Laser Sintering of Stainless Steel using Resin Powder

We tried laser sintering of 316L stainless steel powder using resin powder. The laser sintering conditions such as laser power, scan speed and scan pitch with a YAG laser, and the influence of additional resin powder on the density and the tensile properties of the sintered alloy were investigated experimentally. The tensile specimen was laser-sintered with a YAG laser, and then debound and sintered in a vacuum furnace. The tensile specimen was successfully fabricated. The relative density and the tensile strength varied with the additional resin powder, and the optimum weight percentage of additional resin powder was around 4%.The relative density of the sintered alloy was approximately 85%, and the tensile strength and elongation of the sintered alloy were more than 280 MPa and 15% respectively.Mechanical Engineerin

Surface Morphology of Selective Laser-Melted Titanium

The surface morphology of biomaterials is one of the most important biocompatibility factors. In this paper, the change in surface morphology of selective laser-melted titanium with process parameters was investigated to control the pore structure and mesh size. First, the process map which shows the relation between the morphology of laser-melted track and the process parameters such as laser power and scan speed was drawn by experiments. The laser-melted layer was fabricated on the basis of the process map. As a result, the surface morphology, especially pore structure and mesh size, of the layer is affected strongly by energy density as well as scan spacing.Mechanical Engineerin

Laser Direct-Write of Nanoporous Optical Coatings: Preliminary Results

Mechanical Engineerin

The sintering, sintered microstructure and mechanical properties of Ti-Fe-Si Alloys

A systematic study has been conducted of the sintering, sintered microstructure and tensile properties of a range of lower cost Ti-Fe-Si alloys, including Ti-3Fe-(0-4)Si, Ti-(3-6)Fe-0.5Si, and Ti-(3-6)Fe-1Si (in wt pct throughout). Small additions of Si (≤1 pct) noticeably improve the as-sintered tensile properties of Ti-3Fe alloy, including the ductility, with fine titanium silicides (TiSi) being dispersed in both the α and β phases. Conversely, additions of >1 pct Si produce coarse and/or networked TiSi silicides along the grain boundaries leading to predominantly intergranular fracture and, hence, poor ductility, although the tensile strength continues to increase because of the reinforcement by TiSi. Increasing the Fe content in the Ti-xFe-0.5/ 1.0Si alloys above 3 pct markedly increases the average grain size and changes the morphology of the α-phase phase to much thinner and more acicular laths. Consequently, the ductility drops t

Cardiac-Specific SOCS3 Deletion Prevents In Vivo Myocardial Ischemia Reperfusion Injury through Sustained Activation of Cardioprotective Signaling Molecules.

Myocardial ischemia reperfusion injury (IRI) adversely affects cardiac performance and the prognosis of patients with acute myocardial infarction. Although myocardial signal transducer and activator of transcription (STAT) 3 is potently cardioprotective during IRI, the inhibitory mechanism responsible for its activation is largely unknown. The present study aimed to investigate the role of the myocardial suppressor of cytokine signaling (SOCS)-3, an intrinsic negative feedback regulator of the Janus kinase (JAK)-STAT signaling pathway, in the development of myocardial IRI. Myocardial IRI was induced in mice by ligating the left anterior descending coronary artery for 1 h, followed by different reperfusion times. One hour after reperfusion, the rapid expression of JAK-STAT-activating cytokines was observed. We precisely evaluated the phosphorylation of cardioprotective signaling molecules and the expression of SOCS3 during IRI and then induced myocardial IRI in wild-type and cardiac-specific SOCS3 knockout mice (SOCS3-CKO). The activation of STAT3, AKT, and ERK1/2 rapidly peaked and promptly decreased during IRI. This decrease correlated with the induction of SOCS3 expression up to 24 h after IRI in wild-type mice. The infarct size 24 h after reperfusion was significantly reduced in SOCS3-CKO compared with wild-type mice. In SOCS3-CKO mice, STAT3, AKT, and ERK1/2 phosphorylation was sustained, myocardial apoptosis was prevented, and the expression of anti-apoptotic Bcl-2 family member myeloid cell leukemia-1 (Mcl-1) was augmented. Cardiac-specific SOCS3 deletion led to the sustained activation of cardioprotective signaling molecules including and prevented myocardial apoptosis and injury during IRI. Our findings suggest that SOCS3 may represent a key factor that exacerbates the development of myocardial IRI

LAYER-WISE IN-PROCESS MONITORING-AND-FEEDBACK SYSTEM BASED ON SURFACE CHARACTERISTICS EVALUATED BY MACHINE-LEARNING-GENERATED CRITERIA

In the laser powder bed fusion (PBF-LB) process, a set of parameters that are considered optimal are selected. Still, a set of parameters cannot accommodate complex model geometries, model placement in the build chamber, and unforeseen circumstances, leading to internal defects. Therefore, a new in-situ monitoring and feedback system has been developed to suppress the occurrence of lack-of-fusion (LOF) defects in the PBF-LB process. This system measures surface properties after each laser irradiation to predict whether LOF defects occur. Then, if necessary, a feedback process is performed to re-melt the same surface. Evaluation thresholds are defined by a combination of aerial surface texture parameters created in advance by machine learning of surface properties and defect occurrence. For example, a square pillar of Inconel 718 alloy built with feedback had a higher relative density than one without feedback.Mechanical Engineerin

Copy number, linkage disequilibrium and disease association in the FCGR locus.

