Metallo-Supramolecular Complexation Behavior of Terpyridine- and Ferrocene-Based Polymers in Solution—A Molecular Hydrodynamics Perspective

The contribution deals with the synthesis of the poly(methacrylate)-based copolymers, which contain ferrocene and/or terpyridine moieties in the side chains, and the subsequent analysis of their self-assembly behavior upon supramolecular/coordination interactions with Eu 3+ and Pd 2+ ions in dilute solutions. Both metal ions provoke intra and inter molecular complexation that results in the formation of large supra-macromolecular assembles of different conformation/shapes. By applying complementary analytical approaches (i.e., sedimentation-diffusion analysis in the analytical ultracentrifuge, dynamic light scattering, viscosity and density measurements, morphology studies by electron microscopy), a map of possible conformational states/shapes was drawn and the corresponding fundamental hydrodynamic and macromolecular characteristics of metallo-supramolecular assemblies at various ligand-to-ion molar concentration ratios ( M / L ) in extremely dilute polymer solutions ( c [ η ] ≈ 0.006 ) were determined. It was shown that intramolecular complexation is already detected at ( L ≈ 0.1 ), while at M / L > 0.5 solution/suspension precipitates. Extreme aggregation/agglomeration behavior of such dilute polymer solutions at relatively “high” metal ion content is explained from the perspective of polymer-solvent and charge interactions that will accompany the intramolecular complexation due to the coordination interactions

Conformational properties of biocompatible poly(2-ethyl-2-oxazoline)s in phosphate buffered saline

Inspired by the increasing popularity of poly(2-ethyl-2-oxazoline) (PEtOx) for biomedical applications, this study reports the complete and thorough solution analysis of the homologous series of biocompatible PEtOx samples in a very broad range of molecular weights ranging from 11.2 x 10(3) g mol(-1) up to 260 x 10(3) g mol(-1). The main focus of the research was on the determination of the conformational properties of PEtOx macromolecules at a temperature of 37 degrees C in phosphate buffered saline (PBS) simulating the parameters of physiological media. The polymers were studied in PBS solutions by analytical ultracentrifugation, dynamic light scattering (DLS), translational diffusion, and intrinsic viscosity measurements in a temperature range from 15 degrees C up to 72 degrees C. The complete set of Kuhn-Mark-Houwink-Sakurada scaling relationships revealed linear trends over the whole range of the studied molar masses, while the determined scaling indices at 37 degrees C correspond to the coil conformation in a thermodynamically good solvent ([eta] = 0.045 x M-0.62, s(0) = 0.010 x M-0.46 and D-0 = 1750 x M-0.54). Based on the intrinsic viscosity values (most sensitive characteristic to the size variations of polymer coils, [eta] similar to r(3)), it was demonstrated that PEtOx macromolecules in PBS solutions undergo a transition from swollen polymer coils with gradual deterioration of thermodynamic quality of solutions within the temperature range of 15-45 degrees C, reaching theta-conditions at 55 degrees C with further precipitation at 62-72 degrees C. Also, to the best of our knowledge, the conformational parameters (equilibrium rigidity/the Kuhn segment length and the diameter of the polymer chain) of PEtOx macromolecules were evaluated under physiological conditions for the first time and constitute A = 1.8 +/- 0.3 nm and d = 0.7 +/- 0.4 nm. These equilibrium rigidity values classify PEtOx as a flexible macromolecule with rigidity similar to that of poly(ethylene glycol). For the first time, we were able to demonstrate a direct influence of thermosensitivity on the rigidity of the biocompatible polymer: PEtOx. The Kuhn segment length is undoubtedly decreasing when approaching the LCST

Hydrodynamic Characteristics and Conformational Parameters of Ferrocene-Terpyridine-Based Polymers

