Hepatitis e Virus Genotype 3 Genomes from RNA-Positive but Serologically Negative Plasma Donors Have CUG as the Start Codon for ORF3

Hepatitis E virus (HEV) is a pathogen that causes hepatitis worldwide. Molecular studies have identified HEV RNA in blood products although its significance is not understood. This study was undertaken to characterize HEV genomes in asymptomatic plasma donors from Sweden and Germany lacking anti-HEV. Complete open reading frames (ORFs) were obtained from HEV strains in 5 out of 18 plasma donors who tested positive for HEV RNA. All strains had CUG as the start codon of ORF3, while 147 GenBank strains all had AUG as the start codon (p < 0.0001). This substitution was found in both interrelated and unrelated strains belonging to different phylogenetic clades. The HEV strains from the seronegative plasma donors had no other substitution in common, which may be why the CUG substitution seems to explain the seronegativity

Stress factors and stress management interventions: the heuristic of “bottom up” an update from a systematic review

Organizations have increasingly sought to adopt innovative interventions to prevent stress-related issues. In the field of manufacturing, however, the effectiveness of these interventions remains unclear because a systematic and specific review of existing primary evidence has not been undertaken. The present systematic literature review sought to address the foregoing limitation in the literature by summarizing the main source of stress and effectiveness of stress management interventions as grounded in the context of manufacturing. Our review was limited to only randomized clinical trials (RCTs) and quasi-experimental studies and concerned employees from the manufacturing sector. Twenty-two studies on primary, secondary and tertiary interventions across four continents (Asia, Europe, USA and South America) were selected and analyzed in terms of stress factors, methodological properties and outcomes. Most of these were RCT studies (68% Vs 32%) with a majority of secondary interventions (N = 11, 50%), followed by primary (N = 5, 22%), tertiary (N = 3, 13%), and two (9%) mixed interventions. The main outcomes included an improvement of psychological wellbeing, decreased stress reactivity and an increment of general health. There was a predominance of interventions utilizing skills programs and/or cognitive-behavioral techniques. The main source of stress reported related to professional identity, organizational deficiencies, interpersonal conflicts, physical complaints and poor work environment. Taken together, the findings provide important theoretical and practical implications for advancing the study of stress factors and the use of stress management interventions in the workplace. The prerequisite for a successful intervention is to address the real problems experienced by professionals and help them to cope with their difficult situations. The strategy of “bottom-up” offers a potential means of enhancing employees’ health and well-being; however, the most effective means of implementing these interventions needs to be understood better

Genotipagem do vírus da hepatite B de pacientes crônicos com resistência ao tratamento com lamivudina na Cidade de Ribeirão Preto, Estado de São Paulo

INTRODUCTION: Lamivudine is a nucleoside analogue that is used clinically for treating chronic hepatitis B infection. However, the main problem with prolonged use of lamivudine is the development of viral resistance to the treatment. Mutations in the YMDD motif of the hepatitis B virus DNA polymerase gene have been associated with resistance to drug therapy. So far, there have not been many studies in Brazil reporting on genotype-dependent development of resistance to lamivudine. Thus, the aim of the present study was to determine the possible correlation between a certain genotype and increased development of resistance to lamivudine among chronic hepatitis B patients. METHODS: HBV DNA in samples from 50 patients under lamivudine treatment was amplified by means of conventional PCR. Samples were collected at Hospital das Clínicas, FMRP-USP. The products were then sequenced and phylogenetic analysis was performed. RESULTS: Phylogenetic analysis revealed that 29 (58%) patients were infected with genotype D, 20 (40%) with genotype A and one (2%) with genotype F. Mutations in the YMDD motif occurred in 20% of the patients with genotype A and 27.6% of the patients with genotype D. CONCLUSIONS: Despite the small number of samples, our results indicated that mutations in the YMDD motif were 1.38 times more frequent in genotype D than in genotype A.INTRODUÇÃO: Lamivudina é um análogo de nucleosídeo clinicamente utilizado para o tratamento da infecção crônica pela hepatite B. Entretanto, o principal problema do uso prolongado da lamivudina é o desenvolvimento de resistência viral ao tratamento. Mutações no motivo YMDD no gene da DNA polimerase do vírus da hepatite B estão associados com a resistência a terapia medicamentosa. Até o presente momento, não há muitos estudos no Brasil que descrevem o desenvolvimento genótipo-dependente da resistência à lamivudina. Assim, o intuito do trabalho aqui descrito foi determinar a possível correlação entre um determinado genótipo e o desenvolvimento aumentado da resistência à lamivudina em pacientes com hepatite B crônica. MÉTODOS: O HBV DNA foi amplificado por PCR convencional a partir de 50 amostras coletadas de pacientes submetidos ao tratamento com lamivudina no Hospital das Clínicas- FMRP- USP. Posteriormente, os produtos foram seqüenciados e a análise filogenética foi realizada. RESULTADOS: A análise filogenética mostrou que 29 (58%) pacientes foram infectados com o genótipo D, 20 (40%) com o genótipo A e 1 (2%) com o genótipo F. Mutações no motivo YMDD ocorreu em 20% dos pacientes com genótipo A e 27,6% em pacientes do genótipo D. CONCLUSÕES: Apesar do baixo número de amostras, nossos resultados indicaram que mutações no motivo YMDD são 1,38 X mais frequentes no genótipo D em relação ao genótipo A.Universidade de São Paulo USP - FCFR

