Drying dip-coated colloidal films

We present the results from a small-angle X-ray scattering (SAXS) study of lateral drying in thin films. The films, initially 10 μm thick, are cast by dip-coating a mica sheet in an aqueous silica dispersion (particle radius 8 nm, volume fraction ϕs = 0.14). During evaporation, a drying front sweeps across the film. An X-ray beam is focused on a selected spot of the film, and SAXS patterns are recorded at regular time intervals. As the film evaporates, SAXS spectra measure the ordering of particles, their volume fraction, the film thickness, and the water content, and a video camera images the solid regions of the film, recognized through their scattering of light. We find that the colloidal dispersion is first concentrated to ϕs = 0.3, where the silica particles begin to jam under the effect of their repulsive interactions. Then the particles aggregate until they form a cohesive wet solid at ϕs = 0.68 ± 0.02. Further evaporation from the wet solid leads to evacuation of water from pores of the film but leaves a residual water fraction ϕw = 0.16. The whole drying process is completed within 3 min. An important finding is that, in any spot (away from boundaries), the number of particles is conserved throughout this drying process, leading to the formation of a homogeneous deposit. This implies that no flow of particles occurs in our films during drying, a behavior distinct to that encountered in the iconic coffee-stain drying. It is argued that this type of evolution is associated with the formation of a transition region that propagates ahead of the drying front. In this region the gradient of osmotic pressure balances the drag force exerted on the particles by capillary flow toward the liquid–solid front

Multiple Scale Reorganization of Electrostatic Complexes of PolyStyrene Sulfonate and Lysozyme

We report on a SANS investigation into the potential for these structural reorganization of complexes composed of lysozyme and small PSS chains of opposite charge if the physicochemical conditions of the solutions are changed after their formation. Mixtures of solutions of lysozyme and PSS with high matter content and with an introduced charge ratio [-]/[+]intro close to the electrostatic stoichiometry, lead to suspensions that are macroscopically stable. They are composed at local scale of dense globular primary complexes of radius ~ 100 {\AA}; at a higher scale they are organized fractally with a dimension 2.1. We first show that the dilution of the solution of complexes, all other physicochemical parameters remaining constant, induces a macroscopic destabilization of the solutions but does not modify the structure of the complexes at submicronic scales. This suggests that the colloidal stability of the complexes can be explained by the interlocking of the fractal aggregates in a network at high concentration: dilution does not break the local aggregate structure but it does destroy the network. We show, secondly, that the addition of salt does not change the almost frozen inner structure of the cores of the primary complexes, although it does encourage growth of the complexes; these coalesce into larger complexes as salt has partially screened the electrostatic repulsions between two primary complexes. These larger primary complexes remain aggregated with a fractal dimension of 2.1. Thirdly, we show that the addition of PSS chains up to [-]/[+]intro ~ 20, after the formation of the primary complex with a [-]/[+]intro close to 1, only slightly changes the inner structure of the primary complexes. Moreover, in contrast to the synthesis achieved in the one-step mixing procedure where the proteins are unfolded for a range of [-]/[+]intro, the native conformation of the proteins is preserved inside the frozen core

Microfluidic in-line dynamic light scattering with a commercial fibre optic system.

We report the coupling of dynamic light scattering (DLS) in microfluidics, using a contact-free fibre-optic system, enabling the under-flow characterisation of a range of solutions, dispersions, and structured fluids. The system is evaluated and validated with model systems, specifically micellar and (dilute) polymer solutions, and colloidal dispersions of different radii (∼1-100 nm). A systematic method of flow-DLS analysis is examined as a function of flow velocity (0-16 cm s-1), and considerations of the relative contribution of 'transit' and 'Brownian' terms enable the identification of regions where (i) a quiescent approximation suffices, (ii) the flow-DLS framework holds, as well as (iii) where deviations are found, until eventually (iv) the convection dominates. We investigate practically relevant, robust setups, namely that of a capillary connected to microdevice, as well as direct measurement on a glass microdevice, examining the role of capillary dimensions and challenges of optical alignment. We conclude with a demonstration of a continuous flow measurement of a binary surfactant/salt solution, whose micellar dimensions vary with composition, characterised with hundreds of data points (every ∼5 s) and adequate statistics, within a few minutes

Microfluidic SAXS study of lamellar and multilamellar vesicle phases of linear sodium alkylbenzenesulfonate surfactant with intrinsic isomeric distribution

The structure and flow behaviour of a concentrated aqueous solution (45 w.t. %) of the ubiquitous linear sodium alkylbenzene sulfonate (NaLAS) surfactant is investigated by microfluidic small-angle X-ray scatterong (SAXS) at 70 ⁰C. NaLAS is an intrinsically complex mixture of over 20 surfactant molecules, presenting coexisting micellar (L1) and lamellar (Lα) phases. Novel microfluidic devices were fabricated to ensure pressure and thermal resistance, ability to handle viscous fluids, and low SAXS background. Polarized light optical microscopy showed that the NaLAS solution exhibits wall slip in microchannels, with velocity profiles approaching plug flow. Microfluidic SAXS demonstrated the structural spatial heterogeneity of the system with a characteristic lengthscale of 50 nL. Using a statistical flow-SAXS analysis we identified the micellar phase and multiple coexisting lamellar phases with a continuous distribution of d spacings between 37.5 Å - 39.5 Å. Additionally, we showed that the orientation of NaLAS lamellar phases is strongly affected by a single microfluidic constriction. The bilayers align parallel to the velocity field upon entering a constriction and perpendicular to it upon exiting. On the other hand, multi-lamellar vesicle phases are not affected under the same flow conditions. Our results demonstrate that, despite the compositional complexity inherent to NaLAS, microfluidic SAXS can rigorously elucidate its structure and flow response

