Stability behaviour of composite magnetorheological fluids by an induction method

Este artículo puede consultarse en la siguiente dirección de la editorial: http://jim.sagepub.com/content/early/2015/03/26/1045389X15577656.full.pdf+htmlIn this work we study the stability behaviour of composite magnetorheological (MR) fluids consisting of magnetic (iron) and non-magnetic (poly (methylmethacrylate), PMMA) particles dispersed in mineral oil. Because of the opacity of the suspensions, optical methods traditionally employed for evaluation of the gravitational settling in colloidal suspensions are not suitable for sedimentation follow-up in this case. For this reason, we use an alternative method based on the evaluation of the resonant frequency of the inductance of a thin coil surrounding the sample The movement of the coil along the height of the container at specified steps and time intervals allows obtaining information about the local volume fraction of particles inside the tube. The obtained successive profiles for the multi-component suspensions show a decrease of the iron particle settling and of the initial rate of settling as the PMMA volume fraction is increased. Finally, the increase of the PMMA concentration gives rise to an improvement of the rheological properties upon magnetic field application for a given concentration of iron. Both a strongrheological response and a good colloidal stability are essential for practical applications.Proyectos PE2012-FQM694 (Junta de Andalucía, Spain)y FIS2013-47666-C3-1-R (Ministerio de Economía y Competitividad, Spain). L. R.-A. agrradece a la Universidad de Granada su contrato puente (Plan Propio de Investigación, UGR)

Hyperthermia-Triggered Doxorubicin Release from Polymer-Coated Magnetic Nanorods

In this paper, it is proposed that polymer-coated magnetic nanorods (MNRs) can be used with the advantage of a double objective: first, to serve as magnetic hyperthermia agents, and second, to be used as magnetic vehicles for the antitumor drug doxorubicin (DOX). Two di erent synthetic methodologies (hydrothermal and co-precipitation) were used to obtain MNRs of maghemite and magnetite. They were coated with poly(ethyleneimine) and poly(sodium 4-styrenesulfonate), and loaded with DOX, using the Layer-by-Layer technique. Evidence of the polymer coating and the drug loading was justified by ATR-FTIR and electrophoretic mobility measurements, and the composition of the coated nanorods was obtained by a thermogravimetric analysis. The nanorods were tested as magnetic hyperthermia agents, and it was found that they provided sufficiently large heating rates to be used as adjuvant therapy against solid tumors. DOX loading and release were determined by UV-visible spectroscopy, and it was found that up to 50% of the loaded drug was released in about 5 h, although the rate of release could be regulated by simultaneous application of hyperthermia, which acts as a sort of external release-trigger. Shape control offers another physical property of the particles as candidates to interact with tumor cells, and particles that are not too elongated can easily find their way through the cell membrane.This research work is supported by Junta de Andalucía (PE2012-FQM694); Feder Funds UE; and MINECO Ramón y Cajal programme (RYC-2014-16901)

Synthesis, antibacterial and antifungal activities of naphthoquinone derivatives: a structure–activity relationship study

The synthesis of 1,4-naphthoquinone derivatives is of great interest since these compounds exhibit strong activity as antimalarial, antibacterial, antifungal and anticancer agents. A series of 50 naphthoquinone derivatives was synthesized and evaluated for antibacterial and antifungal activity against Escherichia coli, Pseudomonas aeruginosa, Enterococcus faecalis, Staphylococcus aureus, Candida krusei, Candida parapsilosis and Cryptococcus neoformans using the broth microdilution method. The Candida species were the most susceptible microorganisms. Halogen derivatives of 1,4-naphthoquinone presented strong activity, e.g., 2-bromo-5-hydroxy-1,4-naphthoquinone, which exhibited inhibition at an MIC of 16 lg/ mL in S. aureus, and 2-chloro-5,8-dihydroxy-1,4-naphthoquinone, with an MIC of 2 lg/mL in C. krusei. These compounds showed higher activity against fungi, but the antibacterial activities were very low. The study of structure–activity relationships is very important in the search for new antimicrobial drugs due to the limited therapeutic arsenal

Biomimetic Magnetic Nanocarriers Drive Choline Kinase Alpha Inhibitor inside Cancer Cells for Combined Chemo-Hyperthermia Therapy

Choline kinase a1 (ChoKa1) has become an excellent antitumor target. Among all the inhibitors synthetized, the new compound Ff35 shows an excellent capacity to inhibit ChoKa1 activity. However, soluble Ff35 is also capable of inhibiting choline uptake, making the inhibitor not selective for ChoKa1. In this study, we designed a new protocol with the aim of disentangling whether the Ff35 biological action is due to the inhibition of the enzyme and/or to the choline uptake. Moreover, we offer an alternative to avoid the inhibition of choline uptake caused by Ff35, since the coupling of Ff35 to novel biomimetic magnetic nanoparticles (BMNPs) allows it to enter the cell through endocytosis without interacting with the choline transporter. This opens the possibility of a clinical use of Ff35. Our results indicate that Ff35-BMNPs nanoassemblies increase the selectivity of Ff35 and have an antiproliferative effect. Also, we demonstrate the effectiveness of the tandem Ff35-BMNPs and hyperthermia.This research was funded by the Ministerio de Economía y Competitividad (CGL2013-46612 and CGL2016-76723 projects), Ramón y Cajal programme (RYC-2014-16901) and the Fondo Europeo de Desarrollo Regional (FEDER). Also, this research was aided by the Andalusian regional government (CTS-236)