Pentagonal Photonic Crystal Mirrors: Scalable Lightsails with Enhanced Acceleration via Neural Topology Optimization

The Starshot Breakthrough Initiative aims to send one-gram microchip probes to Alpha Centauri within 20 years, using gram-scale lightsails propelled by laser-based radiation pressure, reaching velocities nearing a fifth of light speed. This mission requires lightsail materials that challenge the fundamentals of nanotechnology, requiring innovations in optics, material science and structural engineering. Unlike the microchip payload, which must be minimized in every dimension, such lightsails need meter-scale dimensions with nanoscale thickness and billions of nanoscale holes to enhance reflectivity and reduce mass. Our study employs neural topology optimization, revealing a novel pentagonal lattice-based photonic crystal (PhC) reflector. The optimized designs shorten acceleration times, therefore lowering launch costs significantly. Crucially, these designs also enable lightsail material fabrication with orders-of-magnitude reduction in costs. We have fabricated a 60 x 60 mm$^2$, 200nm thick, single-layer reflector perforated with over a billion nanoscale features; the highest aspect-ratio nanophotonic element to date. We achieve this with nearly 9,000 times cost reduction per m$^2$. Starshot lightsails will have several stringent requirements but will ultimately be driven by costs to build at scale. Here we highlight challenges and possible solutions in developing lightsail materials - showcasing the potential of scaling nanophotonics for cost-effective next-generation space exploration

Molecular and Phylogenetic Analyses Suggest an Additional Hepatitis B Virus Genotype “I”

A novel hepatitis B virus (HBV) strain (W29) was isolated from serum samples in the northwest of China. Phylogenetic and distance analyses indicate that this strain is grouped with a series of distinct strains discovered in Vietnam and Laos that have been proposed to be a new genotype I. TreeOrderScan and GroupScan methods were used to study the intergenotype recombination of this special group. Recombination plots and tree maps of W29 and these putative genotype I strains exhibit distinct characteristics that are unexpected in typical genotype C strains of HBV. The amino acids of P gene, S gene, X gene, and C gene of all genotypes (including subtypes) were compared, and eight unique sites were found in genotype I. In vitro and in vivo experiments were also conducted to determine phenotypic characteristics between W29 and other representative strains of different genotypes obtained from China. Secretion of HBsAg in Huh7 cells is uniformly abundant among genotypes A, B, C, and I (W29), but not genotype D. HBeAg secretion is low in genotype I (W29), whose level is close to genotype A and much lower than genotypes B, C, and D. Results from the acute hydrodynamic injection mouse model also exhibit a similar pattern. From an overview of the results, the viral markers of W29 (I1) in Huh7 cells and mice had a more similar level to genotype A than genotype C, although the latter was closer to W29 in distance analysis. All evidence suggests that W29, together with other related strains found in Vietnam and Laos, should be classified into a new genotype

