DDT Granules - A New Way to Kill Corn Borers

The European corn borer actually is a misnamed insect. At least two-thirds of the worm stage of its life is spent feeding on the surface of leaves and leaf sheaths. Only during the latter part of its life does it tunnel into the stalk and become a borer

Developing automated methods to estimate spectrally resolved direct normal irradiance for solar energy applications

We describe four schemes designed to estimate spectrally resolved direct normal irradiance (DNI) for multi-junction concentrator photovoltaic systems applications. The schemes have increasing levels of complexity in terms of aerosol and circumsolar irradiance (CSI) treatment, ranging from a climatological aerosol classification with no account of CSI, to an approach which includes explicit aerosol typing and type dependent CSI contribution. When tested against ground-based broadband and spectral measurements at five sites spanning a range of aerosol conditions, the most sophisticated scheme yields an average bias of þ 0:068%, well within photometer calibration uncertainties. The average spread of error is 2:5%. These statistics are markedly better than the climatological approach, which carries an average bias of 1:76% and a spread of 4%. They also improve on an intermediate approach which uses Angstrom€ exponents to estimate the spectral variation in aerosol optical depth across the solar energy relevant wavelength domain. This approach results in systematic under and over-estimations of DNI at short and long wavelengths respectively. Incorporating spectral CSI particularly benefits sites which experience a significant amount of coarse aerosol. All approaches we describe use freely available reanalyses and software tools, and can be easily applied to alternative aerosol measurements, including those from satellite

Cytometric analysis, genetic manipulation and antibiotic selection of the snail embryonic cell line Bge from Biomphalaria glabrata, the intermediate host of Schistosoma mansoni.

The invertebrate cell line, Bge, from embryos of the snail Biomphalaria glabrata, remains to date the only established cell line from any species of the Phylum Mollusca. Since its establishment in 1976 by Eder Hansen, few studies have focused on profiling its cytometrics, growth characteristics or sensitivity to xenobiotics. Bge cells are reputed to be challenging to propagate and maintain. Therefore, even though this cell line is a noteworthy resource, it has not been studied widely. With growing interest in functional genomics, including genetic transformation, to elucidate molecular aspects of the snail intermediate hosts responsible for transmission of schistosomiasis, and aiming to enhance the convenience of maintenance of this molluscan cell line, we deployed the xCELLigene real time approach to study Bge cells. Doubling times for three isolates of Bge, termed CB, SL and UK, were longer than for mammalian cell lines - longer than 40 h in complete Bge medium supplemented with 7% fetal bovine serum at 25 °C, ranging from ∼42 h to ∼157 h when 40,000 cells were seeded. To assess the potential of the cells for genetic transformation, antibiotic selection was explored. Bge cells were sensitive to the aminonucleoside antibiotic puromycin (from Streptomyces alboniger) from 5 μg/ml to 200 ng/ml, displaying a half maximal inhibitory concentration (IC50) of ∼1.91 μg/ml. Sensitivity to puromycin, and a relatively quick kill time (<48 h in 5 μg/ml) facilitated use of this antibiotic, together with the cognate resistance gene (puromycin N-acetyl-transferase) for selection of Bge cells transformed with the PAC gene (puroR). Bge cells transfected with a plasmid encoding puroR were partially rescued when cultured in the presence of 5 μg/ml of puromycin. These findings pave the way for the development of functional genomic tools applied to the host-parasite interaction during schistosomiasis and neglected tropical trematodiases at large

The Sinbad retrotransposon from the genome of the human blood fluke, Schistosoma mansoni, and the distribution of related Pao-like elements