Effect of Solution Composition on the Energy Production by Capacitive Mixing in Membrane-Electrode Assembly

The final edited version of the paper can be found at: http://pubs.acs.org/articlesonrequest/AOR-c9UMxSzGY3eiU5SENNgT The complete citation is: Ahualli, S.; et al. Effect of Solution Composition on the Energy Production by Capacitive Mixing in Membrane-Electrode Assembly. Journal of Physical Chemistry, 118(29): 15590-15599 (2014). DOI:10.1021/jp504461mOpen access in the Journal on May 26, 2015In this work we consider the extent to which the presence of multi-valent ions in solution modifies the equilibrium and dynamics of the energy production in a capacitive cell built with ion-exchange membranes in contact with high surface area electrodes. The cell potential in open circuit (OCV) is controlled by the difference between both membrane potentials, simulated as constant volume charge regions. A theoretical model is elaborated for steady state OCV, first in the case of monovalent solutions, as a reference. This is compared to the results in multi-ionic systems, containing divalent cations in concentrations similar to those in real sea water. It is found that the OCV is reduced by about 25 % (as compared to the results in pure NaCl solutions) due to the presence of the divalent ions, even in low concentrations. Interestingly, this can be related to the “uphill” transport of such ions against their concentration gradients. On the contrary, their effect on the dynamics of the cell potential is negligible in the case of highly charged membranes. The comparison between model predictions and experimental results shows a very satisfactory agreement, and gives clues for the practical application of these recently introduced energy production methods.The research leading to these results received funding from the European Union 7th Framework Programme (FP7/2007-2013) under agreement No. 256868. Further financial support from Junta de Andalucia, Spain (PE2012-FQM 694) is also acknowledged. One of us, M.M.F., received financial support throughan FPU grant from the Universityof Granada

Temperature effects on energy production by salinity exchange

This is an unedited version of this paper. The publisher version can be reached in this URL: http://pubs.acs.org/doi/abs/10.1021/es500634fIn recent years, the capacitance of the interface between charged electrodes and ionic solutions (the electric double layer) has been investigated as a source of clean energy. Charge is placed on the electrodes either by means of ion-exchange membranes or of an external power source. In the latter method, net energy is produced by simple solution exchange in open circuit, due to the associated decrease in the capacitance of the electric double layer. In this work, we consider the change in capacitance associated with temperature variations: the former decreases when temperature is raised, and, hence, a cycle is possible in which some charge is put on the electrode at a certain potential and returned at a higher one. We demonstrate experimentally that it is thus viable to obtain energy from electric double layers if these are successively contacted with water at different temperatures. In addition, we show theoretically and experimentally that temperature and salinity variations can be conveniently combined to maximize the electrode potential increase. The resulting available energy is also estimated.Departamento de Física AplicadaThe research leading to these results received funding from the European Union 7th Frame-work Programme (FP7/2007-2013) under agreement No. 256868. Further Financial supports from Junta de Andalucía, project FQM 694, and Ministerio de Economía y Competitividad (Spain), project FIS2013-47666-C3-1-R

Materials selection for optimum energy production by double layer expansion methods

NOTICE: this is the author’s version of a work that was accepted for publication in Journal of Power Sources. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Journal of Power Sources (2014) DOI:http://dx.doi.org/10.1016/j.jpowsour.2013.12.125The capacitive mixing procedure for energy extraction based on Double Layer Expansion (CDLE) belongs to the group of so-called CAPMIX techniques, which aim at obtaining energy from the salinity difference between fresh and sea waters. Specifically, the CDLE technique takes advantage of the voltage rise that occurs when sea water is exchanged for river water in a pair of porous electrodes which jointly behave as an electrical double layer supercapacitor. In this article, we deal with some experimental aspects that are key for optimizing the extracted energy, and have not been analyzed yet with sufficient detail. This investigation will help in evaluating those parameters which we need to be fixed in a future CDLE device. These include the charging potential, the durations of the different cycle steps, the load resistance used, and the porosity and hydrophilicity of the carbon.Departamento de Física Aplicada, Universidad de GranadaThe research leading to these results received funding from the European Union 7th Framework Programme (FP7/2007-2013) under agreement No. 256868. Further financial support from Junta de Andalucía (Spain), project PE-2008-FQM3993 is also gratefully acknowledged

Coastal upwelling in the Rías Bajas, NW Spain: Contrasting the benthic regimes of Rías de Arosa and de Muros

Versión del editor0,986