Nowadays, the study of metallopolymers is one of the fastest growing areas of polymer science. Metallopolymers have great potential for application in multiple technological and various biomedical processes. The macromolecules with the possibility of varying the number and type of metal ions along the entire length of the polymer chain are of particular interest. In this regard, this study presents results on two successfully synthesized homopolymers, random and block copolymers based on PMMA, containing ferrocene and terpyridine moieties in the side chain. Different architectures of copolymers may attribute interesting properties when creating complexes with various metal ions. A detailed hydrodynamic study of these structures was carried out, the consistency of hydrodynamic data was established using the concept of a hydrodynamic invariant, the absolute values of the molar masses of the studied objects were calculated, and the conformational parameters of macromolecules were determined. Using the Fixman–Stockmayer theory, the equilibrium rigidities of the studied systems were calculated and the relationship between the chemical structure and conformational characteristics was established. The studied copolymers can be attributed to the class of flexible-chain macromolecules. An increase in the equilibrium rigidity value with an increase of the side chain, which is characteristic of comb-shaped polymers, was determined

Conformational Parameters and Hydrodynamic Behavior of Poly(2-Methyl-2-Oxazoline) in a Broad Molar Mass Range

In this work, we report our results on the hydrodynamic behavior of poly(2-methyl-2-oxazoline) (PMeOx). PMeOx is gaining significant attention for use as hydrophilic polymer in pharmaceutical carriers as an alternative for the commonly used poly(ethylene glycol) (PEG), for which antibodies are found in a significant fraction of the human population. The main focus of the current study is to determine the hydrodynamic characteristics of PMeOx under physiological conditions, which serves as basis for better understanding of the use of PMeOx in pharmaceutical applications. This goal was achieved by studying PMeOx solutions in phosphate-buffered saline (PBS) as a solvent at 37 °C. This study was performed based on two series of PMeOx samples; one series is synthesized by conventional living cationic ring-opening polymerization, which is limited by the maximum chain length that can be achieved, and a second series is obtained by an alternative synthesis strategy based on acetylation of well-defined linear poly(ethylene imine) (PEI) prepared by controlled side-chain hydrolysis of a defined high molar mass of poly(2-ethyl-2-oxazoline). The combination of these two series of PMeOx allowed the determination of the Kuhn–Mark–Houwink–Sakurada equations in a broad molar mass range. For intrinsic viscosity, sedimentation and diffusion coefficients, the following expressions were obtained: η=0.015M0.77, s0=0.019M0.42 and D0=2600M−0.58, respectively. As a result, it can be concluded that the phosphate-buffered saline buffer at 37 °C represents a thermodynamically good solvent for PMeOx, based on the scaling indices of the equations. The conformational parameters for PMeOx chains were also determined, revealing an equilibrium rigidity or Kuhn segment length, (A) of 1.7 nm and a polymer chain diameter (d) of 0.4 nm. The obtained value for the equilibrium rigidity is very similar to the reported values for other hydrophilic polymers, such as PEG, poly(vinylpyrrolidone) and poly(2-ethyl-2-oxazoline), making PMeOx a relevant alternative to PEG

New Facet in Viscometry of Charged Associating Polymer Systems in Dilute Solutions

The peculiarities of viscosity data treatment for two series of polymer systems exhibiting associative properties: brush-like amphiphilic copolymers—charged alkylated N-methyl-N-vinylacetamide and N-methyl-N-vinylamine copolymer (MVAA-co-MVACnH2n+1) and charged chains of sodium polystyrene-4-sulfonate (PSSNa) in large-scale molecular masses (MM) and in extreme-scale of the ionic strength of solutions were considered in this study. The interest in amphiphilic macromolecular systems is explained by the fact that they are considered as micellar-forming structures in aqueous solutions, and these structures are able to carry hydrophobic biologically active compounds. In the case of appearing the hydrophobic interactions, attention was paid to discussing convenient ways to extract the correct value of intrinsic viscosity η from the combined analysis of Kraemer and Huggins plots, which were considered as twin plots. Systems and situations were demonstrated where intrachain hydrophobic interactions occurred. The obtained data were discussed in terms of lnηr vs. cη plots as well as in terms of normalized scaling relationships where ηr was the relative viscosity of the polymer solution. The first plot allowed for the detection and calibration of hydrophobic interactions in polymer chains, while the second plot allowed for the monitoring of the change in the size of charged chains depending on the ionic strength of solutions