BACKGROUND: Of the major families of long terminal repeat (LTR) retrotransposons, the Pao/BEL family is probably the least well studied. It is becoming apparent that numerous LTR retrotransposons and other mobile genetic elements have colonized the genome of the human blood fluke, Schistosoma mansoni. RESULTS: A proviral form of Sinbad, a new LTR retrotransposon, was identified in the genome of S. mansoni. Phylogenetic analysis indicated that Sinbad belongs to one of five discreet subfamilies of Pao/BEL like elements. BLAST searches of whole genomes and EST databases indicated that members of this clade occurred in species of the Insecta, Nematoda, Echinodermata and Chordata, as well as Platyhelminthes, but were absent from all plants, fungi and lower eukaryotes examined. Among the deuterostomes examined, only aquatic species harbored these types of elements. All four species of nematode examined were positive for Sinbad sequences, although among insect and vertebrate genomes, some were positive and some negative. The full length, consensus Sinbad retrotransposon was 6,287 bp long and was flanked at its 5'- and 3'-ends by identical LTRs of 386 bp. Sinbad displayed a triple Cys-His RNA binding motif characteristic of Gag of Pao/BEL-like elements, followed by the enzymatic domains of protease, reverse transcriptase (RT), RNAseH, and integrase, in that order. A phylogenetic tree of deduced RT sequences from 26 elements revealed that Sinbad was most closely related to an unnamed element from the zebrafish Danio rerio and to Saci-1, also from S. mansoni. It was also closely related to Pao from Bombyx mori and to Ninja of Drosophila simulans. Sinbad was only distantly related to the other schistosome LTR retrotransposons Boudicca, Gulliver, Saci-2, Saci-3, and Fugitive, which are gypsy-like. Southern hybridization and bioinformatics analyses indicated that there were about 50 copies of Sinbad in the S. mansoni genome. The presence of ESTs representing transcripts of Sinbad in numerous developmental stages of S. mansoni along with the identical 5'- and 3'-LTR sequences suggests that Sinbad is an active retrotransposon. CONCLUSION: Sinbad is a Pao/BEL type retrotransposon from the genome of S. mansoni. The Pao/BEL group appears to be comprised of at least five discrete subfamilies, which tend to cluster with host species phylogeny. Pao/BEL type elements appear to have colonized only the genomes of the Animalia. The distribution of these elements in the Ecdysozoa, Deuterostomia, and Lophotrochozoa is discontinuous, suggesting horizontal transmission and/or efficient elimination of Pao-like mobile genetic elements from some genomes

Insights into the diurnal cycle of global Earth outgoing radiation using a numerical weather prediction model

A globally complete, high temporal resolution and multiple-variable approach is employed to analyse the diurnal cycle of Earth’s outgoing energy flows. This is made possible via the use of Met Office model output for September 2010 that is assessed alongside regional satellite observations throughout. Principal component analysis applied to the longwave component of modelled outgoing radiation reveals dominant diurnal patterns related to land surface heating and convective cloud development, respectively explaining 68.5 and 16.0% of the variance at the global scale. The total variance explained by these first two patterns is markedly less than previous regional estimates from observations, and this analysis suggests that around half of the difference relates to the lack of global coverage in the observations. The first pattern is strongly and simultaneously coupled to the land surface temperature diurnal variations. The second pattern is strongly coupled to the cloud water content and height diurnal variations, but lags the cloud variations by several hours. We suggest that the mechanism con- trolling the delay is a moistening of the upper troposphere due to the evaporation of anvil cloud. The shortwave component of modelled outgoing radiation, analysed in terms of albedo, exhibits a very dominant pattern explaining 88.4 % of the variance that is related to the angle of incoming solar radiation, and a second pattern explaining 6.7 % of the variance that is related to compensating effects from convective cloud development and marine stratocumulus cloud dissipation. Similar patterns are found in regional satellite observations, but with slightly different timings due to known model biases. The first pattern is controlled by changes in surface and cloud albedo, and Rayleigh and aerosol scattering. The second pattern is strongly coupled to the diurnal variations in both cloud water content and height in convective regions but only cloud water content in marine stratocumulus regions, with substantially shorter lag times compared with the longwave counterpart. This indicates that the shortwave radiation response to diurnal cloud development and dissipation is more rapid, which is found to be robust in the regional satellite observations. These global, diurnal radiation patterns and their coupling with other geophysical variables demonstrate the process-level understanding that can be gained using this approach and highlight a need for global, diurnal observing systems for Earth outgoing radiation in the future

The sensitivity of the colour of dust in MSG-SEVIRI Desert Dust infrared composite imagery to surface and atmospheric conditions

