Características do leite de búfalas da raça Mediterrâneo e mestiças Murrah-Mediterrâneo.

bitstream/item/31893/1/CPATU-BP28.pd

Extensive Investigations on Radial Crack Formation in Labyrinth Seals of Aircraft Engines

Labyrinth seals are due to their non-contact function and their thermal resistance the state of the art in sealing technology for thermal turbomachinery such as jet engines. The purpose of labyrinth seals is to adjust or minimize the leakage between rotor and stator. However, because of transient flight manoeuvres and the resulting mechanical and thermal loads on the components, contact between rotating and stationary parts cannot be ruled out. The aim of this study is to extend the basic understanding of the mechanisms of hot crack formation in the components of a labyrinth seal during the rubbing process. Previous investigations at the Institute of Thermal Turbomachinery have shown that the thermally induced stress caused in connection with the thermal change of the material properties can lead to formation of the cracks in the seal fin. In order to get a deeper understanding of the complex crack initiation mechanisms, it is necessary to carry out fundamental experiments on simplified geometries. For this purpose, the stress conditions of a loaded labyrinth seal are applied to a cylindrical test specimen. It is fixed on both sides and subjected to thermo-cyclic load. To model a rubbing process of a labyrinth seal, the initial temperature of the cycle corresponds to the operating temperature of the rotor in a jet engine and the final temperature corresponds to the contact temperature during the rubbing process. The temperature change causes stress in the specimen due to the rigid mounting. In literature there are analytical considerations regarding the stress-strain curve in the seal fin and a possible pre-damage of the components by remaining tensile stress after the rubbing process. In this paper, these analytical approaches are compared with the test data. Also a residual tensile strength of the seal fin which is still to be tolerated is worked out depending on the temperature load. The stress reduction during heating is very significant and is considered in detail. Due to the high mechanical and thermal loads, the stress reduction is superimposed by relaxation and plastic deformation. For a separate consideration of these basic effects, FE simulations are carried out. The main findings are that stress and strain in the component depends on both the initial and the final temperature of the specimen. The final rubbing temperature mainly influences the remaining tensile stress. With the thus calculated remaining strength of the seal fin a probable crack formation could be determined. The evaluation of this data contributes significantly to the understanding of hot crack formation in labyrinth seal fins and is therefore the basis for the optimization of the sealing system with regard to robustness against rubbing processes

Extrato hidrossolúvel de soja (leite de soja) com sabores de frutas da Amazônia.

bitstream/item/60888/1/CPATU-Doc80.pd

Iogurte de leite de búfala com sabores de frutas da Amazônia.

bitstream/item/33778/1/CPATU-CirTec23.pd

Perioperative mortality and major cardio-pulmonary complications after lung surgery for non-small cell carcinoma

Objectives: A database of patients operated of lung cancer was analyzed to evaluate the predictive risk factors of operative deaths and life-threatening cardiopulmonary complications. Methods: From 1990 to 1997, data were collected concerning 634 consecutive patients undergoing lung resection for non-small cell carcinoma in an academic medical centre and a regional hospital. Operations were managed by a team of experienced surgeons, anaesthesiologists and chest physicians. Operative mortality was defined as death within 30 days of operation and/or intra-hospital death. Respiratory failure, myocardial infarct, heart failure, pulmonary embolism and stroke were considered as major non-fatal complications. Preoperative risk factors, extent of surgery, pTNM staging, perioperative mortality and major cardiopulmonary complications were recorded and evaluated using chi-square statistics and multivariate logistic regression. Results: Complete data were obtained in 621 cases. The overall operative mortality was 3.2% (n=19). Cardiovascular complications (n=10), haemorrhage (n=4) and sepsis or acute lung injury (n=5) were incriminated as the main causative factors. In addition, there were 13 life-threatening complications (2.1%) consisting in strokes (n=4), myocardial infarcts (n=5), pulmonary embolisms (n=1), acute lung injury (n=1) and respiratory failure (n=2). Four independent predictors of operative death were identified: pneumonectomy, evidence of coronary artery disease (CAD), ASA class 3 or 4 and period 1990-93. In addition, the risk of major complications was increased in hypertensive patients and in those belonging to ASA class 3 or 4. A trend towards improved outcome was observed during the second period, from 1994 to 97. Conclusion: Our data demonstrate that perioperative mortality is mainly dependent on the extent of surgery, the presence of CAD and provision of adequate medical and nursing care. Preoperative testing and interventions to reduce the cardiovascular risk factors may help to further improve perioperative outcom

Quantitative uptake of colloidal particles by cell cultures

The use of nanotechnologies involving nano- and microparticles has increased tremendously in the recent past. There are various beneficial characteristics that make particles attractive for a wide range of technologies. However, colloidal particles on the other hand can potentially be harmful for humans and environment. Today, complete understanding of the interaction of colloidal particles with biological systems still remains a challenge. Indeed, their uptake, effects, and final cell cycle including their life span fate and degradation in biological systems are not fully understood. This is mainly due to the complexity of multiple parameters which need to be taken in consideration to perform the nanosafety research. Therefore, we will provide an overview of the common denominators and ideas to achieve universal metrics to assess their safety. The review discusses aspects including how biological media could change the physicochemical properties of colloids, how colloids are endocytosed by cells, how to distinguish between internalized versus membrane-attached colloids, possible correlation of cellular uptake of colloids with their physicochemical properties, and how the colloidal stability of colloids may vary upon cell internalization. In conclusion three main statements are given. First, in typically exposure scenarios only part of the colloids associated with cells are internalized while a significant part remain outside cells attached to their membrane. For quantitative uptake studies false positive counts in the form of only adherent but not internalized colloids have to be avoided. pH sensitive fluorophores attached to the colloids, which can discriminate between acidic endosomal/lysosomal and neutral extracellular environment around colloids offer a possible solution. Second, the metrics selected for uptake studies is of utmost importance. Counting the internalized colloids by number or by volume may lead to significantly different results. Third, colloids may change their physicochemical properties along their life cycle, and appropriate characterization is required during the different stages.This work was supported by the European Commission (grant FutureNanoNeeds) grant agreement no. 604602 to WJP. NF acknowledges funding from the Lars Hiertas Minne Fundation (Sweden), SA, BP and IC acknowledge a fellowship from the Alexander von Humboldt Fundation (Germany). AE acknowledges Junta de Andalucía (Spain) for a Talentia Postdoc Fellowship, co-financed by the European Union Seventh Framework Programme, grant agreement no 267226. AHS acknowledges the Egyptian government (Ministry of Higher Education, Mission). The project was also supported by the Dr. Dorka-Stiftung (Germany) to PJ

Estudo comparativo da composição química do leite de zebuínos e bubalinos.

bitstream/item/31907/1/CPATU-BP36.pd

Plant cell culture technology in the cosmetics and food industries : current state and future trends

The production of drugs, cosmetics, and food which are derived from plant cell and tissue cultures has a long tradition. The emerging trend of manufacturing cosmetics and food products in a natural and sustainable manner has brought a new wave in plant cell culture technology over the past 10 years. More than 50 products based on extracts from plant cell cultures have made their way into the cosmetics industry during this time, whereby the majority is produced with plant cell suspension cultures. In addition, the first plant cell culture-based food supplement ingredients, such as Echigena Plus and Teoside 10, are now produced at production scale. In this mini review, we discuss the reasons for and the characteristics as well as the challenges of plant cell culture-based productions for the cosmetics and food industries. It focuses on the current state of the art in this field. In addition, two examples of the latest developments in plant cell culture-based food production are presented, that is, superfood which boosts health and food that can be produced in the lab or at home