Strong Linear Polyelectrolytes in Solutions of Extreme Concentrations of One–One Valent Salt. Hydrodynamic Study

Two series of highly charged linear aliphatic polymerssodium polystyrene-4-sulfonate and random copolymer of <i>N</i>-methyl-<i>N</i>-vinylacetamide and <i>N</i>-methyl-<i>N</i>-vinylamine hydrochloridewere studied in water solution without added salts and in solutions containing up to 5 M NaCl. Intrinsic viscosity in salt-free solutions was estimated by a method proposed earlier [Pavlov et al. <i>Russ. J. Appl. Chem.</i> <b>2006</b>, <i>79</i>, 1407–1412]. Molecular characteristics were obtained in 0.2 M NaCl. The polyelectrolytes were studied in more than 10-fold range of molar mass. Qualitatively, the conformational status of the polyelectrolyte chains in different ionic strength was defined with the Kuhn–Mark–Houwink–Sakurada plots normalized by the value of linear chain density. In salt-free solution both polyelectrolytes could be attributed to extra rigid chains with the statistical segment length of 650 nm for sodium polystyrene-4-sulfonate and 100 nm for copolymer chains. Such statistical segment lengths are provided by short-range electrostatic intrachain interactions and are comparable with the Debye screening length. At extremely high NaCl concentration polyelectrolyte chains became discriminated by their degree of hydrophobicity. Chains of hydrophobic nature are compacted up to preglobular state, whereas the chains of the hydrophilic nature stay in the conformation of swelling coils at the highest concentration of NaCl

Amphiphilic Diblock Copolymers Bearing Poly(Ethylene Glycol) Block: Hydrodynamic Properties in Organic Solvents and Water Micellar Dispersions, Effect of Hydrophobic Block Chemistry on Dispersion Stability and Cytotoxicity

Despite the fact that amphiphilic block copolymers have been studied in detail by various methods both in common solvents and aqueous dispersions, their hydrodynamic description is still incomplete. In this paper, we present a detailed hydrodynamic study of six commercial diblock copolymers featuring the same hydrophilic block (poly(ethylene glycol), PEG; degree of polymerization is ca. 110 &plusmn; 25) and the following hydrophobic blocks: polystyrene, PS35-b-PEG115; poly(methyl methacrylate), PMMA55-b-PEG95; poly(1,4-butadyene), PBd90-b-PEG130; polyethylene PE40-b-PEG85; poly(dimethylsiloxane), PDMS15-b-PEG115; and poly(&#603;-caprolactone), PCL45-b-PEG115. The hydrodynamic properties of block copolymers are investigated in both an organic solvent (tetrahydrofuran) and in water micellar dispersions by the combination of static/dynamic light scattering, viscometry, and analytical ultracentrifugation. All the micellar dispersions demonstrate bimodal particle distributions: small compact (hydrodynamic redii, Rh &le; 17 nm) spherical particles ascribed to &ldquo;conventional&rdquo; core&ndash;shell polymer micelles and larger particles ascribed to micellar clusters. Hydrodynamic invariants are (2.4 &plusmn; 0.4) &times; 10&minus;10 g cm2 s&minus;2 K&minus;1 mol&minus;1/3 for all types of micelles used in the study. For aqueous micellar dispersions, in view of their potential biomedical applications, their critical micelle concentration values and cytotoxicities are also reported. The investigated micelles are stable towards precipitation, possess low critical micelle concentration values (with the exception of PDMS15-b-PEG115), and demonstrate low toxicity towards Chinese Hamster Ovarian (CHO-K1) cells