Infrared "Desert Dust" composite imagery taken by the Spinning Enhanced Visible and InfraRed Imager (SEVIRI), onboard the Meteosat Second Generation (MSG) series of satellites above the equatorial East Atlantic, has been widely used for more than a decade to identify and track the presence of dust storms from and over the Sahara Desert, the Middle East, and southern Africa. Dust is characterised by distinctive pink colours in the Desert Dust false-colour imagery; however, the precise colour is influenced by numerous environmental properties, such as the surface thermal emissivity and skin temperature, the atmospheric water vapour content, the quantity and height of dust in the atmosphere, and the infrared optical properties of the dust itself. For this paper, simulations of SEVIRI infrared measurements and imagery have been performed using a modelling system, which combines dust concentrations simulated by the aerosol transport model COSMO-MUSCAT (COSMO: COnsortium for Small-scale MOdelling; MUSCAT: MUltiScale Chemistry Aerosol Transport Model) with radiative transfer simulations from the RTTOV (Radiative Transfer for TOVS) model. Investigating the sensitivity of the synthetic infrared imagery to the environmental properties over a 6-month summertime period from 2011 to 2013, it is confirmed that water vapour is a major control on the apparent colour of dust, obscuring its presence when the moisture content is high. Of the three SEVIRI channels used in the imagery (8.7, 10.8, and 12.0 μm), the channel at 10.8 μm has the highest atmospheric transmittance and is therefore the most sensitive to the surface skin temperature. A direct consequence of this sensitivity is that the background desert surface exhibits a strong diurnal cycle in colour, with light blue colours possible during the day and purple hues prevalent at night. In dusty scenes, the clearest pink colours arise from high-altitude dust in dry atmospheres. Elevated dust influences the dust colour primarily by reducing the contrast in atmospheric transmittance above the dust layer between the SEVIRI channels at 10.8 and 12.0 μm, thereby boosting red and pink colours in the imagery. Hence, the higher the dust altitude, the higher the threshold column moisture needed for dust to be obscured in the imagery: for a sample of dust simulated to have an aerosol optical depth (AOD) at 550 nm of 2-3 at an altitude of 3-4 km, the characteristic colour of the dust may only be impaired when the total column water vapour is particularly moist ('39 mm). Meanwhile, dust close to the surface (altitude < 1 km) is only likely to be apparent when the atmosphere is particularly dry and when the surface is particularly hot, requiring column moisture/13 mm and skin temperatures '314 K, and is highly unlikely to be apparent when the skin temperature is/300 K. Such low-altitude dust will regularly be almost invisible within the imagery, since it will usually be beneath much of the atmospheric water vapour column. It is clear that the interpretation of satellite-derived dust imagery is greatly aided by knowledge of the background environment

An evaluation of two decades of aerosol optical depth retrievals from MODIS over Australia

We present an evaluation of Aerosol Optical Depth (AOD) retrievals from the Moderate Resolution Imaging Spectroradiometer (MODIS) over Australia covering the period 2001–2020. We focus on retrievals from the Deep Blue (DB) and Multi-Angle Implementation of Atmospheric Correction (MAIAC) algorithms, showing how these compare to one another in time and space. We further employ speciated AOD estimates from Copernicus Atmospheric Monitoring Service (CAMS) reanalyses to help diagnose aerosol types and hence sources. Considering Australia as a whole, monthly mean AODs show similar temporal behaviour, with a well-defined seasonal peak in the Austral summer. However, excepting periods of intense biomass burning activity, MAIAC values are systematically higher than their DB counterparts by, on average, 50%. Decomposing into seasonal maps, the patterns of behaviour show distinct differences, with DB showing a larger dynamic range in AOD, with markedly higher AODs (ΔAOD∼0.1) in northern and southeastern regions during Austral winter and summer. This is counter-balanced by typically smaller DB values across the Australian interior. Site level comparisons with all available level 2 AOD data from Australian Aerosol Robotic Network (AERONET) sites operational during the study period show that MAIAC tends to marginally outperform DB in terms of correlation (RMAIAC = 0.71, RDB = 0.65) and root-mean-square error (RMSEMAIAC = 0.065, RMSEDB = 0.072). To probe this behaviour further, we classify the sites according to the predominant surface type within a 25 km radius. This analysis shows that MAIAC’s advantage is retained across all surface types for R and all but one for RMSE. For this surface type (Bare, comprising just 1.2% of Australia) the performance of both algorithms is relatively poor, (RMAIAC = 0.403, RDB = 0.332)

Solar cooking in the sahel

Solar cookers are a cheap, practical tool for sustainable development, which can be built and maintained without access to expensive tools or machinery. Solar cookers require direct sunshine for effective cooking, so clouds or heavy atmospheric dust loads can slow down or prevent their use. Surface meteorological (SYNOP) stations record the daily hours of direct sunshine and were used to generate climatology of days with greater than 6 h available for cooking. The SYNOP dataset is very sparse in many parts of Africa and therefore is complemented by the use of geostationary satellite data. Higher temporal resolution surface insolation records are derived from SEVIRI (Spinning Enhanced Visible and Infrared Imager) on board the Meteosat Second Generation satellite series by EUMETSAT's Land Satellite Application Facility, but the approach uses fixed aerosol climatology. Direct surface solar irradiance was derived using the Beer-Lambert law using AODs retrieved from SEVIRI. Validation indicates that its capabilities are strongest over drier and less vegetated surfaces such as those found in the Sahara and Sahel. Biomass-burning aerosol may be significant over the Sahel in winter, and SEVIRI AODs may miss this unless it is masked as cloud, although here SYNOP values are still greater than those from SEVIRI

Public Beach Assessment Report Central Beach and Castlewood Park Beach Colonial Beach, Virginia

The purpose of this report is to document the recent history of Colonial Beach’s Potomac River shoreline as well as assess the historical shoreline evolution and status of the beach zone. Review of previously-published literature, field survey data, aerial photos, and computer modeling were used to address the study objectives