

This report is one of a series prepared by the British Geological Survey for various administrative areas in England for the Office of the Deputy Prime Minister’s research project Mineral Resource Information in Support of National, Regional and Local Planning. The accompanying map relates to the county of Gloucestershire, comprising Gloucestershire and South Gloucestershire, and delineates the mineral resources of current, or potential, economic interest in the area and the sites where minerals are or have been worked. It also relates these to national planning designations, which may represent constraints on the extraction of minerals. Three major elements of information are presented: • the geological distribution and importance of mineral resources; • the extent of mineral planning permissions and the location of current mineral workings; and • the extent of selected, nationally-designated planning constraints. This wide range of information, much of which is scattered and not always available in a consistent and convenient form, is presented on a digitally-generated summary map on the scale of 1:100 000. This scale is convenient for the overall display of the data and allows for a legible topographic base on which to depict the information. However, all the data are held digitally at larger scales using a Geographical Information System (GIS), which allows easy revision, updating and customisation of the information together with its possible integration with other datasets. The information will form part of a Summary of the Mineral Resources of the South West Region. The purpose of the work is to assist all interested parties involved in the preparation and review of development plans, both in relation to the extraction of minerals and the protection of mineral resources from sterilisation. It provides a knowledge base, in a consistent format, on the nature and extent of mineral resources and the environmental constraints, which may affect their extraction. An important objective is to provide baseline data for the long term. The results may also provide a starting point for discussions on specific planning proposals for mineral extraction or on proposals, which may sterilise resources. It is anticipated that the maps and report will also provide valuable background data for a much wider audience, including the different sectors of the minerals industry, other agencies and authorities (e.g. The Planning Inspectorate Agency, the Environment Agency, the Countryside Agency and English Nature), environmental interests and the general public. Basic mineral resource information is essential to support mineral exploration and development activities, for resource management and land-use planning, and to establish baseline data for environmental impact studies and environmental guidelines. It also enables a more sustainable pattern and standard of development to be achieved by valuing mineral resources as national assets. The mineral resources covered are sand and gravel, bedrock sand, crushed rock aggregate, building stone, hydrocarbons, and coal

Directed transport in a ratchet with internal and chemical freedoms

We consider mechanisms of directed transport in a ratchet model comprising, besides the external freedom where transport occurs, a chemical freedom that replaces the familiar external driving by an autonomous dynamics providing energy input, and an internal freedom representing a functional mode of a motor molecule. The dependence of the current on various parameters is studied in numerical simulations of our model. In particular, we point out the role of the internal freedom as a buffer between energy input and output of mechanical work that allows a temporary storage of injected energy and can contribute to the efficiency of current generation.Comment: 7 pages, 9 figure

Mineral resource information in support of national, regional and local planning : Suffolk

This report is one of a series prepared by the British Geological Survey for various administrative areas in England for the Office of the Deputy Prime Minister's research project Mineral Resource Information in Support of National, Regional and Local Planning. The accompanying map relates to the county of Suffolk and delineates the mineral resources of current, or potential, economic interest in the area and the sites where minerals are or have been worked. It also relates these to national planning designations, which may represent constraints on the extraction of minerals. Three major elements of information are presented: • the geological distribution and importance of mineral resources; • the extent of mineral planning permissions and the location of current mineral workings, and • the extent of selected, nationally-designated planning constraints. This wide range of information, much of which is scattered and not always available in a consistent and convenient form, is presented on a digitally-generated summary map on the scale of 1:100 000. This scale is convenient for the overall display of the data and allows for a legible topographic base on which to depict the information. However, all the data are held digitally at larger scales using a Geographical Information System (GIS), which allows easy revision, updating and customisation of the information together with its possible integration with other datasets. The information will form part of a Summary of the Mineral Resources of the East of England Region. The purpose of the work is to assist all interested parties involved in the preparation and review of development plans, both in relation to the extraction of minerals and the protection of mineral resources from sterilisation. It provides a knowledge base, in a consistent format, on the nature and extent of mineral resources and the environmental constraints, which may affect their extraction. An important objective is to provide baseline data for the long term. The results may also provide a starting point for discussions on specific planning proposals for mineral extraction or on proposals, which may sterilise resources. It is anticipated that the maps and report will also provide valuable background data for a much wider audience, including the different sectors of the minerals industry, other agencies and authorities (e.g. The Planning Inspectorate Agency, the Environment Agency, the Countryside Agency and English Nature), environmental interests and the general public. Basic mineral resource information is essential to support mineral exploration and development activities, for resource management and land-use planning, and to establish baseline data for environmental impact studies and environmental guidelines. It also enables a more sustainable pattern and standard of development to be achieved by valuing mineral resources as national assets. The mineral resources covered are sand and gravel, brick clay, hydrocarbons, building stone, chalk and peat

Interactions between perceptions of fatigue, effort and affect decrease knee extensor endurance performance following upper body motor activity, independent of alterations to neuromuscular function