Mathematical models as research data via flexiformal theory graphs

Mathematical modeling and simulation (MMS) has now been established as an essential part of the scientific work in many disciplines. It is common to categorize the involved numerical data and to some extent the corresponding scientific software as research data. But both have their origin in mathematical models, therefore any holistic approach to research data in MMS should cover all three aspects: data, software, and models. While the problems of classifying, archiving and making accessible are largely solved for data and first frameworks and systems are emerging for software, the question of how to deal with mathematical models is completely open. In this paper we propose a solution -- to cover all aspects of mathematical models: the underlying mathematical knowledge, the equations, boundary conditions, numeric approximations, and documents in a flexi\-formal framework, which has enough structure to support the various uses of models in scientific and technology workflows. Concretely we propose to use the OMDoc/MMT framework to formalize mathematical models and show the adequacy of this approach by modeling a simple, but non-trivial model: van Roosbroeck's drift-diffusion model for one-dimensional devices. This formalization -- and future extensions -- allows us to support the modeler by e.g. flexibly composing models, visualizing Model Pathway Diagrams, and annotating model equations in documents as induced from the formalized documents by flattening. This directly solves some of the problems in treating MMS as "research data'' and opens the way towards more MKM services for models

A pilot study to investigate respiratory ill health in people living with HIV

Background: Helping people living with HIV (PLWH) to maintain long‐term health as they age is central to HIV care and involves monitoring for chronic HIV‐associated co‐morbidities. Chronic lung disease (CLD) is recognised to be more common in PLWH as they age, but UK data on CLD prevalence and phenotype in PLWH are limited, particularly in female, non‐white, never smoking groups, and studies of progression over time are lacking. This pilot study aimed to obtain preliminary data on CLD in these subgroups and establish a simple scheme for monitoring lung health of PLWH for a future longitudinal study. Methods: Cross‐sectional pilot of CLD prevalence among PLWH on ART by age, gender, ethnicity and smoking status using convenience sampling of PLWH attending routine clinics. PLWH completed a web‐based questionnaire of self‐reported chronic cough, wheeze & phlegm production using the BOLD study questions; dyspnoea using the Medical Research Council (mMRC) scale; health related quality of life (EQ‐5D‐5L); respiratory, smoking and other lung exposure history. Forced Expiratory Volume (FEV)1 and Forced Vital Capacity (FVC) were measured by spirometry and z‐scores derived from Global Lung Initiative age, sex and ethnicity predicted values. We extracted HIV data from clinical records and evaluated the suitability and acceptability of the measurements. 50 HIV negative controls matched for smoking status were also assessed. Results: We recruited 150 PLWH, median age 46, 31% female, 47% white. 65% were never smokers, 45% reported childhood exposure to solid cooking fuel. 49% reported a history of PCP, TB or pneumonia and 26% a diagnosis of COPD, asthma or bronchiectasis. All groups had lung ill‐health (table) that correlated with EQ5D5L. Conclusion: CLD may affect all PLWH subgroups. These data and methods can inform a longitudinal study of CLD in UK PLWH

Multi-dimensional modeling and simulation of semiconductor nanophotonic devices

Self-consistent modeling and multi-dimensional simulation of semiconductor nanophotonic devices is an important tool in the development of future integrated light sources and quantum devices. Simulations can guide important technological decisions by revealing performance bottlenecks in new device concepts, contribute to their understanding and help to theoretically explore their optimization potential. The efficient implementation of multi-dimensional numerical simulations for computer-aided design tasks requires sophisticated numerical methods and modeling techniques. We review recent advances in device-scale modeling of quantum dot based single-photon sources and laser diodes by self-consistently coupling the optical Maxwell equations with semiclassical carrier transport models using semi-classical and fully quantum mechanical descriptions of the optically active region, respectively. For the simulation of realistic devices with complex, multi-dimensional geometries, we have developed a novel hp-adaptive finite element approach for the optical Maxwell equations, using mixed meshes adapted to the multi-scale properties of the photonic structures. For electrically driven devices, we introduced novel discretization and parameter-embedding techniques to solve the drift-diffusion system for strongly degenerate semiconductors at cryogenic temperature. Our methodical advances are demonstrated on various applications, including vertical-cavity surface-emitting lasers, grating couplers and single-photon sources

Sframe: An Efficient System for Detailed DC Simulation of Bipolar Analog Integrated Circuits Using Continuation Methods

In this paper we describe an experimental system called sframe which is being incorporated into the design for manufacturability initiative at the Reading Works of AT&T Bell Laboratories. Our system is able to perform detailed and accurate DC analyses of integrated circuits containing several hundred transistors to be fabricated in a relatively complex junction isolated complementary technology