Conformal Mapping on Rough Boundaries II: Applications to bi-harmonic problems

We use a conformal mapping method introduced in a companion paper to study the properties of bi-harmonic fields in the vicinity of rough boundaries. We focus our analysis on two different situations where such bi-harmonic problems are encountered: a Stokes flow near a rough wall and the stress distribution on the rough interface of a material in uni-axial tension. We perform a complete numerical solution of these two-dimensional problems for any univalued rough surfaces. We present results for sinusoidal and self-affine surface whose slope can locally reach 2.5. Beyond the numerical solution we present perturbative solutions of these problems. We show in particular that at first order in roughness amplitude, the surface stress of a material in uni-axial tension can be directly obtained from the Hilbert transform of the local slope. In case of self-affine surfaces, we show that the stress distribution presents, for large stresses, a power law tail whose exponent continuously depends on the roughness amplitude

Characterization of the first true coaxial 18-fold segmented n-type prototype detector for the GERDA project

The first true coaxial 18-fold segmented n-type HPGe prototype detector produced by Canberra-France for the GERDA neutrinoless double beta-decay project was tested both at Canberra-France and at the Max-Planck-Institut fuer Physik in Munich. The main characteristics of the detector are given and measurements concerning detector properties are described. A novel method to establish contacts between the crystal and a Kapton cable is presented.Comment: 21 pages, 16 Figures, to be submitted to NIM

Conformal Mapping on Rough Boundaries I: Applications to harmonic problems

The aim of this study is to analyze the properties of harmonic fields in the vicinity of rough boundaries where either a constant potential or a zero flux is imposed, while a constant field is prescribed at an infinite distance from this boundary. We introduce a conformal mapping technique that is tailored to this problem in two dimensions. An efficient algorithm is introduced to compute the conformal map for arbitrarily chosen boundaries. Harmonic fields can then simply be read from the conformal map. We discuss applications to "equivalent" smooth interfaces. We study the correlations between the topography and the field at the surface. Finally we apply the conformal map to the computation of inhomogeneous harmonic fields such as the derivation of Green function for localized flux on the surface of a rough boundary

Order reduction approaches for the algebraic Riccati equation and the LQR problem

We explore order reduction techniques for solving the algebraic Riccati equation (ARE), and investigating the numerical solution of the linear-quadratic regulator problem (LQR). A classical approach is to build a surrogate low dimensional model of the dynamical system, for instance by means of balanced truncation, and then solve the corresponding ARE. Alternatively, iterative methods can be used to directly solve the ARE and use its approximate solution to estimate quantities associated with the LQR. We propose a class of Petrov-Galerkin strategies that simultaneously reduce the dynamical system while approximately solving the ARE by projection. This methodology significantly generalizes a recently developed Galerkin method by using a pair of projection spaces, as it is often done in model order reduction of dynamical systems. Numerical experiments illustrate the advantages of the new class of methods over classical approaches when dealing with large matrices

A bootstrap method for sum-of-poles approximations

A bootstrap method is presented for finding efficient sum-of-poles approximations of causal functions. The method is based on a recursive application of the nonlinear least squares optimization scheme developed in (Alpert et al. in SIAM J. Numer. Anal. 37:1138–1164, 2000), followed by the balanced truncation method for model reduction in computational control theory as a final optimization step. The method is expected to be useful for a fairly large class of causal functions encountered in engineering and applied physics. The performance of the method and its application to computational physics are illustrated via several numerical examples

Анализ конкурентных стратегических альтернатив на основе построения сегментной карты

This study investigated whether subablative-pulsed CO(2) laser (10.6 mu m) irradiation, using fluences lower than 1 J/cm(2), was capable of reducing enamel acid solubility. Fifty-one samples of bovine dental enamel were divided into three groups: control group, which was not irradiated (CG); group laser A (LA) irradiated with 0.3 J/cm ; and group laser B (LB) irradiated with 0.7 J/cm(2). After irradiation, the samples were subjected to demineralization in an acetate buffer solution and were then analyzed by SEM. A finite-element model was used to calculate the temperature increase. The calcium and phosphorous content in the demineralization solution were measured with an ICP-OES. ANOVA and the t-test pairwise comparison (p < 0.016) revealed that LB showed significantly lower mean Ca and P content values in the demineralization solution than other groups. A reduction in the enamel solubility can be obtained with pulsed CO(2) laser irradiation (0.7 J/cm(2), 135 mJ/pulse, 74 Hz, 100 mu s) without any surface photomodification and a less than 2 degrees C temperature increase at a 3-mm depth from the surface

