Distribution and Efficiency of Hydrocarbon-Oxidizing Bacteria in a Freshwater Reservoir

Hydrocarbon-oxidizing bacteria were identified from three stations on DeGray Reservoir, Arkansas. The organisms were primarily gram-negative rods representing 9 taxa and 37 biotypes Pseudomonas spp. were the most common isolates. The largest populations were found in areas most frequently used by boaters, although seasonal fluctuations were apparent during the spring and fall. The degradation of outboard motor oil by the five most rapidly growing isolates was studied. Each species had a different decomposition profile, and substrate oxidation rates were variable Acinetobacter calcoaceticus var. anitratus was the most efficient decomposer

Bleaching of the post-IR IRSL signal from individual grains of K-feldspar::implications for single-grain dating

Post-IR IRSL (pIRIR) signals from K-feldspar grains measured at elevated temperatures are increasingly being used for dating sediments. Unfortunately the pIRIR signal from K-feldspars bleaches more slowly than other signals (e.g. OSL from quartz) upon exposure to daylight, leading to concerns about residual signals remaining at deposition. However, earlier studies have not assessed whether the pIRIR signal bleaches at the same rate in all feldspar grains. In this study laboratory bleaching experiments have been conducted and for the first time the results show that the rate at which the pIRIR signal from individual K-feldspar grains bleach varies. To determine whether grain-to-grain variability in bleaching rate has a dominant control on equivalent dose (De) distributions determined using single grains, analysis was undertaken on three samples with independent age control from different depositional environments (two aeolian and one glaciofluvial). The De value determined from each grain was compared with the rate at which the pIRIR225 signal from the grain bleaches. The bleaching rate of each grain was assessed by giving a 52 Gy dose and measuring the residual De after bleaching for an hour in a solar simulator. There is no clear relationship between the rate at which the pIRIR225 signal of an individual grain bleaches and the magnitude of its De. It is concluded that variability in the bleaching rate of the pIRIR225 signal from one grain to another does not appear to be a dominant control on single grain De distributions

Sustainable farming with native rocks: the transition without revolution.

The development process which humanity passed through favored a series of conquests, reflected in the better quality of life and longevity, however, it also provoked upsets and severe transformation in the environment and in the human food security. Such process is driving the ecosystems to be homogeneous, and, therefore,the nutrients� supply, via nourishment. To change this panorama, the present work discusses the gains of incorporating the stonemeal technique as a strategic alternative to give back the essential fertile characteristics to the soils. This technology has the function of facilitating the rejuvenation of the soils and increasing the availability of the necessary nutrients to the full development of the plants which is a basic input for the proliferation of life in all its dimensions

The Physicist's Guide to the Orchestra

An experimental study of strings, woodwinds (organ pipe, flute, clarinet, saxophone and recorder), and the voice was undertaken to illustrate the basic principles of sound production in music instruments. The setup used is simple and consists of common laboratory equipment. Although the canonical examples (standing wave on a string, in an open and closed pipe) are easily reproduced, they fail to explain the majority of the measurements. The reasons for these deviations are outlined and discussed.Comment: 11 pages, 10 figures (jpg files). Submitted to European Journal of Physic

Determining intended evidence relations in natural language arguments

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/72555/1/j.1467-8640.1991.tb00386.x.pd

XPS and UHV AFM Analysis of the K2CsSb Photocathodes Growth

Next generation light sources, based on Energy Recovery Linac and Free Electron Laser technology will rely on photoinjector based electron sources. Successful operation of such sources requires reliable photocathodes with long operational life, uniform and high quantum efficiency, low thermal emittance and low dark current. The goal of this project is to construct a cathode which meets these requirements. Advances in photocathode research must take a combined effort. The materials have to be analyzed by means of chemical composition, surface structure and these findings have to be correlated to the quantum efficiency and performance in the injector. The presented work focuses on the chemical composition and surface structure of K2CsSb photocathodes. The XPS and AFM measurements were performed at the Center of Functional Nanomaterials at BNL. K2CsSb photocathodes were grown under UHV conditions. The components were adsorbed one at a time and after each growth step the corresponding XPS spectra was taken. During growth the quantum efficiency was recorded. As last step the sample was moved into the AFM without exposure to air to determine the surface roughnes

Improving prenatal diagnosis through standards and aggregation.

Advances in sequencing and imaging technologies enable enhanced assessment in the prenatal space, with a goal to diagnose and predict the natural history of disease, to direct targeted therapies, and to implement clinical management, including transfer of care, election of supportive care, and selection of surgical interventions. The current lack of standardization and aggregation stymies variant interpretation and gene discovery, which hinders the provision of prenatal precision medicine, leaving clinicians and patients without an accurate diagnosis. With large amounts of data generated, it is imperative to establish standards for data collection, processing, and aggregation. Aggregated and homogeneously processed genetic and phenotypic data permits dissection of the genomic architecture of prenatal presentations of disease and provides a dataset on which data analysis algorithms can be tuned to the prenatal space. Here we discuss the importance of generating aggregate data sets and how the prenatal space is driving the development of interoperable standards and phenotype-driven tools

Variability in the chemistry of private drinking water supplies and the impact of domestic treatment systems on water quality.

Tap water from 497 properties using private water supplies, in an area of metalliferous and arsenic mineralisation (Cornwall, UK), was measured to assess the extent of compliance with chemical drinking water quality standards, and how this is influenced by householder water treatment decisions. The proportion of analyses exceeding water quality standards were high, with 65 % of tap water samples exceeding one or more chemical standards. The highest exceedances for health-based standards were nitrate (11 %) and arsenic (5 %). Arsenic had a maximum observed concentration of 440 µg/L. Exceedances were also high for pH (47 %), manganese (12 %) and aluminium (7 %), for which standards are set primarily on aesthetic grounds. However, the highest observed concentrations of manganese and aluminium also exceeded relevant health-based guidelines. Significant reductions in concentrations of aluminium, cadmium, copper, lead and/or nickel were found in tap waters where households were successfully treating low-pH groundwaters, and similar adventitious results were found for arsenic and nickel where treatment was installed for iron and/or manganese removal, and successful treatment specifically to decrease tap water arsenic concentrations was observed at two properties where it was installed. However, 31 % of samples where pH treatment was reported had pH < 6.5 (the minimum value in the drinking water regulations), suggesting widespread problems with system maintenance. Other examples of ineffectual treatment are seen in failed responses post-treatment, including for nitrate. This demonstrates that even where the tap waters are considered to be treated, they may still fail one or more drinking water quality standards. We find that the degree of drinking water standard exceedances warrant further work to understand environmental controls and the location of high concentrations. We also found that residents were more willing to accept drinking water with high metal (iron and manganese) concentrations than international guidelines assume. These findings point to the need for regulators to reinforce the guidance on drinking water quality standards to private water supply users, and the benefits to long-term health of complying with these, even in areas where treated mains water is widely available