14,664 research outputs found
Processing of laser formed SiC powder
Superior SiC characteristics can be achieved through the use of ideal constituent powders and careful post-synthesis processing steps. High purity SiC powders of approx. 1000 A uniform diameter, nonagglomerated and spherical were produced. This required major revision of the particle formation and growth model from one based on classical nucleation and growth to one based on collision and coalescence of Si particles followed by their carburization. Dispersions based on pure organic solvents as well as steric stabilization were investigated. Although stable dispersions were formed by both, subsequent part fabrication emphasized the pure solvents since fewer problems with drying and residuals of the high purity particles were anticipated. Test parts were made by the colloidal pressing technique; both liquid filtration and consolidation (rearrangement) stages were modeled. Green densities corresponding to a random close packed structure (approx. 63%) were achieved; this highly perfect structure has a high, uniform coordination number (greater than 11) approaching the quality of an ordered structure without introducing domain boundary effects. After drying, parts were densified at temperatures ranging from 1800 to 2100 C. Optimum densification temperatures will probably be in the 1900 to 2000 C range based on these preliminary results which showed that 2050 C samples had experienced substantial grain growth. Although overfired, the 2050 C samples exhibited excellent mechanical properties. Biaxial tensile strengths up to 714 MPa and Vickers hardness values of 2430 kg/sq mm 2 were both more typical of hot pressed than sintered SiC. Both result from the absence of large defects and the confinement of residual porosity (less than 2.5%) to small diameter, uniformly distributed pores
Processing of laser formed SiC powder
Processing research was undertaken to demonstrate that superior SiC characteristics could be achieved through the use of ideal constituent powders and careful post-synthesis processing steps. Initial research developed the means to produce approximately 1000 A uniform diameter, nonagglomerated, spherical, high purity SiC powders. Accomplishing this goal required major revision of the particle formation and growth model from one based on classical nucleation and growth to one based on collision and coalescence of Si particles followed by their carburization. Dispersions based on pure organic solvents as well as steric stabilization were investigated. Test parts were made by the colloidal pressing technique; both liquid filtration and consolidation (rearrangement) stages were modeled. Green densities corresponding to a random close packed structure were achieved. After drying, parts were densified at temperatures ranging from 1800 to 2100 C. This research program accomplished all of its major objectives. Superior microstructures and properties were attained by using powders having ideal characteristics and special post-synthesis processing procedures
Eye-controlled ''teletypewriter''
Oculometer provides dynamic measurement of subject's look direction, and its outputs can be used to generate visual display of his look pattern and/or to cause equipment operation associated with his lookpoint at given times. Measured eye-direction information could be used as control input at man/machine interface
Ion yields and erosion rates for Si1−xGex(0x1) ultralow energy O2+ secondary ion mass spectrometry in the energy range of 0.25–1 keV
We report the SIMS parameters required for the quantitative analysis of Si1−xGex across the range of 0 ≤ x ≤ 1 when using low energy O2+ primary ions at normal incidence. These include the silicon and germanium secondary ion yield [i.e., the measured ion signal (ions/s)] and erosion rate [i.e., the speed at which the material sputters (nm/min)] as a function of x. We show that the ratio Rx of erosion rates, Si1−xGex/Si, at a given x is almost independent of beam energy, implying that the properties of the altered layer are dominated by the interaction of oxygen with silicon. Rx shows an exponential dependence on x. Unsurprisingly, the silicon and germanium secondary ion yields are found to depart somewhat from proportionality to (1−x) and x, respectively, although an approximate linear relationship could be used for quantification across around 30% of the range of x (i.e., a reference material containing Ge fraction x would give reasonably accurate quantification across the range of ±0.15x). Direct comparison of the useful (ion) yields [i.e., the ratio of ion yield to the total number of atoms sputtered for a particular species (ions/atom)] and the sputter yields [i.e., the total number of atoms sputtered per incident primary ion (atoms/ions)] reveals a moderate matrix effect where the former decrease monotonically with increasing x except at the lowest beam energy investigated (250 eV). Here, the useful yield of Ge is found to be invariant with x. At 250 eV, the germanium ion and sputter yields are proportional to x for all x
Apparent movement phenomena on CRT displays - Threshold determinations of apparent movements of pulsed light sources
Apparent movement phenomena on cathode ray tube displays - threshold determinations of apparent movements of pulsed light source
Recommended from our members
Electrospray synthesis of PLGA TIPS microspheres