Order-of-magnitude speedup for steady states and traveling waves via Stokes preconditioning in Channelflow and Openpipeflow

Steady states and traveling waves play a fundamental role in understanding hydrodynamic problems. Even when unstable, these states provide the bifurcation-theoretic explanation for the origin of the observed states. In turbulent wall-bounded shear flows, these states have been hypothesized to be saddle points organizing the trajectories within a chaotic attractor. These states must be computed with Newton's method or one of its generalizations, since time-integration cannot converge to unstable equilibria. The bottleneck is the solution of linear systems involving the Jacobian of the Navier-Stokes or Boussinesq equations. Originally such computations were carried out by constructing and directly inverting the Jacobian, but this is unfeasible for the matrices arising from three-dimensional hydrodynamic configurations in large domains. A popular method is to seek states that are invariant under numerical time integration. Surprisingly, equilibria may also be found by seeking flows that are invariant under a single very large Backwards-Euler Forwards-Euler timestep. We show that this method, called Stokes preconditioning, is 10 to 50 times faster at computing steady states in plane Couette flow and traveling waves in pipe flow. Moreover, it can be carried out using Channelflow (by Gibson) and Openpipeflow (by Willis) without any changes to these popular spectral codes. We explain the convergence rate as a function of the integration period and Reynolds number by computing the full spectra of the operators corresponding to the Jacobians of both methods.Comment: in Computational Modelling of Bifurcations and Instabilities in Fluid Dynamics, ed. Alexander Gelfgat (Springer, 2018

The translation, validity and reliability of the German version of the Fremantle Back Awareness Questionnaire

Background: The Fremantle Back Awareness Questionnaire (FreBAQ) claims to assess disrupted self-perception of the back. The aim of this study was to develop a German version of the Fre-BAQ (FreBAQ-G) and assess its test-retest reliability, its known-groups validity and its convergent validity with another purported measure of back perception. Methods: The FreBaQ-G was translated following international guidelines for the transcultural adaptation of questionnaires. Thirty-five patients with non-specific CLBP and 48 healthy participants were recruited. Assessor one administered the FreBAQ-G to each patient with CLBP on two separate days to quantify intra-observer reliability. Assessor two administered the FreBaQ-G to each patient on day 1. The scores were compared to those obtained by assessor one on day 1 to assess inter-observer reliability. Known-groups validity was quantified by comparing the FreBAQ-G score between patients and healthy controls. To assess convergent validity, patient\u27s FreBAQ-G scores were correlated to their two-point discrimination (TPD) scores. Results: Intra- and Inter-observer reliability were both moderate with ICC3.1 = 0.88 (95%CI: 0.77 to 0.94) and 0.89 (95%CI: 0.79 to 0.94), respectively. Intra- and inter-observer limits of agreement (LoA) were 6.2 (95%CI: 5.0±8.1) and 6.0 (4.8±7.8), respectively. The adjusted mean difference between patients and controls was 5.4 (95%CI: 3.0 to 7.8, p\u3c0.01). Patient\u27s FreBAQ-G scores were not associated with TPD thresholds (Pearson\u27s r = -0.05, p = 0.79). Conclusions: The FreBAQ-G demonstrated a degree of reliability and known-groups validity. Interpretation of patient level data should be performed with caution because the LoA were substantial. It did not demonstrate convergent validity against TPD. Floor effects of some items of the FreBAQ-G may have influenced the validity and reliability results. The clinimetric properties of the FreBAQ-G require further investigation as a simple measure of disrupted self-perception of the back before firm recommendations on its use can be made