The response of a leukocyte to immune complexes (ICs) is modulated by receptors for the Fc region of IgG (FcgammaRs), and alterations in their affinity or function have been associated with risk of autoimmune diseases, including systemic lupus erythematosus (SLE). The low-affinity FcgammaR genomic locus is complex, containing regions of copy number variation (CNV) which can alter receptor expression and leukocyte responses to IgG. Combined paralogue ratio tests (PRTs) were used to distinguish three intervals within the FCGR locus which undergo CNV, and to determine FCGR gene copy number (CN). There were significant differences in FCGR3B and FCGR3A CNV profiles between Caucasian, East Asian and Kenyan populations. A previously noted association of low FCGR3B CN with SLE in Caucasians was supported [OR = 1.57 (1.08-2.27), P = 0.018], and replicated in Chinese [OR = 1.65 (1.25-2.18), P = 4 x 10(-4)]. There was no association of FCGR3B CNV with vasculitis, nor with malarial or bacterial infection. Linkage disequilibrium (LD) between multi-allelic FCGR3B CNV and SLE-associated SNPs in the FCGR locus was defined for the first time. Despite LD between FCGR3B CNV and a variant in FcgammaRIIB (I232T) which abolishes inhibitory function, both reduced CN of FCGR3B and homozygosity of the FcgammaRIIB-232T allele were individually strongly associated with SLE risk. Thus CN of FCGR3B, which controls IC responses and uptake by neutrophils, and variations in FCGR2B, which controls factors such as antibody production and macrophage activation, are important in SLE pathogenesis. Further interpretations of contributions to pathogenesis by FcgammaRs must be made in the context of LD involving CNV regions

Functional Correlations of Pathogenesis-Driven Gene Expression Signatures in Tuberculosis

Tuberculosis remains a major health threat and its control depends on improved measures of prevention, diagnosis and treatment. Biosignatures can play a significant role in the development of novel intervention measures against TB and blood transcriptional profiling is increasingly exploited for their rational design. Such profiles also reveal fundamental biological mechanisms associated with the pathology of the disease. We have compared whole blood gene expression in TB patients, as well as in healthy infected and uninfected individuals in a cohort in The Gambia, West Africa and validated previously identified signatures showing high similarities of expression profiles among different cohorts. In this study, we applied a unique combination of classical gene expression analysis with pathway and functional association analysis integrated with intra-individual expression correlations. These analyses were employed for identification of new disease-associated gene signatures, identifying a network of Fc gamma receptor 1 signaling with correlating transcriptional activity as hallmark of gene expression in TB. Remarkable similarities to characteristic signatures in the autoimmune disease systemic lupus erythematosus (SLE) were observed. Functional gene clusters of immunoregulatory interactions involving the JAK-STAT pathway; sensing of microbial patterns by Toll-like receptors and IFN-signaling provide detailed insights into the dysregulation of critical immune processes in TB, involving active expression of both pro-inflammatory and immunoregulatory systems. We conclude that transcriptomics (i) provides a robust system for identification and validation of biosignatures for TB and (ii) application of integrated analysis tools yields novel insights into functional networks underlying TB pathogenesis

TLR7 single-nucleotide polymorphisms in the 3' untranslated region and intron 2 independently contribute to systemic lupus erythematosus in Japanese women: a case-control association study

IntroductionThe Toll-like receptor 7 (TLR7) gene, encoded on human chromosome Xp22.3, is crucial for type I interferon production. A recent multicenter study in East Asian populations, comprising Chinese, Korean and Japanese participants, identified an association of a TLR7 single-nucleotide polymorphism (SNP) located in the 3\u27 untranslated region (3\u27 UTR), rs3853839, with systemic lupus erythematosus (SLE), especially in males, although some difference was observed among the tested populations. To test whether additional polymorphisms contribute to SLE in Japanese, we systematically analyzed the association of TLR7 with SLE in a Japanese female population.MethodsA case-control association study was conducted on eight tag SNPs in the TLR7 region, including rs3853839, in 344 Japanese females with SLE and 274 healthy female controls.ResultsIn addition to rs3853839, two SNPs in intron 2, rs179019 and rs179010, which were in moderate linkage disequilibrium with each other (r2 = 0.53), showed an association with SLE (rs179019: P = 0.016, odds ratio (OR) 2.02, 95% confidence interval (95% CI) 1.15 to 3.54; rs179010: P = 0.018, OR 1.75, 95% CI 1.10 to 2.80 (both under the recessive model)). Conditional logistic regression analysis revealed that the association of the intronic SNPs and the 3\u27 UTR SNP remained significant after we adjusted them for each other. When only the patients and controls carrying the risk genotypes at the 3\u27 UTR SNPpositionwere analyzed, the risk of SLE was significantly increased when the individuals also carried the risk genotypes at both of the intronic SNPs (P = 0.0043, OR 2.45, 95% CI 1.31 to 4.60). Furthermore, the haplotype containing the intronic risk alleles in addition to the 3\u27 UTR risk allele was associated with SLE under the recessive model (P = 0.016, OR 2.37, 95% CI 1.17 to 4.80), but other haplotypes were not associated with SLE.ConclusionsThe TLR7 intronic SNPs rs179019 and rs179010 are associated with SLE independently of the 3\u27 UTR SNP rs3853839 in Japanese women. Our findings support a role of TLR7 in predisposition for SLE in Asian populations