We successfully demonstrate the synthesis of polymer microspheres using a single electrospray source, and show their physical characterisation. Electrospray has proven to be a versatile method to manufacture particles, giving tight control over size with quasi-monodisperse size distributions. It is a liquid atomisation technique that generates a monodisperse population of highly charged liquid droplets over a broad size range (nanometres to tens of microns). The droplets contain liquid precursors for the in-flight synthesis of particles, and control over the trajectory of these droplets can be precisely manipulated with the use of electric fields to drive them to a grounded substrate. This study reports a method to synthesize poly(lactic-co-glycolic) acid (PLGA) microspheres using the electrospray and thermally induced phase separation (TIPS) techniques, followed by subsequent freeze-drying, for particle production. These microspheres are of interest as vehicles for controlled drug release systems
Collisions of boosted black holes: perturbation theory prediction of gravitational radiation
We consider general relativistic Cauchy data representing two nonspinning,
equal-mass black holes boosted toward each other. When the black holes are
close enough to each other and their momentum is sufficiently high, an
encompassing apparent horizon is present so the system can be viewed as a
single, perturbed black hole. We employ gauge-invariant perturbation theory,
and integrate the Zerilli equation to analyze these time-asymmetric data sets
and compute gravitational wave forms and emitted energies. When coupled with a
simple Newtonian analysis of the infall trajectory, we find striking agreement
between the perturbation calculation of emitted energies and the results of
fully general relativistic numerical simulations of time-symmetric initial
data.Comment: 5 pages (RevTex 3.0 with 3 uuencoded figures), CRSR-107
Anisotropic dehydration of hydrogel surfaces
Efforts to develop tissue-engineered skin for regenerative medicine have explored natural, synthetic, and hybrid hydrogels. The creation of a bilayer material, with the stratification exhibited by native skin is a complex problem. The mechanically robust, waterproof epidermis presents the stratum corneum at the tissue/air interface, which confers many of these protective properties. In this work we explore the effect of high temperatures on alginate hydrogels, which are widely employed for tissue engineering due to their excellent mechanical properties and cellular compatibility. In particular, we investigate the rapid dehydration of the hydrogel surface which occurs following local exposure to heated surfaces with temperatures in the range 100-200 oC. We report the creation of a mechanically strengthened hydrogel surface, with improved puncture resistance and increased coefficient of friction, compared to the unheated surface. The use of a mechanical restraint during heating promoted differences in the rate of mass loss; the rate of temperature increase within the hydrogel, in the presence and absence of restraint, is simulated and discussed. It is hoped that the results will be of use in the development of processes suitable for preparing skin-like analogues; application areas could include wound healing and skin restoration
Direct observation of a highly spin-polarized organic spinterface at room temperature
The design of large-scale electronic circuits that are entirely
spintronics-driven requires a current source that is highly spin-polarised at
and beyond room temperature, cheap to build, efficient at the nanoscale and
straightforward to integrate with semiconductors. Yet despite research within
several subfields spanning nearly two decades, this key building block is still
lacking. We experimentally and theoretically show how the interface between Co
and phthalocyanine molecules constitutes a promising candidate. Spin-polarised
direct and inverse photoemission experiments reveal a high degree of spin
polarisation at room temperature at this interface. We measured a magnetic
moment on the molecules's nitrogen pi orbitals, which substantiates an
ab-initio theoretical description of highly spin-polarised charge conduction
across the interface due to differing spinterface formation mechanims in each
spin channel. We propose, through this example, a recipe to engineer simple
organic-inorganic interfaces with remarkable spintronic properties that can
endure well above room temperature
The Dust Content of Galaxy Clusters
We report on the detection of reddening toward z ~ 0.2 galaxy clusters. This
is measured by correlating the Sloan Digital Sky Survey cluster and quasar
catalogs and by comparing the photometric and spectroscopic properties of
quasars behind the clusters to those in the field. We find mean E(B-V) values
of a few times 10^-3 mag for sight lines passing ~Mpc from the clusters'
center. The reddening curve is typical of dust but cannot be used to
distinguish between different dust types. The radial dependence of the
extinction is shallow near the cluster center suggesting that most of the
detected dust lies at the outskirts of the clusters. Gravitational
magnification of background z ~ 1.7 sources seen on Mpc (projected) scales
around the clusters is found to be of order a few per cent, in qualitative
agreement with theoretical predictions. Contamination by different spectral
properties of the lensed quasar population is unlikely but cannot be excluded.Comment: 4 pages, 3 figure
- …