Time-domain sensitivity enhancement in pulsed Pb-TDL gas monitors

A Pb-salt tunable diode laser (TDL) has found many applications in the field of atmospheric gas analysis. Its continuous tunablility and fine spectral purity in the mid infrared region are outstanding from other lasers. The only shortcoming is that it requires cryogenic operating temperatures, though, it is improved year by year towards the room temperature operation. A repeated pulse operation of Pb salt diode lasers is possible with a thermoelectric cooling device, which allows an instrument a portable geometry disusing a heavy, bulky and power consuming mechanical refrigerator. A derivative spectrometry was exploiting the quick tunability of Pb salt diode lasers, though they are continuous wave (cw) operated with refrigerator or liquid nitrogen so far. A new system for derivative spectrometry with a pulsed diode laser will extend its field of applications because of reduced weights and size of measuring instruments. A preliminary results is shown that demonstrates the feasibility of an attempt to implement the derivative spectrmetry with repeatedly pulse driven diode lasers. Atmospheric methane was measured with 8 ppm/m sensitivity. Further results of parametric optimization for the best signal to noise ratios under any given device characteristics as well as for available real devices is given

Generation of polarization entanglement from spatially-correlated photons in spontaneous parametric down-conversion

We propose a novel scheme to generate polarization entanglement from spatially-correlated photon pairs. We experimentally realized a scheme by means of a spatial correlation effect in a spontaneous parametric down-conversion and a modified Michelson interferometer. The scheme we propose in this paper can be interpreted as a conversion process from spatial correlation to polarization entanglement.Comment: 4 pages, 4 figure

A simple model of reactor cores for reactor neutrino flux calculations for the KamLAND experiment

KamLAND is a reactor neutrino oscillation experiment with a very long baseline. This experiment successfully measured oscillation phenomena of reactor antineutrinos coming mainly from 53 reactors in Japan. In order to extract the results, it is necessary to accurately calculate time-dependent antineutrino spectra from all the reactors. A simple model of reactor cores and code implementing it were developed for this purpose. This paper describes the model of the reactor cores used in the KamLAND reactor analysis.Comment: 14 pages, 7 figures, submitted to Nuclear Instruments and Methods in Physics Research

The Expanded Bead Size of Corneal C-Nerve Fibers Visualized by Corneal Confocal Microscopy Is Associated with Slow Conduction Velocity of the Peripheral Nerves in Patients with Type 2 Diabetes Mellitus.

This is the final version of the article. Available from Hindawi Publishing Corporation via the DOI in this record.This study aims to establish the corneal nerve fiber (CNF) morphological alterations in a large cohort of type 2 diabetic patients and to investigate the association between the bead size, a novel parameter representing composite of accumulated mitochondria, glycogen particles, and vesicles in CNF, and the neurophysiological dysfunctions of the peripheral nerves. 162 type 2 diabetic patients and 45 healthy control subjects were studied in detail with a battery of clinical and neurological examinations and corneal confocal microscopy. Compared with controls, patients had abnormal CNF parameters. In particular the patients had reduced density and length of CNF and beading frequency and increased bead size. Alterations in CNF parameters were significant even in patients without neuropathy. The HbA1c levels were tightly associated with the bead size, which was inversely related to the motor and sensory nerve conduction velocity (NCV) and to the distal latency period of the median nerve positively. The CNF density and length positively correlated with the NCV and amplitude. The hyperglycemia-induced expansion of beads in CNF might be a predictor of slow NCV in peripheral nerves in type 2 diabetic patients

Quantum key distribution over 30km of standard fiber using energy-time entangled photon pairs: a comparison of two chromatic dispersion reduction methods

We present a full implementation of a quantum key distribution system using energy-time entangled photon pairs and functioning with a 30km standard telecom fiber quantum channel. Two bases of two orthogonal states are implemented and the setup is quite robust to environmental constraints such as temperature variation. Two different ways to manage chromatic dispersion in the quantum channel are discussed.Comment: 10 pages, 4 figure

Tension-tension testing of a novel mooring rope construction

This is the author accepted manuscript.Synthetic fibre ropes are in widespread use in maritime applications ranging from lifting to temporary and permanent mooring systems for vessels, offshore equipment and platforms. The selection of synthetic ropes over conventional steel components is motivated by several key advantages including selectable axial stiffness, energy absorption (and hence load mitigation), fatigue resistance and low unit cost. The long-term use of ropes as safety critical components in potentially high dynamic loading environments necessitates that new designs are verified using stringent qualification procedures. The International Organization for Standardization (ISO) is one certification body that has produced several guidelines for the testing of synthetic ropes encompassing quasi-static and dynamic loading as well as fatigue cycling. This paper presents the results of tension-tension tests carried out to ISO 2307:2010, ISO 18692:2007(E) and ISO/TS 19336:2015(E) on three different 12-strand rope constructions manufactured by Ashimori Industry Co. Ltd from polyester and Vectran® fibres. The purpose of the tests was to characterise the performance of a novel 12-strand construction and compare this to a conventional 12-strand construction. Utilising the Dynamic Marine Component test facility (DMaC) at the University of Exeter several key performance metrics were determined including; elongation, minimum break load (MBL) and quasi-static and dynamic stiffness. During the ISO 2307:2010(E) test programme the samples were tested dry and during the ISO 18692:2007(E) and ISO/TS 19336:2015(E) test programmes the samples were fully submerged in tap water after being soaked for at least 24 hours. Two methods were used to quantify sample extension: i) an optical tracking system and ii) a draw-wire potentiometer. Axial compression fatigue and cyclic loading endurance tests were also carried out on two Vectran® samples. Further load-to-failure tests and sample analysis were also carried out by Ashimori Industry Co. Ltd. It was found that the MBL of the samples exceeded the values specified by the manufacturer (by 7.7-29.5% for the polyester samples) with failure occurring at the splices in all cases and minor abrasion noted in several locations. The measured MBL of the novel polyester Straight Strand Rope (SSR) construction was up to 16% higher than the conventional construction with increases of quasi-static and dynamic stiffness of up to 6.8%. Differences between the viscoelastic and viscoplastic behaviour of the samples were also noted. The data obtained during these tests will provide insight into the behaviour of these materials and different rope constructions which will be of use to rope manufacturers, mooring system designers in addition to offshore equipment and vessel operators.The authors at the University of Exeter would like to thank their colleagues at Nagasaki University and Ashimori Industry Co. Ltd for being given the opportunity to carry out the interesting work reported in this paper. Through the Peninsula Research Institute for Marine Renewable Energy (PRIMaRE) consortium, the DMaC test facility was funded from the ERDF Convergence programme and South West Regional Development Agenc