Prior exercise has previously been shown to impair subsequent endurance performance in non‐activated muscles. Declines in the neuromuscular function and altered perceptual/affective responses offer possible mechanisms through which endurance performance may be limited in these remote muscle groups. We thus conducted two experiments to better understand these performance‐limiting mechanisms. In the first experiment, we examined the effect of prior handgrip exercise on the behavioral, perceptual, and affective responses to a sustained, sub‐maximal contraction of the knee extensors. In the second experiment, transcranial magnetic stimulation was used to assess the neuromuscular function of the knee extensors before and after the handgrip exercise. The results of the first experiment demonstrated prior handgrip exercise increased the perceptions of effort and reduced affective valence during the subsequent knee extensor endurance exercise. Both effort and affect were associated with endurance performance. Subjective ratings of fatigue were also increased by the preceding handgrip exercise but were not directly related to knee extensor endurance performance. However, perceptions of fatigue were correlated with heightened effort perception and reduced affect during the knee extensor contraction. In the second experiment, prior handgrip exercise did not significantly alter the neuromuscular function of the knee extensors. The findings of the present study indicate that motor performance in the lower limbs following demanding exercise in the upper body appears to be regulated by complex, cognitive‐emotional interactions, which may emerge independent of altered neuromuscular function. Subjective fatigue states are implicated in the control of perceptual and affective processes responsible for the regulation of endurance performance

Evolution of density perturbations in a realistic universe

Prompted by the recent more precise determination of the basic cosmological parameters and growing evidence that the matter-energy content of the universe is now dominated by dark energy and dark matter we present the general solution of the equation that describes the evolution of density perturbations in the linear approximation. It turns out that as in the standard CDM model the density perturbations grow very slowly during the radiation dominated epoch and their amplitude increases by a factor of about 4000 in the matter and later dark energy dominated epoch of expansion of the universe.Comment: 19 pages, 4 figure

Magnetothemopower study of quasi two-dimensional organic conductor α\alpha-(BEDT-TTF)2_2KHg(SCN)4_4

We have used a low-frequency magneto-thermopower (MTEP) method to probe the high magnetic field ground state behavior of $\alpha$-(BEDT-TTF)$_2$KHg(SCN)$_4$ along all three principal crystallographic axes at low temperatures. The thermopower tensor coefficients ($S_{xx}, S_{yx}$ and $S_{zz}$) have been measured to 30 T, beyond the anomalous low temperature, field-induced transition at 22.5 T. We find a significant anisotropy in the MTEP signal, and also observe large quantum oscillations associated with the de Haas - van Alphen effect. The anisotropy indicates that the ground state properties are clearly driven by mechanisms that occur along specific directions for the in-plane electronic structure. Both transverse and longitudinal magnetothermopower show asymptotic behavior in field, which can be explained in terms of magnetic breakdown of compensated closed orbits.Comment: 9 pages, 10 figure

Inter-ply stitching optimisation of highly drapeable multi-ply preforms

An efficient finite element model has been developed in Abaqus/Explicit to solve highly non-linear fabric forming problems, using a non-orthogonal constitutive relation and membrane elements to model bi-axial fabrics. 1D cable-spring elements have been defined to model localised inter-ply stitch-bonds, introduced to facilitate automated handling of multi-ply preforms. Forming simulation results indicate that stitch placement cannot be optimised intuitively to avoid forming defects. A genetic algorithm has been developed to optimise the stitch pattern, minimising shear deformation in multi-ply stitched preforms. The quality of the shear angle distribution has been assessed using a maximum value criterion (MAXVC) and a Weibull distribution quantile criterion (WBLQC). Both criteria are suitable for local stitch optimisation, producing acceptable solutions towards the global optimum. The convergence rate is higher for MAXVC, while WBLQC is more effective for finding a solution closer to the global optimum. The derived solutions show that optimised patterns of through-thickness stitches can improve the formability of multi-ply preforms compared with an unstitched reference case, as strain re-distribution homogenises the shear angles in each ply

Defect formation during preforming of a bi-axial non-crimp fabric with a pillar stitch pattern

To capture the asymmetrical shear behaviour of a bi-axial NCF with a pillar stitch, a non-orthogonal constitutive model was developed and implemented in finite element forming simulations. Preforming experiments indicate that the local distribution of defects is significantly different on both sides of each bi-axial ply, with two different defect mechanisms observed. Correlation with simulation results indicates that one defect type is caused by excessive shear, inducing out-of-plane wrinkling in regions of positive shear (macro-scale wrinkling). The other defect type is caused by fibre compression, inducing in-plane wrinkling in regions of negative shear (meso-scale wrinkling). Local distributions of shear angle and wrinkling strain were used to determine the wrinkling mode and to confirm the corresponding defect mechanism. Results indicate that simulations based on the advanced constitutive model can predict local shear angles within ±5°of experimental values and that predicted wrinkling positions and defect types correlate well with the experiments

Automated Coronal Hole Detection using Local Intensity Thresholding Techniques

We identify coronal holes using a histogram-based intensity thresholding technique and compare their properties to fast solar wind streams at three different points in the heliosphere. The thresholding technique was tested on EUV and X-ray images obtained using instruments onboard STEREO, SOHO and Hinode. The full-disk images were transformed into Lambert equal-area projection maps and partitioned into a series of overlapping sub-images from which local histograms were extracted. The histograms were used to determine the threshold for the low intensity regions, which were then classified as coronal holes or filaments using magnetograms from the SOHO/MDI. For all three instruments, the local thresholding algorithm was found to successfully determine coronal hole boundaries in a consistent manner. Coronal hole properties extracted using the segmentation algorithm were then compared with in situ measurements of the solar wind at 1 AU from ACE and STEREO. Our results indicate that flux tubes rooted in coronal holes expand super-radially within 1 AU and that larger (smaller) coronal holes result in longer (shorter) duration high-speed solar wind streams