Hepatitis B virus: molecular genotypes and HBeAg serological status among HBV-infected patients in the southeast of Brazil

<p>Abstract</p> <p>Background</p> <p>Knowledge of HBV genotype is very important for clinical treatment. Studies have suggested possible pathogenic and therapeutic differences among HBV genotypes. The aim of this study was to determine HBV subtypes and genotypes in HBV-infected patients in our region (southeast Brazil) and to correlate results with clinical and histopathological data.</p> <p>Methods</p> <p>One hundred and thirty-nine HBsAg-positive patients were included in the study. All patients were anti-HCV and anti-HIV negative (64% male; mean age 42 ± 14.5 years; range 7-80 years; 84% Caucasian) and were followed up at the University Hospital. A method for genotyping and subtyping HBV by partial HBsAg gene sequencing with primers common to all known genotypes was used. The viral load was measured by Amplicor Monitor assay (Roche).</p> <p>Results</p> <p>HBV genotype A was the most prevalent (55%), while genotypes C, D and F were found in 3%, 38% and 4% of HBV-infected patients, respectively. Among the patients infected by genotype A, 18.3% (14/76) were African descendents and, among the patients infected by genotype D, 11.3% (6/53) were also African descendents. In the four patients infected with genotype C, 2 were Asian descendents and 2 were Caucasians. All (7) genotype F infected patients were Caucasians. Seventy percent of our HBsAg-positive patients were HBeAg negative (62% genotypes A; 26.2% D; 7.1% C and 4.7%F). The viral load of HBV-DNA was about 5 times higher in HBeAg-positive than in HBeAg-negative patients. About 40% of these patients had alanine aminotransferase of up to 1.5 times the normal level. The mean stage of fibrosis in genotype A patients (2.8) was significantly higher than the mean stage of fibrosis in genotype D patients (2.0) (P = 0.0179).</p> <p>Conclusion</p> <p>The genotypes encountered in our HBV-infected patients were apparently a consequence of the types of immigration that occurred in our region, where European and African descendents predominate. The HBeAg-negative status predominated, possibly due to the length of time of infection. The viral load in HBeAg-positive patients was higher than in HBeAg-negative individuals. The fibrosis grade in genotype A-infected patients was more advanced than genotype D-infected patients.</p

Large-scale extrusion processing and characterization of hybrid nylon-6/SiO2 nanocomposites

Solution impregnations, pulltrusion and film stacking are widely used methods to prepare thermoplastic composite materials. Extruders are used to melt the polymer and to incorporate fibers into the polymer in order to modify physical properties. In this article, the compounding of colloidal silica nanoparticles filled polyamide-6 (PA-6) is achieved using a twin-screw extruder, which has a significant market share due to its low cost and easy maintenance. The experiments were performed at 250 rpm and the bulk throughput was 6 kg h(-1) with a pump pressure of 30 bars. The composites were characterized with nuclear magnetic resonance (NMR), wide angle X-ray diffraction (WAXD), differential scanning calorimetry (DSC) and transmission electron microscopy (TEM). As determined by WAXD, the PA-6 showed higher amounts of gamma-phase when compared to other synthesis methods such as in situ polymerization. TEM pictures showed that the silica particles aggregated nevertheless, upon addition of 14% (w/w) silica the E-modulus increased from 2.7 to 3.9 GPa indicating that an effective mechanical coupling with the polymer was achieved. The behavior, illustrated with dynamic mechanical analysis (DMA) curves, indicated that in general when a filled system is compared to unfilled material, the values of the moduli (E' and E") increased and tan 6 decreased. Determination of molecular mass distribution of the samples by means of size exclusion chromatography (SEC) coupled to a refractive index (RI), viscosity (DV) and light scattering (LS) detector revealed that the addition of silica did not decrease the average molecular weight of the polymer matrix, which is of importance for composite applications. Copyright (C) 2004 John Wiley Sons, Ltd.</p

Glottospace: R package for language mapping and geospatial analysis of linguistic and cultural data

Horizon 2020(H2020)818854Descriptive and Comparative Linguistic